Wiertarki magnetyczne (9)

Specyfikacje: - Wydajność wiercenia ok. 32 mm - Uchwyt na wrzeciona wiertnicze MK 3 - Projekcja 70 mm - Piasta ok. 175 mm - 8 prędkości ok. 10 - 420 obr./min - Napęd 42 V / 960 W - Podstawa magnetyczna 100 x 220 mm - Podstawa magnetyczna lewa + prawy obrotowy uchwyt wiertniczy - Wymagana przestrzeń ok. W 300 x H 700 x D 460 mm - Waga ok. 49 kg - Transformator bezpieczeństwa – transformator oddzielający fein, typ ESB 1000 - Prąd pierwotny 220 V - Prąd wtórny 42 V - Wymagana przestrzeń ok. W 300 x H 350 x D 350 mm - Waga 27 kg

wyposażony w automatyczny system chłodzenia; nieużywana; w walizce; 5637 Auction-ID: A1-45901-309

wyposażony w automatyczny system chłodzenia; nieużywana; w walizce; 5637 Auction-ID: A1-45901-308

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1055 €: 12 mm: 19 mm Weldon : 1.1 kW: 400 mm: 126 mm: 185 mm: 10 kg: 12 mm: 40 mm: 40 mm: 45 mm: 370 U/min: 6 mmPRO-40 AD is a low profile mag drill, that fits in the tightest of spots.Perfect solution for any applications in confined spaces, wheretypical mag drills are too large.Its powerful motor enables drilling of holes up to 40 mm (1-9/16”) in diameter and up to 40 mm (1-9/16”) deep.An innovativeultra-strong magnetic base with high performance on air gaps makes it possible to work even on painted, rusted or thin surfaces.Magnetic Power Adhesion Control (MPAC) protects both the drill and the operator from working on too thin or inadequate surfaces,preventing the motor from engaging if the adhesive force is dangerously low.PRO-40 AD accepts both TCT and HSS cutters as well as twist drill drills with 19,05 mm (3/4”) Weldon shank.Featu ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 €: 25 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 505 mm: 18 kg: 25 mm: 70 mm: 75 mm: 190 mm: 120-190 / 290-450 U/min: 8 mmThe PRO-72T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steelgrade or tool type.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Electro ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 995 €: 23 mm: 19 mm Weldon : 1.15 kW: 331 mm: 254 mm: 456 mm: 155 kg: 23 mm: 50 mm: 50 mm: 160 mm: 240 / 480 U/min: 6 mmPRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed forwork with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA(finite element analysis) software extends tool life and enables depth of cut up to 75 mm.Compact design along with innovative smart magnet with reduced weight make it a lightweight machine.PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protectsboth the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC).PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% o ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1595 €: 23 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 500 mm: 17 kg: 23 mm: 50 mm: 75 mm: 190 mm: 160 - 250 / 390 - 580 U/min: 8 mmThe PRO-52T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 50mm (2”) and drilling capacity up to 23 mm (7/8”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steel gradeor tool quality.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Ele ...