Used Complete Bottling Line for PET and Glass 2007 Depalletizer This
unit takes bulk of bottles that are stacked on a pallet and places
them onto an accumulation area before entering the Lowerator unit. The
operation of the machine is manual. There are some forklift
interactions with loading full pallets onto the infeed conveyor,
removing the empty pallets from the discharge conveyor and the
placement of empty pallets at the operator level (layer dividers).
Cleaning is carried out with the machine switched off and the hoist
lowered. Bottle Lowerator The Lowerator transfer the bottles from the
Depalletiser operator level to the lower level Rinser before entering
the Filler. This unit is used for glass bottles only and can be
mechanically adjusted easily depending on different bottle dimensions.
Gripper Rinser Bottle Rinser provides an excellent way to fully clean
the bottles. The bottle rinser is used to rinse both PET and glass
bottles. The machine can be mechanically adjusted to suit different
bottle types. Filling Monoblock Icon (ICON 5000 30/10 Filling and Pick
and Place Capping Machine) The Icon Filler is purchased in 2007. The
Icon Filler (30 filling heads with 10 capping heads) would be capable
of filling: – 10,000bph 1250, 1L Juice (SBO10) maximum
production rates – 14,000 bph 600ml (SBO10 + SBO4) PET
production – Suitable for glass filling bottles Year of
Manufacture:2007 Manufacturer: ICON Arol Capper (Plastic Bottles) The
Arol Capper unit is used to apply plastic caps on the bottles inside
the ICON Filler machine. This unit is located inside the Icon Filler
machine. The pick and place capping turret capable of: – 28mm
flat caps – 28mm Sports Caps – 38mm Flat Caps – Not
suitable for ROPP aluminum caps (use existing Alcoa Capper for these
products) Model: EURO/PK FLAT AND SPORT TURRET 10 HEADS Manufacturing
Year: 2007 Speed: 24000 BPH/MAX Packaging: round PET bottles (diam.
max. 110 mm) Closure: plastic screw FLAT and SPORT caps diam. 28 mm,
Plastic screw FLATcaps diam. 38 mm. Voltage: 415V / 50Hz / 24V. Pitch:
157 mm Pitch diameter: 500 mm Working direction: Clockwise Cap Chute /
Hopper – Used Complete Bottling Line for PET and Glass The
stainless-steel Cap Chute is used to transfer the plastic and the
aluminium caps into the Sorter of the Capper machines for both Arol
and Alcoa Capper. Bottle Inspection/ Rejector & Induction Sealer Cap
detection and rejection unit. This unit detects the presence of a foil
seal in the cap. This system includes a rejecter that will reject
bottles onto a separate conveyor early enough to be reprocessed. Alcoa
Capper (Glass Bottles) This unit is used to apply caps on the glass
bottles. Alcoa ROPP 8 heads capper comes with cap sorter and the Cap
chute is shared with the Arol Capper for Plastic bottles. This unit is
used for the beverage alcohol in the glass bottles. Depending on the
products, 4 heads or 8 heads can be used. The production rate is
maximum 80 bottles per minute. This unit has 2 tuckers and 2 threaders
located opposite to each other and can be mechanically adjusted
depending on the bottle neck diameter. Model: Alcoa Capper VK-138
Headset 55950 Plastic Bottle Inverter / Steriliser This unit is mainly
used in sterilising the PET bottle mouth and surface of caps with
product temperature. The machine speed matches the line speed. Cooling
/ Warming Tunnel The Cooling tunnel unit is used for the pasteurized
products (juices) and the warming U6354234 tunnel is used for the
alcohol products. The Cooling tunnel unit is used to cool the hot
filled products. Cooling the bottles after hot filling is essential to
preserve the taste and nutritional value of the product. The hot
product is run through the stainless-steel tunnel which fitted with
series of nozzles that spray the cool water onto the product. The
warming tunnel is used to warm cold-filled alcoholic products up to
temperature warm enough to prevent condensation on the bottle surface.
This unit helps with labelling and handling of the bottles down to the
production line. Pasteuriser – Used Complete Bottling Line for
PET and Glass The pasteurizer unit is used to sterilizing our juice
products and can be used for milk products as well can run up to
10,000 L/hour with maximum temperature of 100â 1995 Kosme Rotary
Labeller The labelling machine handles the self-adhesive labels made
of paper or plastic. The bottles are rotated into optimal labelling
position. The label then is smoothed after application with the
special roll-on plates. This unit is used to apply self-adhesive
labels of our Galway Pipe bottles. This unit has 3 label head
applicators and can run up to 7000 bottles per hour. The production
rate may vary depending on the bottle / product types. Year of
Manufacture: 1995 Model/ Type: MERKUR 16T S1 S2 ADV 2005 Imball Multi
Packer Machine The Imball Multipacker machine was used to pack the
250ml juice products (4 pack x 6 pack). This unit is not equipped with
오스트레일리아
