기타 연삭기 (45)

기어 연삭기 HURTH SRS 400

Auction-ID: A1-45170-97

변속 가능한 나사산 연삭기 WMW 5822M.

Auction-ID: A1-45170-93

벨트 연삭 부착물이 있는 샤프트 연삭기 사양: - 플렉시블 샤프트 1500 mm - 5단계 속도 - 벨트 연삭 부착물 - 드라이브 380 V - 이동식 하부프레임 - 공간 요구 사항 약. W 600 x H 1400 x D 600 mm - 무게 약. 80 킬로그램

Technical data Manufacturer: JUNG Model No.: JF 520E-1 Machine Type: Surface Grinding Machine Grinding length: 600 mm Grinding width: 200 mm Table size: 600 x 200 mm Distance from spindle table: 500 mm Grinding wheel: 250 x 25 x 51 mm Max. circumferential speed: 35 m/s Longitudinal feed: 1 – 24 m/min Transverse feed: 0.1 – 8.0 mm Spindle speed: 800 – 4200 rpm Spindle power: up to 5 kW Voltage: 380 V Frequency: 50 Hz Weight: approx. 1500 kg Configuration Hydraulic table feed Automatic transverse feed Fine-tuning Central lubrication Electromagnetic clamping plate (24 V prepared) Various grinding spindle designs Auction-ID: A1-46315-10

Auction-ID: A1-45170-81

Manufacturing number: 75-8771Max. grinding wheel diameter: approx. 250 mmMax. sanding belt width: approx. 40 mm Auction-ID: A7-46287-11

Grinding wheel diameter: approx. 60 mm Auction-ID: A7-46287-94

incl. high-frequency sander from the manufacturer COOPER, type: BL-2B, year of manufacture: 2006 Auction-ID: A7-46287-135

Rösler Vibratory Grinding Machine incl. Belt Dryer Small, Vibrator Dimensions: Drying plant: H:900 W:900 L:1100 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-46048-116

Table load incl. magnetic clamping plate 600 kg, table speed 2-28 m/min, max. grinding range 600x450 mm, incl. cooling unit Auction-ID: A1-46045-112

Rösler mass finishing machine incl. belt dryer, vibrator Dimensions: Drying plant: H:1900 W:1800 L:3000 Vibrator: H:1500 B:1800 L:1800 Mounter: H:1700 W:1300 L:2100 Auction-ID: A7-46048-110

Auction-ID: A1-46045-118

TOOL/CUTTER GRINDING MACHINE Inv. No. 12.993I1 Make PEETERS Model AP Distance between centers 500 mm Height of centers 120 mm Table movement 400 mm 4 spindle speeds 2900 – 5800 RPM Table length 840 mm Table width 140 mm Weigth 890 kg Auction-ID: A1-45737-125

TOOL/DRILL GRINDING MACHINE Inv. No. 13.031IM Make FARMAN Model FC 50N Mach.no. 6048 X axis (Left / Right) stroke 240 mm Y axis (Front / Back) stroke 180 mm Z axis (Up / Down) 110 mm Swiveling Shaft (angle) 0 - 20° Drill Size ø2 - ø51 mm Point Angle 40° - 180° Clearance Angle 0° - 18° HP 0.5 Volts 380 Cycles 50 Auction-ID: A1-45737-130

Auction-ID: A1-45737-144

Auction-ID: A7-45983-77

max tube length: 2500 mm; max diameter: 60 mm; Double-sided pipe deburring Auction-ID: A1-45793-37

Grinding length max. 70 mm, clamping diameter max. in the hood 165 mm, headstock bore 28 mm, speed of the headstock spindle 500-750-1000 rpm Auction-ID: A7-45768-40

Drill Bit Grinding Machine: Additional station for grinding back the drill cutting surface (clearance angle) 25tk. Collets ER 40 are included in the scope of delivery, these are also suitable for clamping intermediate sizes. For grinding twist drills made of HSS and Tungsten carbides with a TiN layer of 8 - 32 mm. Rotor with precision ball bearings guarantees smooth running. Vibration-free running due to high weight and rubber feet. Sharpening angle adjustable for all common twist drills. Packaging Dimensions: 430 x 240 x 240mm. Weight 16Kg. Grinding range 8 - 32 mm Sharpening angle min./max. 90 - 140 degrees Connection voltage 230 V Condition: never used / new (5) Auction-ID: A7-45761-841

Auction-ID: A7-45768-15

Drill Bit Grinding Machine Grinding range 2 - 20 mm Acute angle min./max. 90 - 135 degrees Connected load 230 V Machine weight approx. 8.6 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A7-45761-853

Flexible shaft Speed max 2900rpm Connection SP 400Volt Power 0.8KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-778

Auction-ID: A7-45768-115

This grinder is ideal for regrinding tools such as face mills, drills, TIG welding needles and much more. comes standard with: Accessories for lathe tools Accessories for drills Accessories for milling 5C Spring Collet (4-6-8-10-12 mm) Clutch wrench 38-42 Grinding wheel wrench Allen key M3-M8 Screwdriver Diamond grinding wheel Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond Pen Spring Collet: 3/16\" - 5/16\" - 3/8\" - 1/2\" Grinding range 3 -28 mm Angle adjustable from - to horizontal 0-180 degrees Angle adjustable from - to vertical 0-45 degrees Angle adjustable from - to negative 0-52 degrees Clamping range 3 - 28mm mm Speed 5200 rpm Connected load 230 / 250 volts / watt Disc diameter 100 x 50 x 20 mm Machine weight approx. 45 kg Dimensions L x W x H 0.5 x 0.4 x 0.4 m Condition: never used / new (5) Auction-ID: A7-45761-834

Satin finishing machine with accessories. See pictures Connection voltage 230 V Power 1.2 KW Mounting diameter 19mm mm Speed 1000 - 3000 rpm Roller width max. 100 mm Roller length max. 120 mm Weight 2.8 kg Condition: never used / new (5) Auction-ID: A7-45761-886

ELB SW3T Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3T X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. machine weight: 1500 kg Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-28

Tube grinding/satin finishing machine - For sanding, satin finishing, and high-gloss polishing - Large wrapping angle of 270° for efficient work - Belt speed infinitely adjustable - Flexible and handy - perfect for railing construction Connection voltage 230Volt Power 800W Tape dimension 40 x 760mm For pipe diameters up to 180mm Condition: never used / new (5) Auction-ID: A1-45681-874

Grinding range 2 - 13 mm Sharpening angle min./max. 90 - 140 degrees Connected load 230 V Machine weight approx. 10 kg Space requirement approx. 0.35 x 0.2 x 0.2 m Condition: never used / new (5) Auction-ID: A1-45681-850

Belt width 150 mm Strap length 1220 mm Grinding wheel dimension 225 mm Work table: 150 x 400 mm Table adjustable up to 90 degrees Table surface 150 x 130 mm Connection voltage 230 V Total power requirement 0.75 kW Machine weight approx. 35 kg Space requirement approx. 650 x 360 x 400 mm Condition: never used / new (5) Auction-ID: A1-45681-887

Belt width 100 mm Strap length 915 mm Grinding wheel dimensions 100 x 915 mm Work table: 225 x 155 mm Total power requirement 0.44 kW Machine weight approx. 0.018 t Space requirement approx. 0.56 x 0.26 x 0.3 m Condition: never used / new (5) Auction-ID: A1-45681-852

ELB SW3HA Flat Grinding Machine Type: Flat grinding machine Manufacturer: ELB Model: SW3HA X-axis travel: 600 mm Y-axis travel: 200 mm Z-axis travel: 350 mm Approx. dimensions (L x W x H): 1150 x 1150 x 1800 mm Functionality not tested This item is delivered loaded on truck. Dismantling and loading costs are specified as additional costs. Auction-ID: A1-45225-26

Stone and belt grinding machine Motor power 900 watts. Speed 2950 rpm. Dimensions whetstone 200 x 32 x 30mm. Dimensions sanding belt 100 x 915 mm. Package sizes 62 x 54 x 30 cm. Weight 35 kg. Condition: never used / new (5) Auction-ID: A1-45681-774

Belt and disc grinding machine Belt width 25 mm Strap length 762 mm Grinding wheel dimension 125 mm Table adjustable up to 45 degrees Table surface 130 x 130 mm Connection voltage 230 V Total power requirement 0.3 kW Condition: never used / new (5) Auction-ID: A1-45681-859

Auction-ID: A7-46309-32

Rösler mass finishing machine incl. belt dryer, vibrator & placement system Auction-ID: A7-46048-95

Frequency 60 Hz, dimensions continuous grinding machine 2500x1450x2700 mm, dimensions control cabinet 1650x650x2100 mm Auction-ID: A1-46045-257

제어  SIEMENS 840 D SL 마이크로피니싱 머신 타입 Microstar 284 수직 설계, 8개의 워크피스 홀더와 4개의 마이크로피니싱 유닛(슬라이드 및 카운터 링 연삭을 위한 가공 장치)을 CNC 제어합니다. - 6500 호어스, 작업물 스핀들: 8개, 최대 속도 2000rpm, 마감 유닛 수 4개, 최대 4개. 속도 10,000 rpm 최대 작업물 길이 160 mm적재 높이 1200 mm

CONTROLS  CNC controls SIEMENS 840 D SL ELECTRICAL SPECIFICATIONS  mains voltage: 400 V  mains frequency: 50 HzDIMENSIONS / WEIGHTS  total weight approx.: 5200 kgMicrofinishing machine type Microstar 284 in vertical design with 8 workpiece holders and 4 microfinishing units for machining slide and counter ring grinding.-11000 houersWorkpiece spindles: 8 piecesSpeed max 2000 rpmNumber of finishing units 4 piecesmax. speed 10'000 rpmmax workpiece length 160 mmLoading height 1200 mm

제어  전자 제어 전기 사양  전원 전압: 400 V  전원 주파수: 50 Hz

크기: 410 x 410 x 860 m, 전기 캐비닛이 장착된 뮐러 스윙암 연삭기용 베이스 유닛. 내부에는 모터 보호 스위치, 퓨즈, 16A 소켓 등이 있습니다. 전기 부품은 사진 번호 2에 나와 있습니다. 구매자의 요청으로 기본 유닛 없이 연삭기가 판매되었습니다. 기본 치수는 300 x 300 mm입니다. 개조를 거치면 기본 유닛은 비슷한 크기의 기계에도 사용할 수 있습니다. 이 광고의 데이터는 LogoTech oHG의 소프트웨어 솔루션인 ModulMWS로 제작되었습니다.

Suitable for automatic cutting and surface grinding of carbide and HSS rods with high precision for standard and special solutions. Accessories: Total enclosure, Automatic feed (hydro-pneumatic), Rapid traverse adjustable via touch panel, Automatic fire extinguishing system Kraft & Bauer FB 703, Freely programmable length positioning, Siemens Simatic HMI control system, Prepared for connection to a central coolant system., Weight approx: 1700 kg, Dimensions W x D x H: 1900 x 1200 x 2400 mm, Cutting disc diameter: Max. 200 mm, Drive power grinding motor: 4,0 kW, Workpiece length without loader magazines: 3 - 450 mm, Workpiece diameter without loading magazine: 3 - 32 mm, Workpiece length with loader magazine: 1-310 mm, Workpiece diameter with loading magazine: from 3 - 20 mm

범용 공구 및 절삭 연삭기 TACCHELLA 4 AM - 범용 장치, 테이블의 유압 이동., 기술 데이터에 대한 정보는 구속력이 없습니다., 사전 판매에 따라 기계 사용 가능., 세로 이동 x축: 400mm, 교차 이동 y축: 250mm, 작업대와 스핀들 축 사이의 간격: 375mm, 휠 속도: 3000/6000rpm, 휠 치수: 200x20mm, 스핀들 모터 출력: 1,5Kw, 무게: 1150kg, 액세서리: 냉각 시스템, 전동 분할 장�