: neu : ca. 6-8 Wochen ab Auftrag : Italien : 12500 €: 240 €: 150 to: fix : 150 mm: 780 mm: 1000 mm: 1900 mm: 1200 mm: 2450 (PSS: 2600) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 150 TL: 1 speed 4 mm/s, single-hand control with lever € 12.500,00 PSS 150 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 13.500,00 PSS 150NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 14.500,00 PSS 150: same as PSS 100 NC but with stroke 500 mm € 18.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 7300 €: 140.89 €: 70 to: horizontal verschiebbar : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 M TL: 1 speed 4 mm/s, single-hand control with lever € 7.300,00 PSS 70 M L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 8.000,00 PSS 70 M NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 8.700,00 PSS 70 M: same as PSS 70 M NC but with stroke 500 mm € 9.500,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 20800 €: 399.36 €: 70 to: horizontal verschiebbar : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 1050 kgHORIZONTAL MOVABLE CYLINDER550 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 20700 €: 397.44 €: 150 to: fix : 1000 mm: 300 mm: 1020 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 8 mm: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2450 mm: 2400 kg2 guidingsbig upper tool holder and table witht-slotsupper and lower pressbrake toolmanometerrapid down move with automtic changeto working speedpiston stops in every positionmanuel and 2 hand workingTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 26500 €: 506.15 €: 100 to: horizontal verschiebbar : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1770 kgHORIZONTAL MOVABLE CYLINDER 600 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 30900 €: 590.19 €: 200 to: horizontal verschiebbar : 300 mm: 1900 mm: 320x210 mm: 5 mm/s: 20 mm/s: 2460 mm: 1600 mm: 2700 mm: 4800 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo shows mod. HDK 1570/150)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7000 €: 135.1 €: 80 to: fix : 250 mm: 1040 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1810 mm: 750 mm: 2100 mm: 835 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 6500 €: 125.45 €: 60 to: fix : 250 mm: 1040 mm: 180x120 mm: 4 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 800 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISH user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 17700 €: 339.84 €: 100 to: fix : 300 mm: 680 mm: 1520 mm: 8 mm/s: 5 mm/s: 10 mm/s: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2350 mm: 2500 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 hand controltable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 15500 €: 297.6 €: 150 to: horizontal verschiebbar : 300 mm: 750 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2560 mm: 1000 mm: 2480 mm: 2350 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60 tostroke: 400 mmdayligth: 900 mm: 825 mm: 295 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/sectotal power requirement: 4 kWweight of the machine ca.: 700 kgOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 €: 148.61 €: 80 to: horizontal verschiebbar : 250 mm: 1040 mm: 865 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 835 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 10000 €: 193 €: 100 to: horizontal verschiebbar : 300 mm: 1570 mm: 220x160 mm: 5 mm/s: 10 mm/s: 2630 mm: 1000 mm: 2430 mm: 1600 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 5500 €: 106.15 €: 30 to: fix : 775 mm: 5 mm/s: 10 mm/s: 1500 mm: 700 mm: 2015 mm: 400 kgsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 7306 : prompt, Zwischenverkauf v : Italien : 11800 €: 205.44 €: 1 : 10700 €: 50 to: horizontal verschiebbar : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 720 kg: 550 mmThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 52000 €: 982.8 €: 150 to: fix : 1250 mm: 500 mm: 700 mm: 1500 mm: 20 mm/s: 10 mm/s: 3 mm/s: 1200x700 mm: 1250x400 mm: 2400 mm: 1200 mm: 2800 mm: 5200 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 38000 €: 725.8 €: 100 to: fix : 1250 mm: 500 mm: 780 mm: 1500 mm: 25 mm/s: 10 mm/s: 4 mm/s: 1300x600 mm: 1250x400 mm: 2400 mm: 1200 mm: 2450 mm: 2450 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guardAL ...
: neu : ca. 4 Monate ab Auftragse : Italien : 70000 €: 1323 €: 300 to: fix : 500 mm: 1500 mm: 20 mm/s: 2 mm/s: 2800 mm: 1500 mm: 3200 mm: 6000 kgtable with integrated cylinder to lift the workpiececontrol by levers as well as control panel (2- hand)regulable maximum pressureManometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 16100 €: 309.12 €: 100 to: fix : 300 mm: 680 mm: 1020 mm: 8 mm/s: 5 mm/s: 10 mm/s: 500x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2350 mm: 1985 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 HAND CONTROL AND FOOT PEDALtable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 3800 €: 20 to: fix : 825 mm: 520 mm: 1150 mm: 500 mm: 1800 (PSS: 1950) mmThe table can be lifted manuallyHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 20 TL: 1 speed 4 mm/s, single-hand control with lever € 3.800,00 PSS 20 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 4.500,00 PSS 20 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 5.100,00 PSS 20: same as PSS 20 NC but with stroke 500 mm € 5.200,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 7321 : prompt, Zwischenverkauf v : Türkei : 12500 €: 216.96 €: 1 : 11300 €: 150 to: horizontal verschiebbar : 300 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2630 mm: 1000 mm: 2480 mm: 2100 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 18200 €: 349.44 €: 100 to: fix : 1500 mm: 300 mm: 1520 mm: 680 mm: 10 mm/s: 5 mm/s: 6 mm: 500x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2275 mm: 2500 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand operating panelTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 €: 658.95 €: 100 to: fix : 835 mm: 500 mm: 780 mm: 1050 mm: 25 mm/s: 10 mm/s: 4 mm/s: 800 x 600 mm: 700 x 350 mm: 1800 mm: 1000 mm: 2400 mm: 2050 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guard ...
: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 11000 €: 211.2 €: 50 to: fix : 350 mm: 900 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1700 mm: 700 mm: 2100 mm: 650 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...
pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력 : 75 t스트로크 : 250 mm일광 세로 / 옆 : 800 x 215 mm낮 길이 : 170 - 885 mm작동 압력 : 7,5 - 8.5 bar기계 무게 ca : 0,45 t크기 : 1,2 x 0,8 x 2,1 mm유압 / 공압 작업장 프레스실린더는 옆으로움직일 수 있습니다 공압 풋 페달테이블 높이 조정을위한 윈치 2 개 프레스 블록CE 마
pressure: 60 tstroke: 400 mmtable surface area: 800 x 500 mmfeed down: 4,03 mm/secfeed up: 5,82 mm/seccolumn daylight: 820 mmoil pressure max. in the work cylinder: 400 baroil volume: 26 lvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• Pressure cylinder moveable horizontally,• Working table hydraulical adjustable,• Cylinder Ø 150 mm, piston base Ø 85 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
압력 : 25 t 스트로크 : mm 테이블 표면적 : mm 총 전력 요구 사항 : 기계의 kW중량 ca.: 기계의 t치수 : m브랜드 : WP용량 : 25 T컬럼 사이의 거리 : 760 mm 실린더와 테이블 사이의 거리 : 950 mm
