pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Largeur de la tôle : 400 mm Épaisseur de la plaque : 6 mm Longueur de la plaque : 0-6000 mm Vitesse : 90 m/min Coupe transversale du matériau : 1200 mm² Puissance totale requise : 6 kW
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Spécifications: Capacité 300 à Cadence 35 coups Largeur du piston 1000 mm Saillie 450 mm Course du piston 20 - 140 mm Réglage du piston 80 mm Puissance du moteur 30 cv Poids approximatif estimé à 18 tonnes
format papier max. : 30x21 cm N° de série : 1888 tension : 400 V
Spécifications: - Force de compression 60 t - Projection 350 mm - Taille de la table env. 900 x 600 mm - Table réglable en hauteur - Trou de diarrhée dans le tableau env. 300 x 200 mm - hauteur maximale d’installation env. 360 mm - Stösselfläche env. 340 x 160 mm - Trou de cône dans la fiche 40 mm - Réglage de la fiche 60 mm - Réglage de la course 10 - 90 mm - Taux de course 110 1/min - 2 Opération à la main - Connexion pneumatique 6 bar - Entraînement par volant d’inertie / vitesse réglable à l’infini - Accouplement rotatif - Entraînement 400 V / 5,5 kW - Espace requis env. L 2000 x H 2200 x P 2400 mm - Poids env. 4500 kg - alimentation mécanique mabu type ZPL 11 avec redresseur à 3 rouleaux
Une presse de traction hydraulique Müller modèle CLZ.100.1.34, Bj. 1994, bon état, avec uvv, Siemens S7 commande d’écran, décharge 400 mm, hauteur de montage 800 mm, surface de table 800 x 730 mm, hub 600 mm, coussin 40 to., coussin de tirage 200 mm.
CNC Graveuse MÜLLER LCF - 2 Voies de circulation : X 375 mm Y 570 mm Z 90 mm 0.321020121002 Données: Taille de la table 700 mm x 480 mm Poids : 50 kg Dimensions extérieures: Longueur : 700 mm Largeur : 500 mm Hauteur : 350 mm Accessoires : Calculatrice Écran Clavier Souris Logiciel Contrôle Kress Fräser Pompe à vide Vanne Brouillard pulvérisateur Je m’en occupe. Pinces de serrage et fraises - NOUVEAU
ChaîneStemmer Mueller Mur L x W x H: 60 x 40 x 170 cm Poids d’environ 270 kg Construit en 1973 La machine est en bon état, prête à fonctionner. Changements, erreurs, vente intermédiaire réservée ! Service/pièces détachées par MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Système MATEC-technik GmbH Ingénierie mécanique Tapis de moulin 4 CH-4952 Eriswil/Suisse Tél. 0041 62 966 18 32 Fax 0041 62 966 21 12
Nouvelle machine pour le traitement : bois, plastique, PVC, GRP, plexiglas, métaux non ferreux comme l’aluminium, le laiton, etc. Données techniques : Dissolution: 0.0018 mm X-Y-Z Précision filézoïdales 12x3 mm Tous les fuseaux d’entraînement sont 3 fois sans jeu Taille de la table : environ 506 mm x 320 mm Voyage: x environ 215 mm, y environ 375 mm, par exemple environ 90 mm Passage environ 78 mm Prix et autres tailles sur demande
