Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Tube diameter outside: 180 mm -Piston: Ø 115/145 mm -Stroke: 620 mm -Weight: 87 kg
NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg
（2013）400吨穆勒指节压机 高精度转向节冲压机用于高速成形 这台2013年款穆勒压机具备4000千牛的压片能力和高效 每分钟55冲程循环速率。该机为现代工业精密设计， 备适合大规模生产环境的安全响应时间。 技术细节 机器类型：指节冲压机 制造商：Müller 型号类型：KNP 400 机器编号：2703 制造年份：2013年 名义兵力：400吨 工作容量：13千焦耳 冲程：70毫米 拉姆调节：45毫米 冲刺频率：55冲/分钟 关闭高度（桌子到滑杆）：380 mm（行程向下，调节上） 滑块表面积（宽×深）：500毫米×400毫米 桌面表面积（宽 x 深）：500 mm x 500 mm 电机输出功率：15千瓦 工作电压：400 V 安全距离：190毫米 限制值（停止时间）：95毫秒 总重量：16,500公斤 机器尺寸（宽 x 宽 x ...
（2000年）1000吨穆勒指节压机 高容量精密节节压机 这款现代型号在压迫功率上实现了重大飞跃，拥有10,0 00千牛的巨大容量，专为大规模精密操作设计。 技术细节 机器类型：指节冲压机 制造商：Müller 型号：KNP 1000 机器编号：2912 制造年份：2000年 名义兵力：1000吨 工作容量：33千焦 冲程：100毫米 内存调节：65毫米 冲动频率：40次冲程/分钟 闭合高度（桌子到滑槽）：400 毫米 内存表面积（宽 x 深）：700 mm x 500 mm 桌面表面积（宽×深）：700毫米 x 750毫米 电机输出功率：30千瓦 工作电压：400 V 安全距离：225毫米 限制值（停止时间）：97毫秒 总重量：42,000 公斤 机器尺寸（宽 x 宽 x 高）：2.3 米 x 3.4 米 x 4.1
（1983年）125t Müller Eccentric Press 重型机械压机 1983年生产的坚固偏心冲压机，额定推力为125吨，冲程 可调，非常适合精密成形和重载生产。 技术细节 机器类型：偏心式印刷机 制造商：Müller 机器编号：1204 制造年份：1983年 型号：EPR/R125 正常名义力量：125吨 最大名义力量：135吨 滑动行程（可调节）：20 – 120 mm 内存可调节：80毫米 重量：8,250 公斤 电机功率：11千瓦 工作电压：380 V 安全距离：205毫米 制动系统：配备Ortlinghaus辅助制动系
（1992） 125t Müller Eccentric Press 多功能机械成形解决方案 这款偏心冲压机的名义压制能力为125吨，设计用于可 且高效的机械成形操作。该机具可调节的冲程范围 20–120毫米，并可额外调节80毫米，为各种工装和生 需求提供了灵活的安装选项。 技术细节 机器类型：偏心式印刷机 制造商：Müller 机器编号：3010 制造年份：1992年 型号：EPR/RH125ST 名义载重：125吨 滑动行程（可调节）：20 – 120 mm 内存调节：80毫米 总重量：9,000 公斤 电机功率：11千瓦 工作电压：380 V 安全距离：185毫
Ref.No. 00909 工厂名称：带钢直线 制造商：Werner Müller Stanz Umformtechnik BRMU-065 – 01 – 05型 带有CE标志 建设年份 2010年 机器工时 3500小时 皮带宽度最大120毫米 材料厚度最大5毫米 材料厚度：最小（钢）0.7毫米 最高速度：30米/分钟 电机功率 2.4千瓦 直直滚轮直径65毫米 进料滚轮直径97.5毫米 进给速度 +- 1毫米 技术状况 好的 提交日期 立即
报价25450 规格： - 压缩力 100吨 - 投影 300毫米 - 桌面尺寸约650 x 450毫米 - 高度可调的桌子 - 桌子上的腹泻孔，约200 x 100毫米 - 大型安装高度，约450毫米 - 柱塞面积 70 x 140 毫米 - 滑柱上的销孔 40 x 80 毫米 - 挺杆可调节性 60毫米 - 行程调整 10 - 100 毫米 - 行程频率：80转/分钟 - 气动辅助联结 - 驱动 380 V / 5.5 千瓦 - 空间需求约 宽1350 x 高 2550 x 深1600毫米 - 重量约 5000公
二手
压力：1250 KN， 划水速度：55 min-1， 柱塞调节：75 毫米 行程：20-120 毫米， 电机功率：11 kW， 电压：380 V 机器重量：8.6t 投影：340 毫米， 推杆夹紧面：620 x 300 mm， 工作台夹紧面：650 x 1000 毫米， 带双制动器的 Ortlinghaus 液压离合器， 双手控制装置 杵的拆除经过专业修复
- 压力承受能力：22吨 - 投影：175 毫米 - 行程：120 1/分钟 - 柱塞调节：50 毫米 - 工作台高度调节 50 毫米 - 行程调节：8-80毫米 - 桌子：520 x 400 毫米 - 柱塞：250 x 160 毫米 - 带耳轴夹紧的螺丝扣，D35 mm - 电机功率 1.5 kW - 运行非常平稳 - 旋转楔形联轴器的机械分离 气动气缸 - 气动脚踏开关 - 无UVV - 4 个机脚 - 连接电缆 CEE 插头 16 A - 带快速接头的空气连接 - 重量：约2,000公斤 - 尺寸：宽 820 x 深 1100 x 高 1800 毫
pressure: 60 t throat: 280 mm stroke: 10-140 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 740x560 mm ram surface: 380x195 mm hole in the table: 300x200 mm table height: 760 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 35 t throat: 220 mm stroke: 8-96 mm no. of strokes: 120 Hub/min ram - range of adjustment: 50 mm table surface area: 580x440 mm ram surface: 305x170 mm hole in the table: 215x175 mm table height: 870 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 45 t throat: 230 mm stroke: 4-80 mm no. of strokes: 120 Hub/min ram - range of adjustment: 55 mm table surface area: 695x455 mm ram surface: 365x180 mm hole in the table: 220x180 mm table height: 890 mm tool hole in ram: Ø 40 mm weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 t throat: 300 mm stroke: 10-140 mm no. of strokes: 60 Hub/min ram - range of adjustment: 60 mm table surface area: 800x500 mm ram surface: 430x230 mm hole in the table: Ø150 mm table height: 860 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 62 t distance between columns: . mm stroke: 360 mm Table area: 2500x580 mm dayligth: 400 mm diameter - coniflex cutter: Zilinderdurchmesser 200 mm 0: 200 bar Stud passage: 590 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Video: https://www.youtube.com/watch?v=gkuLoo7ABkc The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team ...
pressure: 800 t distance between columns: 3550 mm stroke: 1100 mm distance table/ram, max. stroke up, adjustment up: 1900 mm table surface area: 3500 x 1800 mm die-cushion pressure inside the table: 350 t stroke of drawing cushion in table: 295 mm die-cushion pressure in pusher: 80 t stroke of drawing cushion in pusher: 160 mm ram surface: 3500 x 1800 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled sliding table: without rails for travel total power requirement: kW weight of the machine ca.: 265 t dimensions of the machine ca.: m overhauled in 1998 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1600 t distance between columns: 3160 mm ram stroke: 1450 mm distance table/blankh.,max. stroke up,adjustm. up: 2250 mm table surface area: 4000 x 2200 mm ram pressure: 1000 t pressure of blank holder: 600 t stroke of blankholder at the bottom: 1000 mm stroke of blankholder with adjustment 0-100 mm: 1450 mm blank holder size: 4000 x 2200 mm die-cushion pressure inside the table: 360 t stroke of drawing cushion in table: 275 / 400 mm ram surface: 4000 x 2200 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled oil volume: 9000 l total power requirement: 390 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 6,0 x 4,3 x 10,5 m Head press (1600 tons) of a press line with five subsequent presses (800 tons) The data for this ad was created with ModulMWS - the software solution of LogoTech o ...
pressure: 125 t no. of strokes: 55 Hub/min stroke: 20 - 160 mm table-size: 970 x 660 mm max. ram stroke: 160 mm min. ram stroke: 20 mm throat: 340 mm total power requirement: 11 kW weight of the machine ca.: t dimensions of the machine ca.: 1,5 x 3,0 x m With motor, gear reduction, wheel protection, air friction clutch, additional brake (Make Desch) and safe control according to UVV, Mech. Overload protection in the ram Two-hand operation, control cabinet The price is ex stock as the press is, is, or is. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 t distance between columns: 2560 mm stroke: 1050 mm control: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1870 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 300 t stroke of drawing cushion in table: 395 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 200 mm die-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kW weight of the machine ca.: 150 t dimensions of the machine ca.: 4,95 x 3,3 x 10,2 m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 t distance between columns: 2600 mm stroke: 900 mm distance table/blankh.,max. stroke up,adjustm. up: 1600 mm table surface area: 2500 x 1730 mm die-cushion pressure inside the table: 250 t stroke of drawing cushion in table: 400 mm die-cushion pressure in pusher: 63 t stroke of drawing cushion in pusher: 150 mm ram surface: 2500 x 1730 mm column travel -side: 1100 mm die-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m overhauled in 2005 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 360 mm stroke: 560 mm total power requirement: 33 kW weight of the machine ca.: 6000 kg dimensions of the machine ca.: 2000x2400x3650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 52/80 Hub/min ram - range of adjustment: 60 mm table surface area: 850x550mm mm ram surface: 420x220 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø 45 mm weight of the machine ca.: 4,5 t dimensions of the machine ca.: 2000x2000x2700mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 280 mm stroke: 10-100 mm no. of strokes: 85 Hub/min ram - range of adjustment: 60 mm table surface area: 820x530 mm ram surface: 260x210 mm hole in the table: Ø 120 mm table height: 850 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 160 t throat: 350 mm stroke: 20-140 mm stroke of worktool slide: 40-60 Hub/min ram adjustment: 75 mm total power requirement: 15 kW weight of the machine ca.: 10 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 t throat: 285 mm stroke: 10-100 mm no. of strokes: 65 Hub/min ram - range of adjustment: 60 mm table surface area: 850x640 mm ram surface: 420x210 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,2 t dimensions of the machine ca.: BxTxH 2500x2500x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
压力：2 T 柱间距离：- mm 行程：？ mm 喉：？ mm 总功率要求：kW 机器重量 ca.： t 机器尺寸 ca.： m 油压机 2t 驱动：0
pressure: 60 t throat: 280 mm stroke: 10-90 mm no. of strokes: 110 Hub/min ram - range of adjustment: 60 mm table surface area: 750x540 mm ram surface: 600x200 mm hole in the table: 300x200 mm table height: 780 mm tool hole in ram: Ø35 mm weight of the machine ca.: 3,7 t dimensions of the machine ca.: 1800x1800x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
规格： 容量 300 至 冲程率 35 冲程 柱塞宽度 1000 mm 投影 450 mm 柱塞行程 20 - 140 mm 柱塞调节 80 mm 发动机功率 30 马力 重量粗略估计18
