Belt washing system Rösler C20.30/0.6/B/SOP/P/SOP,, Year of
manufacture: 2016, Serial No.: 72441,, Stainless steel, for container
dimensions 400 x 600 mm, consists of the following work zones:,
washing 1, blow off 1, washing 2, blow-off 2, Cooling with ambient
air, The workpieces pass through the washing zones of the system
continuously on a chain conveyor system., The drive is via a gear
motor with speed control., The surface of the workpieces is first
sprayed and cleaned on all sides using nozzles., The workpiece
carriers then pass through the blow-off zone, where the workpieces are
blown off with filtered ambient air via special nozzles., Analogously,
the workpieces pass through another washing and blow-off zone (washing
2 + blow-off 2), To ensure the cleanliness of the workpieces and the
washing liquid, each washing zone is equipped with a filter system.,
To improve washing and drying efficiency, the cleaning baths are
heated by electric heating elements installed on the sides of the
circulation tanks., The parts then pass through a cooling zone in
which they are blown with filtered ambient air and thus cooled., -duty
cycle-, Working zones | Time sec. | Temperature °C | Length in mm,
Loaded: 500mm, Inlet: 40 sec | 400mm, Wash 1: 60 sec | 50 °C | 500mm,
Dripping + blowing off: 60 sec | Ambient air | 600mm, Wash 2: 60 sec |
50 °C | 600mm, Dripping + blowing off: 60 sec | Ambient air | 400mm,
Cooling via fan: 60 sec | Ambient air | 600mm, Unloading: 500mm, Total
length (center distance of chain pulleys): 4400 mm, -Pumps-, Zone |
Delivery rate | Pressure | Performance, Washing 1: 150 l/min | 5 bar |
3 kW, Washing 2: 150 l/min | 5 bar | 3 kW, -circulation tank-, Zone |
Volume, Washing 1: 400 l, Washing 2: 400 l, -filtration-, 1 coarse
filter in the suction line of each pump to prevent the ingress of
foreign bodies, 2 basket filters 500 μm on the return line in each
container, 1 piece. Bag filter 50 μm after the pump for washing 1, 1
piece bag filter 50 μm after the pump for washing 2, -Heating
(designed for a heating time of 1.5 hours)-, Washing 1: Heating by
H6162917 means of electric heating elements on the side of the
circulation tank; total output: 18 kW, Washing 2: Heating by means of
electric heating elements on the side of the circulation tank; total
output: 18 kW, -transport system-, The transport system consists of 2
parallel transport chains that run continuously. The chains are driven
by a gear motor with speed control., - Power: 0.35 kW, - Nominal
speed: 0.6 m/min, switching device, - Free-standing control cabinet
with all operating and display elements with Siemens PLC type S7-1200
and KTP 700 operator panel for entering and monitoring all process
parameters., - Automatic preheating of the washing bath possible via
the PLC control, - Flashing light and horn for general disturbance, -
Air conditioning unit for cooling the switching device (designed for
ambient temperatures of max. 40°C), - Operating voltage: 400 V, 50,
Construction year: 2016
독일
bellenberg 
