Übersicht Die Etikettiermaschine wurde 2015 von der deutschen Firma Krones hergestellt. Sie ist noch in Betrieb und befindet sich bei einem deutschen Mineralienunternehmen. Da der Vorbesitzer in eine neue Maschine investiert, ist diese Maschine zu verkaufen. Die Maschine ist mit Greiferanläufen ausgestattet, die es erlauben, viele Formate zu verarbeiten und geringe Umrüstzeiten zu haben. Zusätzlich gibt es automatische Etikettenmagazine, um die Stillstandszeiten weiter zu reduzieren. Technische Details Leistung: bis zu 50.000 bph Bauart Rotierend Arbeitsrichtung gegen den Uhrzeigersinn (r-l) Modulare Maschine Höhe des Förderbandes: 1150 mm Etikettentyp: Kaltleim Position des Etiketts Brust/Hals Stanniol Körper Rücken Siegel Flaschenformate 0,25l Vichy-Flasche 0,5l GDB 0,7l GDB 0,75l Gastro-Flasche Anzahl der Aggregate: 3 Teilkreisdurchmesser: 1800 mm Anzahl der Flaschenteller: 45 ...
Overview This Krones Lavatec KES-2-5-312/25-110 bottle washer was manufactured in 1996 and has an output of 29,000 bottles per hour. The machine has been modernized several times, including an S7 control system, caustic filtration with drum screen and pH value measurement for hot water 1. The machine will run until the end of January 2026 and can be inspected in person at any time until then. Technical details Output: 29,000 bottles/hour Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Equipment & modernizations Plastic cell with 110 pitch Suitable for swing-top bottles Bottle diameter: 54 - 90 mm Bottle height: 180 - 340 mm Modernizations: Retrofitted S7 control system Drum screen for caustic filtration Railing on the machine Hanger-specific caustic spraying in the deflector Cleaning & heating system: Rental rotating spraying Heating with tube bundle exchanger and hot water ...
Overview This PET filler was manufactured in 1999 by Germany-based KRONES. It is suitable for filling carbonated soft drinks in PET bottles and is equipped with a Pick&Place neckhandling system. The machine is immediately available and can be inspected upon request. Technical data Capacity: 27,000 b/h at 1.0l PET 25,000 b/h at 1.5l PET 22,500 b/h at 2.0l PET Formats: 1.0l, 1.5l, 2.0l PET bottles Closure: PCO 1881, plastic screw caps Filling system: Isobaric Number of filling valves: 126 Capper: Screw capper 720-18-126 (Alcoa) Running direction: Right-Left (anti-clockwise) Neckhandling with Pick&Place-System Product: Carbonated soft drinks (8 g/l CO₂, 20°C) Machine pitch: 144 Machine safety: Full guarding – lifting version Control Unit: Siemens S7 Accessories: Krones Checkmat Scope of Delivery Krones Sensometic VP-I-PET filler Screw capper by Alcoa (720-18-126) Krones Checkmat Pi ...
概述 这款洗瓶机由德国公司Krones于2013年制造，并于2014年 入使用。每年都会进行维护。此外，十侧氢钠清洗和 备件仍可购买。包括迪斯曼特林。技术数据容量：66,0 00 bph 最大瓶径 69 毫米 适用于以下格式：维希 0.33升长颈 0.33升长颈 0.5升 NRW 0.5升 Steinie 0.33
概述 该冲洗器用于清洗和消毒容器，由德国制造商Krones于2 000年制造。机器已经被拆解并存放起来。 技术细节 容量：最高32,000个容器/小时 冲洗站数量：50个（部分缺失） 运行方向：逆时针 容器：玻璃+塑料 V2A中部分受湿 中央润滑 有详尽文档可用 电气气动阀控制 西门子S7控制 电压：400 / 230 伏 频率：50赫兹 控制电压：24伏直
Overview This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Capacity: 30,000 bottles/hour (500 bottles/min) Sleeve Applicators: 2-head sleeve feed system Shrink Tunnel: Steam-operated (Shrinkmat) Bottle Formats: 300 ml / 500 ml / 1,500 ml Condition: Very good, low operating hours Operating Hours: 1,563 Scope of Delivery Krones Sleevematic sleeve applicator 2-head sleeve feed system Shrink tunnel (steam) Bottle format parts for 300/500/1500ml PET bottles
概述 该填料由德国Krones公司于2007年制造。该机器定期维护 ，仍在组装中，随时可进行检查。技术细节 输出：40,000 bph（200 ml） 容量：200 ml 玻璃瓶 237 ml 玻璃瓶 封口：皇冠盖 流量方向：顺时针 进出口高度：1,150 mm +- 50 mm 注水点：96 封口：15 螺距圆直径：2,880 毫米 螺距：94 毫米 控制系统：西门子 S7 能耗：15.17 千
Overview The machine is designed for high-speed wrap-around labeling from the reel. The machine was taken from a production line and is fully functional. It is out of production but available for inspection. Technical data Capacity: 39,000 bottles per hour (bph) Bottle Formats: 1.5 L Worked Labels: IN REEL two label applicators Reel Change: Automated Run Time: Approx. 55,000 hours Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Working Conditions: 5-40 °C, 30-80% humidity, up to 1000 m altitude, no explosive atmosphere working direction: left-right/clockwise bottle infeed/outfeed parallel on one side of the machine
Overview The labeler was manufactured in 2004 by the German manufacturer Krones. The machine was regularly maintained and is still installed in a bottling line. As the selling mineral water company is not using the whole bottling line any more, they are selling the used machines, which are still in good shape. Tech. Details Output: 16,000 - 20,000 bph Formats: 0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l Set 1 Pitch circle: 720 mm Number of plates: 15 Number of labelling stations: 2 Rotation: counter clockwise Glue pumps included Checkmat label inspection for label presence Date coder included Stainless steel glue roller infeed and output direction in line
Overview This crater was built in 2017 from German manufacturer Krones. The machine is in a very good condition, still installed and can be viewed in person at any time. Technical Details Capacity 28,800 bottles per hour 1,200 crates per hour Recently processed parameters Bottle dimensions 500ml Outer diameter: 65,50mm Total height: 206,30mm Crates Formation 6x4 Length crate: 400mm Width crate: 300mm Height: 255mm Box inlet direction: transverse Electrcial connection: 400/ 230V, 50Hz, 15 A
Overview This fill level and closure inspection unit was manufactured in 2014 by the German company Krones AG. The Krones Checkmat 731 was used for overfill and underfill detection based on high-frequency (HF) measurement as well as closure control for metal caps via sensor technology integrated into the filler. The system was recently dismantled in full working condition after being replaced by a newer camera-based inspection system. All peripheral components such as trigger light barriers, encoder, and pusher were properly disconnected and are included in the delivery. Technical data Inspection functions: Overfill and underfill detection using HF (high-frequency) method Closure control via integrated sensor for metal caps (mounted in filler) Condition: Excellent, fully functional before dismantling Status: Dismantled and stored, ready for shipment Application: Bottling lines for beve ...
