| Opis: |
Maszyny do klejenia krawędzi BRANDT KDF660
używana maszyna
Description: BRANDT KDF 660 Profiline with joint cutter and corner
rounder
PU glue (and hot melt glue)
Workpiece preheating: IR
preheating
Edge material: 0.4 - 15.0 mm
Max. width of
edgebanding: max. 66 mm (at 1 mm band thickness)
Edging material
on the roll: Max. 6 mm to 45 mm, max.0.8 to 65 mm
Workpiece
thickness: Max. 8-60 mm
Control: PC20+ Streckensteuerung with
modem for teleservice
1. Joint milling
2. Chopping knife
3a. Pre-activation with IR heating
3b. Anti adhesive spray
device
3c. Pre-melter, for quick change of adhesive
3d. Glue
aggregate with glue application roller in follow-on or counterflow
3e. Program-controlled pressure zone
4. Capsaws - adjustable 0° -
15°
5a. Coarse milling (Bündig milling) -radial
Milling
units with 2-point adjustment, flat, phase radius up to 12 mm edge
thickness
5b. Fine milling, with program-controlled adjustment for
thickness, plane, phase or radius
6. Corner rounding aggregates -
2 motorized with automatic thickness adjustment
7a. Profile
scrapers for flat, radius or phase scraping, equipped with
quick-change heads
7b. Flat scrapers for perfect surface finish
down to 0.3 mm
8a. Detergent spraying device
8b. Dense
brushes
Glue output in travel or counterflow
Throughput: 8-18
m/min
Connection: 24 kW/400V/50Hz
Tool: Radius
Extraction:
120 + (2x) 100 S4524454 mm
Suction capacity: 3,000 m³/h
Air
consumption: approx.350 L/Min
Compressed air: 6 Bar
Joint
cutters: (2x) 2.2 kW, 200 Hz, FG 3500, clearance: 48 mm, Diameter: 42
mm
Chop saws: (2x) 0.35 kW, 200 Hz, 12,000 rpm
Coarse
milling/pre-milling/radial milling: B/O (2x) 0.55kW, 200 Hz, 12,000
rpm
Fine milling/radial milling: B/O (2x) 0.55 kW, 200 Hz, 12,000
rpm, Program controlled
Copy cutters: (2x) 0.35 kW, 200 Hz, 11,000
rpm
Polishing aggregates: (2x) 0.18 kW, 50 Hz, 150x20 mm
Approx. Onsite Dimension. (l x w x h): 6,400 x 700 x 1,500
mm,
seller offer No. resale 911163
|