Finger jointing line
The plant is from 2011 and the machines have been delivered NEW by
HOWIAL.
The Cook Bolinder is a used, old but very robust machine. Some
electrical
devices have been replaced.
Item Description
01 HOWIAL - Dump unstacking SH/4t
for lifting the raw wood pile to the required working height
working height and semiautomatic separation of the wood
of the wood stack.
Both battened and unbattened stacks can be separated.
can be separated. With inclination possibility for tilting the stack
of wood
up to 45°.
Tilting and lifting of the stack by electric motor drive.
drive. stack dimensions max. 1,75 x 1,75 x 6,00 m
max. stacking load 4 t
shortest lumber length 2,5 m
02 HOWIAL - lamella separation VE 1
for layer separation between tilt destacking and
and roller conveyor to the crosscut saw.
With pneumatically controlled tongues, on which the material is
marked for defects and then
and then deposited on the roller conveyor below.
the roller conveyor below.
03 HOWIAL - Assessment roller conveyor RO-1
digital wood moisture measuring, control and recording system for
the
automatic recording and control of the wood moisture in the
measuring method according to the electrical resistance principle
working, plant in large switch cabinet complete with
Ink jet printer, measuring amplifier, electrode stand,
measuring electrode and measuring cable 1.5 m Control cabinet
dimensions: W 600
x D 515 x H 478 mm
04 Moisture meter Gann DMT-8
digital wood moisture measuring, controlling and recording unit for
the
automatic recording and control of the wood moisture in the
measuring method according to the electrical resistance principle
working, plant in large switch cabinet complete with
Ink jet printer, measuring amplifier, electrode stand,
measuring electrode and measuring cable 1.5 m Control cabinet
dimensions: W 600
x D 515 x H 478 mm
05 HOWIAL crosscut saw AS-30 B
pneumatic controlled under table cross cut saw, with 2
automatic feed units for transporting and
positioning of the workpieces for automatic crosscutting.
Control of the saw by special photocell for the detection of
fluorescent line markings. Automatic
waste detection possible. Saw motor power 7,5 kW
saw blade diameter 700 mm
feed drive approx. 2 x 1,5 kW
air pressure 8 bar
feed speed max. approx. 60 m/min.
06 HOWIAL - conveyor belt for waste transport
of the cut waste, with nubbed belt and guide plates
belt width 350 mm
belt length 2000 mm long
belt speed 0,4 m/sec.
07 HOWIAL - double roller conveyor RO-2, 6 m long
including cross transport and feeding of the finger jointing
Drive via round belt, all rollers driven.
driven. Cross transport by chain conveyor. Ejection ±
moisture to the right Transport speed adjustable 100
m/min.
length of the roller conveyor approx. 6,00 m
width of rolls approx. 400 mm
diameter of rolls 112 mm
08-11 Compact finger jointing machine make Cook Bolinder
The technical data are original from Cook Bolinder:
Wood width from 75 to 245 mm
Timber thickness from 20 to 100 mm Input lengths from 1m to 6 m
Cross sections from 30 cm² to 200 cm² Pressing force from 5 to 22
to Spindle diameter 50 mm
tine profile 15/15
spindle speed approx. 6000 upm
Total electrical U51258834 connected load approx. 62 kW
Machine weight approx. 9 to.
Gluing OEST comb system for PU
Modern Telemechanique SPS control. In good condition with
various accessories and frequency control as new.
08A Finger jointing cutter 1 set infeed / outfeed
For both shafts HSS, ZL 15/15 Leitz
cutting width 260 mm (20 pieces)
12 HOWIAL - Roller conveyor with destacking system
Driven roller conveyor with automatic ejector and
hydraulically driven destacking arms.
Technical data:
Working height: 920 mm
Length of roller conveyor approx. 12,000 mm
14 HOWIAL - Safety technology
consisting of safety fence incl. circuit breaker for the
complete finger jointing line.
15 Finger joint - bending testing machine BSPLT-100
Testing machine for finger joint bending test according to DIN
1052-
1/A1 and EN 385
Support distances freely adjustable according to attached dimension
scale,
automatic calculation of the support distances in the software.
Fully automatic test procedure by mouse click
on the PC (PC not included in delivery). Alternatively the
can also be carried out by key operation on the front panel.
front panel.
Connection of any commercially available PC or laptop (Windows
2000/XP) via the supplied RS232 serial cable.
Pressure load cell PCE-HFG Series 0...25000 N
Plus spare parts and various accessories and possibly a
instruction and help with commissioning
Find more here - /
