금속 작업 기계 / 보링 밀 및 머시닝 센터 / 멀티 스핀들 드릴링 머신
생산자: DMG MORI
모델:CLX 350
기계의 유형: 멀티 스핀들 드릴링 머신
품목 아니오.: 170150029
양: 1
날짜: 13.09.2026
위치:
독일
값:
Seller-item-No.:071813
| General | |
| 2-Axes Universal Turning Center with driven tools, C-axis, Y-axis and counter spindle; Control: DMG MORI SLIMline® Multi-Touch control | |
| Working area | |
| Swing diameter over guide ways | 580 mm |
| Clamping chuck diameter max. | 250 mm |
| Work spindle (left) | |
| Spindle bore | 73 mm |
| Bar diametre | 65 mm |
| Spindle diametre on front bearing | 120 mm |
| Main drive 1 | |
| Drive power (100% DC) | 11 kW |
| Drive power (40% DC) | 16,5 kW |
| Speed range | - 5000 rpm |
| Torque (100% DC) | 112 Nm |
| Max. torque (40% DC) | 168 Nm |
| C-Axis Speed | -100 rpm |
| Torque of C-Axis (holding torque) | 168 Nm |
| Work spindle (right) | |
| Spindle bore | 45 mm |
| Spindle diametre on front bearing | 90 mm |
| Main drive 2 | |
| Drive power (100% DC) | 12,6 kW |
| Drive power (40% DC) | 16,2 kW |
| Speed range | - 5000 rpm |
| Torque (100% DC) | 48 Nm |
| Max. torque (40% DC) | 62 Nm |
| C-Axis Speed | -300 rpm |
| Torque of C-Axis (holding torque) | 62 Nm |
| Slide 1 | |
| Longitudinal stroke | 465 mm |
| Transverse stroke | 185 mm |
| Y axis, vertical | +/- 40 mm |
| Tool holder 1 | |
| Number of tool stations | 12 |
| Shank diametre according to DIN 69880 | 30 mm |
| Number of driven tools | 12 |
| Speed max. | -5000 rpm |
| Power max. (40% DC) | 5,65 kW |
| Floor space/Weight | |
| Dimensions (L x W x H) | 2,8 x 1,78 x 1,85 (3,68 x 1,78 x 1,85) m |
| Weight approx. | 4400 Kg |
| Alternative Speed Turning | Technology cycle Alternating Speed (Turning) Technology cycle for the application of an alternating speed for vibration sensitive set-ups. |
| Pro Time | PROTime Electronic display Display functions: - remaining machining time - remaining parts to be produced - machine status |
| External chuck flushing for main spindle | External chuck flushing for main spindl |
| Pneumatic workpiece ejection device | Pneumatic workpiece ejection device for counter spindle with internal coolant supply for chuck flushing Note: Option recommended for machine equipped with part catcher |
| Double cartridge filter for coolant | Double Cartridge Filter for Coolant Options includes two filters placed on the coolant distributor. When one filter is stocked, operator can manually switched the coolant flow for second filter and clean or change plugged filter in the meantime. Note: |
| Mechanical oil mist extractor type AFS 600 | Mechanical oil mist extractor type AFS 600 600 m³/h with dirtiness indicator Class of filtration H13 Option includes preparation for extractor |
| Bar Feeder KID 80/16, from IEMCA | Bar feeder KID 80/16, from IEMCA, Bar capacity D65 Bar Pusher D=12 mm (for bar diameter between 5 - 12 mm) Bar Pusher D=15 mm (for bar diameter between 10 - 19 mm) Bar Pusher D=21 mm (for bar diameter between 16- 60 mm) Bar Pusher D=26 mm (for bar diamet |
| Bar package & bar Interface | Bar package & bar Interface Option including: - Part catcher, for parts up to D 65 x 200 mm max. workpiece weight 3 kg - Interface for bar feeder or bar loading device (DMG MORI Standard) - Chip conveyor with right side discharge instead of chip |
| DMG MORI Netservice - client | DMG MORI Netservice - client Qualified support by Internet-based remote diagnostics Will be installed on an external PC! |
