Martin T25 Schwenkspindelfräse mit 2 Achs-elektrische Verstellung Marke: Martin Typ: T25 M-Nr.: V175170 Baujahr: 1990 Motor: 5/6 kW Schwenkung Frässpindel: -5° – +45° Fräsdorn: 30 mm Spindelhöhenverstellung: 150 mm (elektrische Einstellung) Drehzahlen: 3000/4500/6000/9000 U/min (2 Drehzahlmotor) Konus der Frässpindel: MK5 Softstarter: Automatischer Frässpindel-Anlauf/-bremsung per Drehknopf Systemsteuerung: Unteres Spindelverstellung: Elektromotorhöhenverstellung mit Analog-Auslesung Schrägstellung -5° – +45°: -5° – +45° Elektromotorschräge mit digitaler Lesart Fräsanschlag: Aigner Intergraal Anschlag Zustand: Voll funktionsfähig getestet
MARTIN T90 4-zijdige schaaf en profileersautomaat met 7 schaafassen, NC gestuurde hoogte en breedte verstelling Spezifikationen: Manufacturer: MARTIN Type: T90 Profil with 6 spindels (Optional 7 spindels) Year: Completely rebuild and resprayed Infeed table: 2000 mm + 1.000 mm extension Infeed tabel height adjustment: Max. planing thickness 10 mm Infeed fence: Max. planing thickness 10 mm Planing width: 12 – 240 mm (260 mm possible when using axial hollowed tools) Planing thickness: 8 – 170 mm Planing spindle: Spindele 1 – horizontal max. 12 mm, 240 mm nett working width, tooldiam. Min. ø100 mm – max Ø125m ø100- max. ø125 mm Planing- / Contour spindels: Spindels 2 & 3: Vertical spindels max. 12 mm, working height max. 170 mm, tooldiam. min. ø125 mm ø125 mm Profiling spindels: Spindle 4: Horizontal spindel max. 8.5 mm, working width 240 mm, tooldiam. Min. 100 mm – max. Ø12 ...
Martin T52 Jointing planner Manufacturer: Martin Type: T52 Year: 1988 Machine Nr: V 155643 Motor: 5,5 kW (7,5HP) Cutterhead: 5.000 rpm Z-4 Tersa Diameter of cutterhead: ø125 mm Working width: 500 mm Cutterlenght.: 510 mm Planing dept: 8 mm (max. allowed by law, but technically upt 16 mm) Length of Table: 2840 mm Length of infeed table: 1640 mm Length of outfeed table: 1200 mm Table Height: 800 mm Fence: 1.100 165 mm Fence-tilting: 45° Weight: ca. 950 KG Condition: Fully functional
Martin T52 Jointer/planner Manufacturer: Martin Type: T52 Year: 1987 Machine Nr: V 151674 Motor: 5,5 kW (7,5HP) Cutterhead: 5.000 rpm Z-4 Diameter of cutterhead: ø125 mm Working width: 500 mm Cutterlenght.: 510 mm Planing dept: 8 mm, footpedal table height setting with counter in table Length of Table: 2840 mm Length of infeed table: 1640 mm Length of outfeed table: 1200 mm Table Height: 800 mm Fence: 1.100 165 mm Fence-tilting: 45° Weight: ca. 950 KG Condition: Fully functional
Martin T72A sliding table saw Hydraulic saw tilting with digital display at eye-level Hydraulic saw elevation with digital display at eye-level NC-controlled parallel fence Cross-cut fence with 2-point stops Scoring saw Manufacturer: MARTIN Type: T72A Comfort M-Nr.: V403081 Year: 1999 Control panel: Eye-level integrated in dust extraction cover, LCD displays showing saw height, -saw tilting angle, width/parallel fence positioning; scoring saw positioning Saw blade elevation: Hydraulic footpedal elevation 0 – 170 mm – with LCD display Saw blade tilting: Hydraulic footpedal tilting 0 – 46° – with LCD display Parallel fence Positioning: Handwheel positioning (frontsidemachine) – digital reading on central control Dust cover top: Electrically controlled elevation Manual sideward positioning for large objects sawing Cross-cut table: Aluminium swivelling table suitable for mitre cut ...
Martin T71 sliding table saw Manufacturer: Martin Type: T71 M-Nr.: 1982 Year: V123342 Mainsaw: max. ø450 mm, max Sawheight: 170 mm, Saw tilting: 0° – 46° Scorer: No RPM: 2.800/4.000/5.500 tpm Motor: 5,5 KW Sliding table: 1.900 mm Width: 1.250 mm Cross cutfence: Length measuring fence 2.200 – 3.300 mm with 2 -point system Cross cut table: with fixed positions for most used angles Dustextraction: Top: ø80 mm, Bottom: ø140 mm Weight: 1.200 KG
Martin T17 with tilting saw Manufacturer: Martin Type: T17 M-Nr.: V070521 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Yes Main saw: kW Speed: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm Saw Blades: ø450 Cutting Heigt: 147mm Blade Width: 0 – 45° Cutting Width: 1.050 mm Condition: Volledig functioneel
Martin T72A sliding table saw with electric saw elevation, -tilting, NC-controlled parallel fence, cross-cut fence with 2-point stops and mitre cross cut table Manufacturer: MARTIN Type: T72A M-Nr.: V238101 Year: 1997 Control panel: Eye-level integrated in dust extraction cover, electric saw elevation, -saw tilting, NC-controlled parallel fence positioning; Saw blade elevation: Electric controlled – digital reading on central control Saw blade tilting: Electric controlled – digital reading on central control Parallel fence Positioning: NC-controlled with digital reading on central display Sidetable: Mitre cross cut table, Cross cut fence: Aluminium: 2.200 mm, extendable upto 3.300 mm, with Digital 2-point stops Main saw: max. ø450 mm, bookthickness; 0-170 mm, tilting 0° – 46° RPM: 2.800/4.000/5.500 RPM Motor: 5,5 KW Sliding Table: 3.300 mm Parallel fence Positioning: 1.250 mm Du ...
MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control; parallelogramtable as 5. ax integrated in central control, plus 3-ax Scoring Saw Manufacturer: MARTIN Type: T74 AUTOMATIC – Radio Control Year: 2008 M-Nr.: V484794 YouTube:
Martin T17 with tilting saw Manufacturer: Martin Type: T17 Year: 1972 M-Nr.: V95358 Table Size: 1030 x 1050 mm. Table Heigt: 800mm Sliding Table: Ja Main saw: 4 kW RPM: 2800 – 4000 – 5500 tpm Saw Blade Arbor: ø30 mm. Saw Blades: ø450 mm Cutting Heigt: 147mm Blade tilting: 0 – 45° Cutting width: 1.050 mm
Martin T60C-automatic panel saw Manufacturer: Martin Type: T60 Classic M-Nr.: V482223 Year: 2008 Martin T60C V482223:
MARTIN T74 Radio Control – sliding table saw, with 4-ax CNC control and 5. ax integrated and 3-ax Scoring Saw Aggregate Manufacturer: MARTIN Type: T74 AUTOMATIC met 3–as voorrits en parallelogram tafel Year: 2007 M-Nr.: V471539 YouTube: Touchscreen: 10.4″ touchsreen full colour, ate eye level, swivelling Table Size: 1.350 x 1.500 mm in grey cast iron; table extension 600400 with storage Table Heigt: 900mm Sliding Table: 3.300mm Main saw: 5.5 kW Saw Blade Arbor: Main saw blade arbor: 30 mm Ø; two 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 500 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: CNC-controlled max. 170 mm when Ø500 mm Blade tilting: CNC-controlled 0 – 46° Cutting Width: CNC-controlled, max. 1.350 mm; can be lowered under table level in i ...
Martin T75PreX (246° tilting) and RadioCompens (length compensation for angular cuts) Manufacturer: Martin Type: T75PreX Year: 2012 M-Nr.: V519664 Control: 10.4″ Touch-Screen at eye-level, turning-swivelling with blocknote holder 3-ax CNC-controlled plus 4th and 5th manual axes integrated in centra control system Table Size: 1.350 x 1.500 mm in grey cast iron; table extension as standard, Table Heigt: 900mm Sliding Table: 3.700mm Main saw: 9.5 kW frequency controlled Saw Blade Arbor: Ø30 mm main saw blade arbor, 2 pcs 10 mm drive pins Saw Blade replace: ProLock” quick change system Saw Blades: Ø 250 – 550 mm; saw blades up to Ø 400 mm can be lowered below table; saw blades up to Ø 400 mm can be used with scoring blades Cutting Heigt: 204 mm. Blade Width: -46° tot +46° Cutting Width: 1.350 mm Scoring Blades: 3-ax electric controlled scoring saw aggregate Cross cut table: Para ...
MARTIN T73 AUTOMATIK, Parallelogramtisch, angetriebener Rollwagen, 3-Achs Steuerung Mark: MARTIN Type: T73 AUTOMATIC Baujahr: 2001 M-Nr.: V424244 Tischabmessung: 1.350 x 1500 mm. Tischhöhe: 900mm Besäumtisch: 3.300mm Hauptsäge: kW Sägeblattwelle: ø 30 mm. mit zwei Mitnehmerstifte Sägeblattwechsel: Schnellwechselsystem ProLock” Sägeblatter: Ø 250 – 500 mm; bis Ø 400 mm unter Tisch versenkbar; Schnitthöhe: 170 mm. (Sägeblatter. 500 mm.) Sägeblatteschwenkung: 0 – 46° Schnittbreite: 1.350 mm Parallelanschlag: Anschlaglineal in eloxiertes Aluminium; Endstellung; Automatisch unter Tischebene absenkbar Längenanschlag: Digitaler Längenanschlag aus eloxiertes Aluminium mit Martin 2-Punkt Anschläge Steuerung: NC-Steuerung mit LCD-Anzeige der Breite, Höhe- und SchrägeWinkel, plus 2 digitale Längenanschläge Bildschirm: LCD Bedienpult auf Augenhöhe, wegschwenkbar mit Tablea ...
Martin T60C-Automatic panel saw Manufacturer: Martin Type: T60C-AUT M-Nr.: V474295 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Scoring saw: Yes 3 Ax-controlled Sliding table: 3.300 mm Width: 1.250 mm Side table: steel, galvanised, with angle pre-fix 0º, 22,5º, 30ºen 45º; dimensions: 1.340650 mm Cross cutfence: 2.200 – 3.300 mm with digital reading, 2 flipstops on bearing guided rollers and fine-setting Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition
Martin T60 Classic panel saw Manufacturer: Martin Type: T60C M-Nr.: V447804 Year: 2007 Control panel: Eye-level integrated in dust extraction cover 2-ax control + 3rd-ax integrated in central control, but handwheel setting (Saw height, tilting, width) Mainsaw: ø400 mm, bookthickness; 0-130 mm, tilting 0° – 46° RPM: 4.000/4.800/6.000 rpm Motor: 5.5 KW Sliding table: 3.000 mm Width: 1.250 mm Cross cut table: Steel, galvanized with fixed angle stops 0º, 22,5º, 30ºen 45º; dimensions: 1.340 650 mm Cross cutfence: 2.200 – 3.300 mm with analog tape measurement, flipstop with magnuifying glass Dustextraction: Top: ø100 mm, bottom: ø120 mm Weight: 1.400 KG Condition: fully functional – in good condition
Martin T60C-Automatik Formatkreissäge Marke: Martin Type: T60C-AUT M-Nr.: V477921 Baujahr: 2007 YouTube:
Martin T25 tilting table spindel moulder with 2-axl electric positioning Manufacturer: Martin Type: T25 M-Nr.: V172604 Year: 1990 Motor: 5/6 kW (2 RPM drive motor) Tilting: -5° – +45° Spindle diameter: 30 mm Spindle elevation: 150 mm (electrical adjustment) Rotation speed: 3000/4500/6000/9000 U/min (2 RPM drive motor) Spindel pick-up: MK5 Table: Table extension 2.500mm with extendable support (pull-out for wide workpieces) Softstarter: Automatic spindel softstart/- braking Control panel: Eye-level with digital read-out Spindel elevation: 150 mm elelvation electric with digital read-out Spindle tilting: ‘-5° – +45° Electric with digital read-out Feeder: Five-pole socket via central control Condition: Fully functional Optional: Aanvoerapparaat: Not included Aigneraanslag: Not included
Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 with 7.5 kW frequency controlled spindle RPM Machine Nr.: 20000 Year: V415216
Martin T26 tilting table spindel moulder with 2-ax electric control and 7.5/9.5 kW 2-speed motor Manufacturer: Martin Type: T26 M-Nr.: 2005 Year: V453599 Control: electrical spindel-elevation, -tilting,-feeder elevation, manual fence positioning with digital reading Control panel: machine stand Motor: 7.5/9.5 KW 2-speed motor rpm Spindel : ø40 mmSK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: 2-speed motor 7.5/9.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: 1255 x 900 x 95 mm from cast iron Ax-control: 1. Digital-electric controlled spindle height setting, with automatic milling dept. Compensation when spinlde is tilted 2. Digital-electric controlled spi ...
Martin T21 Manufacturer: Martin Type: T21 Year: Motor: 4 KW Table: 1.000930 Table height: 850 mm Konus spindle: MK5 Spindel height adjustment: 150 mm RPM: 3000/4500/6000/9000 U/min Spindle: 40 mm Max. tool diam.: 250 mm Weight: 700 KG Brake: Footbrake Dust collection: ø120 ø100 mm
Martin T25 tilting table spindel moulder with 5-axl CNC control Manufacturer: Martin Type: T25 M-Nr.: V252368 Year: 1998 Motor: 7.5/9.5 kW oder 10/13 BHP, 2 RPM Dalander motor Tilting: -5° till +45° Spindel diam.: 30 mm Spindel pick-up: ISO-quick change Spindel elevation: Spindle height adjustment: 150 mm Rotation speed: 3000/4500/6000/9000 U/min Table: Table extension 2.400mm with extendable support (pull-out for wide workpieces) Control panel: CNC control at eyes height with LCD screen Spindel elevation: CNC-controlled with electric elevation (programm controlled of hand switch setting) Spindel tilting: CNC-controlled with electric tilting, angle: -5° +45° (programm controlled of hand switch setting) Fences: CNC-controlled with electric positioning vs. spindel position (programm controlled of hand switch setting) CNC-controlled with electric positioning infeed vs. outfeed fence (pr ...
MARTIN T27 FleX with 4-ax CNC control + 5-ax manual controlled but integrated in central control + electric feeder elevation Year: 2007 Tilting: from -46° to +46° T27FX/1-a: T27 FleX tilting spindle moulder CE-norm with 7,5KW/10 HP motor and variable speed – frequency controlled CNC controlledspindle elevation CNC controlled tilting with automatic height adjustment when tilted T2704-a: Motor 9,5KW/13 HP motor and variable speed – frequency controlled rpm 1.000 – 12.000 tpm., incl. collission control T2711-a: Infeed fence manually controlled with digital counter, whereas position is integrated in central control linked T2712-a: CNC controlled fence positioning (left& right hand-side combined) T2714-a: CNC controlled table opening (programm integrated for tools Ø70 upto 250 mm T2715-a: Electric controlled feeder elevation-product thickness T2731-a: Table extension at infeed-outfee ...
Martin T26 tilting table spindle moulder with CNC 4-ax control Manufacturer: Martin Type: T26 CNC Year: 2002 Control: 4-ax CNC Control Control panel: eye-level Remark: Special paint Martin 75 Years Ral 7035& 6004 Motor: 7.5/9.5 kW – twin-speed motor Tilting: -45 tot + 45° Spindel diam.: ø40 mm spindel SK40 – Dornfix-quick change Spindel elevation: Electric spindel elevation 150mm (2 speed) Spindel elevation Electric-pneumatic spindel lock (Tool changing) Central greasing Rotation speed: Twin-speed 3000-6000 rpm or 4.500-9000 rpm, electronic display, electric -automatic brake Spindel pick-up: Dornfix-quick change spindel Table: Table extension, infeed and outfeed 2405mm long, frontside support 3000mm long, frontside extension 700mm Control panel: 1. CNC-controlled spindel elevation, with automatic dept and height control when spindle is tilted 2. CNC-controlled spindel tilting, with ...
MARTIN T27 FLEX tilting table spindle mouder: +/- 46º plus 2 CNC controlled axes Brand: Martin Type: T27Flex M-Nr.: V528804 Year: 2014 Specifications: Frame: Composite structure: Steel outer walls filled with a steel-concrete composite structure providing the best stability, stiffness ande high vibration absorption capabillities Weight: ca. 1.450 kg Table dimensions: 1255 x 900 x 95 mm., cast-iron Working height: 900 mm Tool opening-table: 255/205/161/106/74 mm. diam. Tools with max diam. Ø 250 mm (max. 150 mm. when tilted 45º) under table level elevation RPM: 3.000, 4.000, 5.000, 6.000, 8.000, 10.000 rpm RPM-adjustement: Frequency controlled Control panel at eye level, turning for highest operator comfort Control: PowerPC-controll industrial controll, equipped with Linux TFT Touchscreen Controll panel with 216 colours), CAN-controlled servo-motoric driven axes for highest repeatabili ...
Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM and tenon table Manufacturer: Martin Type: T26FleX M-Nr.: 2000 Year: V409217 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table ext6ension infeed side and tenontable outfide, that can also be used as table ext ...
Martin T26 tilting table spindel moulder with 2-ax control and 7.5 kW frequency controlled spindle RPM Manufacturer: Martin Type: T26 M-Nr.: 2000 Year: V415216 Control: Control at eye level: spindel-elevation, -tilting, infeed fence positioning, rpm-setting Control panel: Panel at eye-level, swivelling for operator comfort Motor: 7.5kW (10 BHP) with frequency controlled motor rpm Spindel : SK40 plus Dornfix-quick change system Tilting: Tilting from -45 to + 45° Spindle elevation: Electric spindle elevation 150 mm; quick- and slow speed Spindle elevation referencing tool 0-position Electro-pneumatic spindle fixation for safe and easy tool change Central greasing (long life greasing) Rotation speed: Frequency controlled 7.5 kW Spindel pick-up: SK40 Dornfix quick change system Table: Table length 2.40 mm, width: 700 mm front-side extendable Achs-control: 1. Digital-electric controlled spin ...
