HOSOKAWA에서 제작한 316 스테인리스 스틸 마이크로나이저 밀. MICRON PROCES MS20 모델. 재료 스테인리스 스틸 316/316L 기술적 특징 모델 마이크론 프로세스 MS20 문서 문서화는 없습니다 현황 당신 주에서는 제조사 호소카와  ...

• 추가 정보

사용 된 챔버 필터 프레스 / 필터 프레스 Rittershaus & Blecher / R & B 500 x 500 사이드 스파 가이드 격판덮개 크기: 500x500mm 케이크 두께: 25 mm 유용한 길이: 2200 mm 챔버의 수 : 47 조각 필터 압력: 15 바 폐쇄 압력: 최소 220 bar / 최대 260 bar 케이크 부피 합계: 약 3.9 m³ 총 필터 면적: 약 17.4 m² 절차: 폐쇄 격판덮개 물자: PP 격판덮개 수송: 수동 필터 천: 선택 사항 펌프: 선택적인 아벨 격막 펌�

강철 가위 강화 둥근 철 가위 제조업체 Muhr and Bender(제조업체 Muhr and Bender) 유형 50N/22 및 50N/28 450N/mm²에서 50N/22 컷: 라운드 : 22mm 정사각형 22mm 플랫 : 35x10mm 450N/mm²에서 50N/28 컷: 라운드 : 28mm 정사각형 24mm 플랫 : 40x15mm 새로운 기계와 ovp 모두 특별 가�

 ...

• 추가 정보

장식 유지 카드 TMCC ...

• 추가 정보

Press force max.:: 1.000 kN heating plates:: 500 x 500 mm electrically heated:: °C heating power:: kW piston stroke:: ca. 500 mm no. of stages:: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.  ...

• 추가 정보

Data sheet of retrofit POS. GE 11.70 Gebhardt 5.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Belt length: 900 mm Length of main conveyor: 5,549 mm (incl. upper bow piece) Length upper bow piece: 613 mm Total width: 610 mm Belt width: 500 mm Belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 650 mm H 2 above 2,300 mm Difference in altitude: + 1,650 mm, trail/slope 19° or 34% Support: Please ask without support, if needed Use: in the on - and backward operation, any oth ...

Gebhardt Belt conveyor system 5549-610-500 with pre-flow belt 900-610-500 RA1005 The belt conveyor system from Gebhardt is from 2007 and is in a very good (used) condition. It has an engine of the brand SEW. The system can be used in up-and-down operation. Inclination angles are adjustable as desired, upper arc and supports can be adjusted. Columns are not included in the scope of delivery. These are optionally available. Consisting of: 1 x pre-flowstrip, 1 x main band, 1 x sheet piece Technical data: Manufacturer: Gebhardt Type: 300.10 Position: GE 12.20 Built: 2007 Condition: very good (used) Engine: fully functional Length main band: 5549 mm (incl. top bow) Nominal/outer width (NB): ...

Data sheet of retrofit POS. GE 22.10 Gebhardt 7.5 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7.449 mm (incl. upper bow piece + straight piece) Upper bow piece length: 392 mm Upper straight piece length: 3,830 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 1700 mm H 2 above 2,800 mm Difference in altitude: + 1.100 mm, trail/slope 19° or 34% Support: ask without s ...

Data sheet of retrofit POS. GE 12.05 Gebhardt 7.7 + 0.9-610-500 belt conveyors Type: Gebhardt 300.10 with aluminium \skeleton\ Year of manufacture: 2007 Ribbon length: 900 mm Total length of main band: 7,733 mm (incl. upper bow piece + straight piece) Upper bow piece length: 375 mm Upper straight piece length: 1,293 mm Total width: 610 mm Belt width: 500 mm Ribbon belt type: smooth Main conveyor belt type: easy structured Drive unit: Central drive with tensioner Drive: SEW-eurodrive gear motor Conveyor speed: approx. 0.3 m/sec (= ca. 18 m / min) OK belt height: H 1 + 2,300 mm H 2 above 4,320 mm Difference in altitude: + 2,020 mm, trail/slope 19° or 34% Support: ask without  ...