SCHMALZ VacuMaster Multi Vakuumheber 운송 시스템

working length: mm
Working width: mm
Working height: mm
Schmalz VacuMaster Multi vacuum device 00 / 150-90 ° -1
************************************************** *****************
Pos. 1 - Article 12.01.02.10520
------------------------------------------
with chain and Slewing Crane
For handling porous large-sized workpieces.
VM-MULTI-400/150 H / 90-1EG1000x675
Load 400/150 kg
Design: horizontal pivot 90 °
Height: 540 mm
Control Arm Length: 1025 mm
Eye diameter: 5 mm
Sauggreiferanzahl: 1
Suction width: 675 mm
Suction length: 1000 mm
Motor power: 1.5 KW
Voltage (50 Hz): 230 / 400V AC3
Voltage (60 Hz): 230/460 V-Drehstom
Colour: RAL 7035 light gray
Vacuum Lifting Device VacuMaster Multi
-------------------------------------------------- -
Type VcuMaster Multi 400 / 150-90 ° -1
for the transport of plates with a porous
but also with a dense surface such as
raw and laminated chipboard
raw and laminated MDF / OSB board,
Plastic, plasterboard ......
consisting of:
Spur gear motor with brake
electrical 90 ° swings, the workpieces
powerful blower unit
2 silencers
extended run time for more
Operational reliability during power failure.
Special Reversierautomat for reversing
Blower airflow from sucking on bubbles
for easy withdrawal of the plates,
electric reversing control handily
mounted on the operating lever,
Motor protection switch with overcurrent release
Vacuum gauge D = 63 mm with
Danger zone display red / green,
electric warning device (acoustic)
maximum security
---------------------------------------
Base price Pos. 1 on request
Other post ion with more prices:

Pos. 2 - Article 14.04.01.00358 Electric Chain Hoist
-------------------------------------------------- -----------------
SCH-500-3000-8 / 2-400V-AC3 / 50
Carrying capacity: 500 kg
Stroke: 3000 mm
Lifting speed (max): 8 m / min.
Lifting speed (min) 2m / min.
Max Power: 0.72 KW
Voltage U1: 400V - AC3
Frequency: 50 Hz
with: pendant control
Type: SCH-500
Length control line: 4.5 m
FEM / ISO Classification: 1 Bm / M3
Weight: 26 kg
Pos. 3 - Article 14.04.01.99998
-----------------------------------------
Hoist load reduction
to load 350 kg

Pos. 4 - Article 14.02.08.00338
------------------------------------------
Post mounted jib crane for hoist
SK-K / G-350-5000-SRA 140-2600-EL
Carrying capacity: 350 kg
Overall height: 3385 mm
Bottom boom: 2600 mm
Boom length. 5000 mm
Dimensions of base plate: 860 mm
Rail Type: SRA 140
Tilt angle: 270 °
Power: Electric
Classification: DIN 15018: H2 B2
Paint: RAL 7035 light gray
Aluminum jibs significant ergonomic
by perfect smooth running, low
ACCELERATION and silent operation
Crane suitable for anchors
Quick and easy mountability
Secure energy supply by internal
Cable and integrable switch
Required ceiling height for standing
to the column: height + 150 mm
In conjunction with an assembly by
Schmalz or an authorized
Service Partner is an initial safety check
gem. BGV D6 and BGG 905
performed. For independent installation of
Crane system, the operator must itself for
Implementation of safety testing acc.
BGV D 6 and BGG ensure 905th
Along with:
Pos. 5 - Article 21.01.03.00159
------------------------------------------
main switch
HAUP-SADDLE 25 0A ON
Color: Red Yellow
Mounting:
Rated current 25.0 A
And
Item 6 - Article 20.14.08.00043
-----------------------------------------
Dowel set Xings
with mortar cartridge and socket
DUE SET 8yDYN-M12x25
Quantity: 8
Thread: M12
for bore: 14 mm
Concrete thickness (min.): 200 mm
Concrete Type: C20 / 25
Panel Thickness (min): 8 mm
Plate thickness (max.): 25 mm
Admission: dyn. demand
Tested: yes
Fast commissioning of the column crane after assembly
No foundation excavation required.
It must the minimum requirement of concrete thickness
(Min. C20 / 25) and concrete thickness (min. 200 mm)
be fulfilled!
(Techn. Details according to manufacturer - without guarantee.!)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.