最大尺寸 68 x 104 厘米 建设年份 2003年 导航员控制 Rapidset - 折叠口袋的电动格式调整 托盘给料机FP 700 真空升降机 Vivas（真空皮带 + 真空） 第一站：6个折叠口袋，68厘米 下游刀轴 第二站：4折叠口袋，68厘米 下游刀轴 冷胶用的胶合装置HHS 棚屋延伸 ASP 66-2 ME 送货日期：立即从库存
Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: MB, Router mbnet mini -Type: MDH 860 -Voltage: 12-24 V -Dimensions: 95/70/H35 mm -Weight: 0.4 kg
table diameter: 340 mm table load: 160 horizontal kg. table load: 100 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,6 - 6,0 U/min bore: 60,0 mm motor: 230 Volt weight of the machine ca.: 56 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating ins ...
total power requirement: 230 Volt table diameter: 300 mm table load: 100 Horizontal kg swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,0 U/min turning speeds: 1,2 - 12,0 U/min bore: 20,0 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The devices control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software ...
table diameter: 500 mm table load: 300 horizontal kg. table load: 150 vertikal kg. swivelling range: 0 - 90 Grad turning speeds: 0,2 - 2,5 U/min bore: 90,0 mm table height: ~ 650 mm mm motor: 230 Volt weight of the machine ca.: 90,0 kg. range L-W-H: 385 x 340 x 375 mm Furnishing: - The table can be tilted and clamped at an angle of 0 ° to 90 ° - manual tilting - Start / stop via location-independent foot switch - Direction of rotation can be selected right / left - Adjustable rotation time - The control of the welding machine via control - 350 amp ground connection Scope of delivery: - control (integrated) - foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
table diameter: 340 mm table load: 290 horizontal kg table load capacity: 190 vertikal kg turning speeds: 0,6 - 6,0 U/min spindle bore: 60,0 mm swivelling range: 0 - 90 Grad weight of the machine ca.: 62 kg dimensions of the machine ca.: 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions ...
table load: 1000 kg table diameter: 900 mm turning speeds: 0,12 - 1,2 U/min swivelling range: 0 - 135 Grad speed: Kipp 0,35 U/min welding current: 500 A dimensions of the machine ca.: 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : - 1 control (integrated) - 1 wired remote control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
宽 52 厘米 建设年份 2002 自动折纸机 带显示器的计算机控制 带吸头的平堆给料机 FSA 52 第一工位：4 个 52 厘米的折叠袋 下游刀轴 二工位：4 个 52 厘米的折叠袋 第 3 工位：2 个 38 厘米的折叠袋 棚展 价格另询。 我们在全球范围内交付和安装
二手
带扣：最大 4 件 纸张尺寸：52 x 85 厘米 序列号：984580044 速度：200 米/分钟 最大折叠深度 46.5 厘米 纸重 40-250 克/平方米 全尺寸 10 x 12 厘米
带扣：4 个 刀具：0 个 最大纸张尺寸： 52 x 85 cm 系列号： 98979071 速度：200 m/min 电压：3 x 400 V 频率：50 Hz 尺寸：3 x 1m + 1.80 x 1 m 折叠深度最大 46.5 cm 纸张克重 40-250 g/m² 全尺寸 10 x 12 cm
Number of sanding units: 2 St. sanding width: 100,150 mm Sanding height max.: , The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ersatzteile - 备件 MB Multipli 382 2 个折叠扣 MB 382 带 MB 382 在线视频检查 Skype视频 检查 我们非常高兴您的光临 - 更多机器现货 立即可用 - 可检查 现货 Emskirchen / 纽伦堡 - 可测试
Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464S Serial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test
