마그네틱 드릴링 머신 (10)

사양: - 드릴링 용량 약. 32 밀리미터 - 드릴링 스핀들 홀더 MK 3 - 프로젝션 70 mm - 허브 약. 175 밀리미터 - 약 8 속도. 10 - 420 분당 회전수 - 드라이브 42 V / 960 와트 - 마그네틱 베이스 100 x 220 mm - 마그네틱 베이스 왼쪽 + 오른쪽 회전 드릴 캐리어 - 대략적인 공간 요구 사항. W 300 x H 700 x 안길이 460 mm - 대략 무게. 49 킬로그램 - 안전 변압기 - FEIN을 만든 절연 변압기, 유형 ESB 1000 - 일차 전류 220V - 이차 전류 42V - 대략적인 공간 요구 사항. W 300 x H 350 x 안길이 350 mm - 무게 27 kg

Dimensions 600x500x250 mm Auction-ID: A1-46480-3060

Dimensions 470x360x180 mm Auction-ID: A1-46480-3061

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-45902-309

equipped with automatic cooling system; unused; in suitcase; 5637 Auction-ID: A1-45902-308

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1445 €: 19 mm Weldon : 1 kW: 307 mm: 221 mm: 317 mm: 135 kg: 36 mm: 51 mm: 70 mm: 350 U/min: 6 mmNew PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and givesadditional safety and diagnostic information.Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode.The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speedand the range of allowable cutting parameters for a given tool type and hole diameter.It results in extending tool life of both HSS and TCT cutters and enhanced machine performance.Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green)are possible in manual mode only.A safety strap protects ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 2595 €: 12 mm: 19 mm Weldon : 0.4 kW: 361 mm: 238 mm: 352 mm: 145 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThis special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operatein remote areas, where no power supply is available.The base includes very strong neodymium magnets and does not require any electricity to operate.PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicatethe current status of the drill and provide safety information.The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials.Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ahbattery pack.Features and benefits:• LED interface flashes green wheninadequate adh ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 995 €: 23 mm: 19 mm Weldon : 1.15 kW: 331 mm: 254 mm: 456 mm: 155 kg: 23 mm: 50 mm: 50 mm: 160 mm: 240 / 480 U/min: 6 mmPRO-50 featuring purpose designed motor and 2-speed gear box 240/480 rpm is optimized to provide appropriate speed forwork with HSS cutters up to ? 45 mm and twist drills up to ? 23 mm. Rigid construction, optimized by means of FEA(finite element analysis) software extends tool life and enables depth of cut up to 75 mm.Compact design along with innovative smart magnet with reduced weight make it a lightweight machine.PRO-50 provides maximum holding power on thin materials thanks to Magnetic Field Shape Control (MFSC). The drill protectsboth the machine and the operator from work on too thin work piece by means of Magnetic Power Adhesion Control (MPAC).PRO-50 is also equipped with Energy Saving Base (ESB) that uses only 50% o ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1695 €: 12 mm: 19 mm Weldon : 0.45 kW: 316 mm: 235 mm: 328 mm: 115 kg: 12 mm: 36 mm: 50 mm: 70 mm: 260 U/min: 6 mmThe PRO-36 Battery is a drilling machine designed to drill holes of diameters up to 36 mm (1 7/16”) by using annular cutters.The machine can also drill holes of diameters up to 12 mm (0.47”) by using twist drill bits.Cordless drill is equipped with LED monitoring system that generates signals in green and red colours to indicate currentcondition of the drill and give safety information.Control panel is equipped with so called „vandal resistant” illuminated start/stop switches (green/red)Features and benefits:• LED Monitoring System indicates current condition of the drill and gives safety information• LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece• dual bars guide  ...

: neu : ca. 2 - 4 Wochen ab Auftr : Polen : 1995 €: 25 mm: 19 mm Weldon : 1.6 kW: M20 : 266 mm: 259 mm: 505 mm: 18 kg: 25 mm: 70 mm: 75 mm: 190 mm: 120-190 / 290-450 U/min: 8 mmThe PRO-72T drilling machine is suitable for hole cutting and tapping applications.Powerful variable speed motor enables milling capacity up to 70 mm (2-3/4”) and drilling capacity up to 25 mm (1”).Machine’s forward &, reverse work modes allow thread cutting up to M20 with Promotech’s new tapping system.Two speed gearbox with continuous speed adjustment allows to set the optimal speed depending on diameter, steelgrade or tool type.Intelligent speed control system maintains constant motor speed regardless of changing loads.Innovative 360-degree LED indicator facilitates proper machine operation and increases work safety.Features and benefits:• powerful motor with heavy duty 2-speed gearbox• Electro ...