Overview The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details Output: 16,000 - 20,000 bph Formats: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line
개요 병 세척기는 2011년 독일 크로네스(Krones)사에서 제작되었습니다. 이 제품들은 지난번까지 대형 음료 제조업체에서 운영되었으며 현재도 조립 중입니다. 기술 세부사항 용량: 20,000 bph 형식: 0.25l 및 0.75l 줄당 병 수: 22개 Siemens S7 장비 라벨 배출 회전 분무 연속 기계 스테인리스 스틸 차체 문서 소프트웨어 백업 스테인리스 펌프 전도도 측정 손가락 작업 예비 부품 병 셀 팁 병 셀 지지
개요 이 병 세척기는 2013년 독일 크로네스(Krones)사에서 제조되어 2014년에 가동되었습니다. 매년 정비를 받고 있습니다. 또한 텐사이드 가성소다 세척과 예비 부품도 여전히 구매할 수 있습니다. 디스맨틀링도 포함해서. 기술 용량: 66,000 bph 최대 병 직경 69mm 다음 포맷에 맞게 설정: 비시 0.33l 롱넥 0.33l 롱넥 0.5l NRW 0.5l 스타이니 0.33L
Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...
개요 이 충전 레벨 검사는 2019년에 독일 제조업체 크로네스(Krones)에서 제작되었습니다. 현재 이 기계는 설치되지 않았습니다. 테크니. 상세 정보: 용량: 50,000 bph 감마선 방출기를 통한 검사 크로네스 체크매트와 푸시오프 벨
Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
개요 이 세척기는 용기를 세척하고 멸균하는 역할을 하며, 2000년 독일 제조업체 크로네스(Krones)에서 제작되었습니다. 기계는 이미 분해되어 보관 중입니다. 기술 세부사항 용량: 최대 32,000개의 용기/시간 헹구는 스테이션 수: 50개 (일부 누락) 작동 방향: 반시계 방향 용기: 유리 + 플라스틱 V2A 내 젖은 부품 중앙 윤활 방대한 문서 제공 전기공압 밸브 제어 지멘스 S7 제어 전압: 400 / 230 V 주파수: 50 Hz 제어 전압: 24 V DC
Overview This packaging machine was manufactured in 2006 by the German company Krones. The machine is designed for wraparound cartons, with the blank fed from above, bottles grouped in sixes, and sealed from below with hot glue. The machine has a full stainless-steel construction, only 1,677 operating hours and is immediately available. Technical data Capacity: 30,000 bottles/h (0.33 L, 6-packs) Formats: Closed 6-packs, bottle Ø 61.5 mm, height 217 mm Formation of packs: 2×3 (six-pack wraparound) Operating hours: 1,677 Construction: Full stainless steel Glue type: Hotmelt Scope of Delivery Wraparound packer | Krones | Solidpac | 2006 Infeed conveyors for bottle supply and dividing system
Overview The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details Output: up tp 50,000 bph Last used for: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery Ejector some spare parts available some conveyors
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise bottle infeed/outfeed parallel on one side of the machine
Overview This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...
