spindle diameter: 110 mmx-travel: 2200 mmy-travel: 1600 mmz-travel: 1600 mmspindle turning speed range: 35 - 3000 U/minspindle drive motor: 18,5 / 15 kWspindle taper ISO: 50 w-axis: 500 mmtable surface area: 1250 x 1500 mmTable load: 5000 kgT-slot - width: 22 H8 B-axis (table): 0,001 °Control: FANUC 31i-B Rapid Travel X / Y / Z-Achse: 12 m/mintotal power requirement: 50 kVAweight of the machine ca.: 21,5 tdimensions of the machine ca.: 7,8 x 4,8 x 3,7 mAssembly 2018- CNC control FANUC 31i-B- Tool changer 60-fold (ISO 50)- Coolant system with IKZ 20bar- Chip conveyor- Renishaw OMP 60- Universal milling head- Angled table (2)- CEonly approx. 800h running hoursThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 125 mmx-travel: 1.500 mmy-travel: 1.250 mmz-travel: 1.000 mmw-travel: 550 mmtable surface area: 1.000 x 1.250 mmworkpiece weight: 6.000 kgquill stroke: 550 mmtool taper: ISO 50 number of spindle speeds: 5-3.700 U/min.max. torque: 2012 Nmfeed speeds: 1-6000 (x-Achse) mm/minfeed speeds: 1-6000 (y-Achse) mm/minfeed speeds: 1-6000 (z-Achse) mm/minrapid traverse x/y/z: 15/ 15/ 15 m/mindimensions of the machine ca.: 7,51 x 5,07 x 3,33 m: 63 kVAEquipment/ Accessories:- CNC control Siemens 840 D - 60 ATC- Coolant system with high-pressure pump 30 l/min.- 20 bar- documentationThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
spindle diameter: 110 mmx-travel: 2.100 mmy-travel: 1.500 mmz-travel: 1.000 mmw-travel: 500 control: HEIDENHAIN TNC 430 connected load: kVAWorking Spindle: - boring quill diameter: 110 mmspindle taper: DIN 69871 ISO 50 spindle power: 22 kWtransmission ratio: 2 turning speed range: 2.000 U/minclamping table: - max. workpiece weight: 4.000 kgsurface area: 1.100 x 1.300 mmfeeds: feed range X-, Y-, Z- axis: 0 – 10.000 mm/minfeed range W-axis: 0 - 10.000 mm/minrapid motion - x-axis: 10.000 mm/minrapid feed Y, Z, W-axis: 10.000 mm/mintotal power requirement: 22 kWweight of the machine ca.: 23.000 tdimensions of the machine ca.: 7,1 x 6,5 x 3,7 mEquipment.• CNC-control HEIDENHAIN 430• support bearing• manual milling head• coolant tank with pumpThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
스핀들 직경: 100mm x-travel: 1200mmy-travel: 800 mm 총 전력 요구 사항: kW기계 중량 약: t공간 요구 사항 약: 5.6x3.4x3.x7 m브랜드: 펨코유형: WBT-100SR2CNC 브랜드: 미쓰비시CNC 모델: Meldas C3건설 연도: 1995-05플랜 지원테이블 길이: 1,440 mm 테이블 폭: 1,600 mm 스핀들 직경: 100 mm ø기계 크기(lxbxh): 5,680 x 3,400 x 3,700 mm포함 앵글 밀링 헤드 타입 Huron 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
스핀들 직경: 105mmx-travel: 1000mmy 트래블: 1000 mm 총 전력 요구 사항: kW기계 중량 약: t공간 요구 사항 약: m브랜드: 후아리스티유형: MDR105 CNC CNC 브랜드: 하이덴하인CNC모델: TNC145 건설 연도: 1983테이블 길이: 1,000 mm 테이블 폭: 1,000 mm X: 1,000 mm Y: 1,000 mm Z/W: 1,000 mm 스핀들 콘: ISO 50스핀들 직경: 105mmø 이 광고의 데이터는 LogoTech oHG의 기계 관리 인 ModulMWS로 작성되었습니다.
