Working width: 120 mm
Working height: 1200 mm
: 6000
mm
Number of cylinders: 12 St.
1 pc. LAMINATION PRESS Type SLV
- H - 6.0 - 1.2 - 120 - 6V - II
-P
--------------------------------------------------------
Technical
specifications
---------------------------------------------------
-----
working dimensions:
Length: 6000mm
Height:
1200mm
Gluing thickness: 20 - 120 mm
Number of pressure
cylinders: 12 pcs.
Cylinder type: Ø 63 x 120 mm
Max. force
per pressure cylinder: 50 kN
Specific pressure: 7.5
kg/cm2
Number of hold-down devices: 6 pcs.
Cylinder type: Ø
40 x 100 mm
Max. force per hold-down device: 20 kN
Number of
sections: 2
Max. pressure: 160 bar
Power: 3.0kW
Pump flow:
10L/min
Manual control with hydraulic valves
every work
surface in contact with glue is covered with INOX
Materila
covered
each pressure cylinder and the hold-down
device can be locked separately
equal pressure in each
section
The press can be extended in the future
Parking space
for 2 x 3 hold-down devices
Italian
hydraulics
-------------------------------------------------------
-
Price in this equipment on
request!
--------------------------------------------------------<
br/>Option: German hydraulics surcharge 2,300.00 euros
Other
options on request!
Description of basic
machine:
--------------------------------------------------------<
br/>The gluing stand type SLV - H - 120 - 6.0 - 1.2 is for gluing the
profiles in
of various shapes (window scantlings, supporting
profiles, etc.).
The largest dimensions of the glued piece are
6000 x 1200 x 120 mm.
The compression is carried out by hydraulic
cylinders with a diameter of 63 mm
and a stroke of 120
mm,
which exert a force of 50 kN per unit at a pressure of 160
bar.
There are 12 hydraulic cylinders on the gluing
stand,
which generate the total force of 600 kN. The gluing stands
with the pressure G51212123
cylinders
are adjustable in
width (left and right).
(Pressure cylinder height-adjustable from
650 to 1200 mm - is available as an
OPTION).
The lower stops
are fixed and are in one piece.
The workpiece to be pressed is
through
6 alignment units aligned with a hydraulic
cylinder.
The hydraulic cylinders have a diameter of 40 mm and a
stroke of 120 mm
and they exert the force of 20 kN per unit at a
pressure of 160 bar.
The hydraulics are operated by means of
the
manually controlled valves, when the valve lever is in
the
position compression is reached after reaching the
set
Pressure interrupts the pressing
(Technical
data according to the manufacturer - without
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech oHG.
독일
ab Standort 
