금속 작업 기계 / 밀링 머신 / 라운드 테이블 밀링 머신
생산자: DMG MORI
모델:DMU 65 monoBLOCK
기계의 유형: 라운드 테이블 밀링 머신
품목 아니오.: 170270957
양: 1
날짜: 02.10.2026
위치:
독일
값:
Seller-item-No.:011245
| General | |
| Universal Machining Centre in monoBLOCK construction; Control: CELOS X with Siemens SINUMERIK ONE | |
| Technical Data | |
| Feed rate longitudinal/transverse/vertical | 40000/40000/40000 mm/min |
| Rapid traverse longitudinal/transverse/vertical | 40/40/40 m/min |
| Working area 1 | |
| Longitudinal | 735 mm |
| Cross | 650 mm |
| Vertical | 560 mm |
| Tool changer | |
| Tool changer plane | vertical |
| Type of gripper | Double gripper |
| Number of tools | 60 |
| Max. tool length | 315 mm |
| Max. tool diameter with occupied adjacent pockets | 80 mm |
| Max. tool dia. with free neighbouring pockets | 160 mm |
| Floor space/Weight | |
| Weight approx. | 14500 Kg |
| NC swivel rotary table | Table surface Ø650 mm |
| Centre bore 32 mm | |
| Maximum load (table centre) 600 Kg | |
| Slot width 14 mm | |
| Number of Slots 9 | |
| Distance between T-Slots 63 mm | |
| Rotation speed max.4. Axis 40 rpm | |
| 4. Axes (swivelling range) 360 x 0,001 degree | |
| 5. Axes (swivelling range) +/- 120 degree | |
| Rotation Speed 5. Axis 20 rpm | |
| Integrated motor spindle speedMASTER® | Drive power (100% DC) 16 kW |
| Drive power (40% DC) 21 kW | |
| Torque (100% DC) 85 Nm | |
| Torque (40% DC) 111 Nm | |
| Speed range - 15000 rpm | |
| Spindle taper HSK-A 63 | |
| Clamping System HSK-A 63 | |
| Direct measuring system | Direct path measuring system |
| Cabine | Full protection cabin |
| Chip removal | Chip removal: manual, from the chip trough |
| Tool magazine, chain vert., 90 pockets | Tool magazine Vertical chain magazine basic with 60 tool pockets HSK-A 63 spindle tapers |
| Spindle taper HSK-A 63 | Spindle taper for HSK-A 63 to DIN 69893 (incl. adaptation working spindle and standard magazine) |
| 3D quickSET extension package | 3D quickSET extension package for each further machine: software / password (only together with option measuring probe and existing set of measuring tools) |
| Tool breakage control mechanical | Tool breakage control mechanical version max. tool length 315 mm |
| Tool measuring in machining area Blum Laser | Tool measuring in machining area Blum Laser DIGILOG Tool length and diameter measurement vertically |
| In-Machine Tool Balancing | In-Machine Tool Balancing Cycle for semi-automatic balancing of tools in the spindle |
| Infrared measuring probe Blum | Infrared measuring probe Type Blum TC50 SK 40 or optionally chosen spindle taper |
| BLUM ToolControl Advanced | BLUM ToolControl Advanced Extension package for BLUM DIGILOG Functions: - Intuitive job creation for standard measuring tasks - Visualisation of all cutting edges - Evaluation of measurement results - Fitting methods - Circular segment cutter - 3D RadiusC |
| BLUM SpindleControl Advanced | BLUM SpindleControl Advanced Extension package for BLUM DIGILOG Functions: - Spindle analysis for preventive maintenance Vibration analysis - Testing at different speeds - Freely definable warning and tolerance limits - Logging and statistical evaluation |
| Production package 40 bar/23 l/min, 600 l tank | Production package: Scraper flight conveyor with coolant unit 600 l/160 gallon, paper band filter Discharge height: 950 mm / 37.4 in Width: 670 mm / 26.4 in Internal coolant supply 40 bar/23 l/min / 580 psi / 6 gallon/min through spindle centre (AD) Exter |
| Rotating clear-view window | Rotating clear-view window cabin door |
| VCS Complete extension package | VCS Complete extension package for each further machine: software / password (only in conjunction with option measuring probe or existing set of measuring tools) |
| Sensorpaket i4.0 | Sensor package i4.0: MPC Machine Protection Control SGS Spindle Growth Sensor ICS flow sensor |
| Cooling | Cooling by air blast through spindle centre, selection with M function |
| Interface for Oil and emulsion mist separator | Interface mechanical and elektrical for oil- and emulsion mist separator |
| Tropical package (ambient temp. max. 50 °C) | Package for tropical climate for ambient temperature at machine location from 35° to 50° Celsius |
| Control cabinet lighting with power outlet | Control cabinet lighting with power outlet Lighting in the control cabinet with motion sensor power outlet 230V - 10A (Type F - Schuko) Other types of outlet on request Connected before the main switch (for this the customer must provide a loadable neutra |
| Operation mode 4 | Operation mode 4 "Process monitoring in the production" Manual intervention with open doors of machining area Release after completed check list |
| CAD-Reader | CAD-Reader: Import DXF files, Hide graphics layers, Automatic contour trace, Optional workpiece zero point, Several contours/drill points selectable |
| Tilted measuring cycle | Tilted measuring cycles. Measuring cycle package for tilted measuring of components to determine the center of the workpiece and for alignment of the rotation center to the coordinates-origin via a straight line or hole. Only in connection with Siemens. |
