We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Thousands of potential buyers are waiting for your machines!
Mingda MD-1000D, approx. 500 operating hours. Installed and used in Belgium. Fully operational and ready to use immediately. SPECIFICATIONS Build volume: 1000 x 1000 x 1000 mm FDM, dual extruder, direct drive, 1.75 mm filament Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C Heated bed max 110 ...
Mingda MD-1000D, approx. 500 operating hours. Installed and used in
Belgium. Fully operational and ready to use immediately.
SPECIFICATIONS
Build volume: 1000 x 1000 x 1000 mm
FDM, dual extruder, direct drive, 1.75 mm filament
Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C
Heated bed max 110 °C (60 °C in approx. 75 s), flexible PEI sheet
Enclosed build chamber
Max 500 mm/s (recommended 200 to 300 mm/s), acceleration 10,000
mm/s², flow 40 mm³/s
Materials: PLA, ABS, ASA, TPU, PETG, PA-CF/GF, PA12-CF, PET-CF/GF,
HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support materials: S-Multi, S-HtPA, water-soluble PVA
Klipper firmware, 7\" touchscreen, WiFi and Ethernet, camera
Remote printing and monitoring, multi-machine control
10 x 10 point auto levelling, input shaper, flow control
Filament run-out detection, power loss recovery, power-on self
check
Closed-loop stepper motors, modular linear guide system, accuracy
±0.1 mm
Dual part cooling system
Emergency stop
100 to 240 V AC, 50/60 Hz, rated power 2700 W
Dimensions: 1680 x 1365 x 1665 mm
Slicer: MINGDA Cura, PrusaSlicer compatible
CONDITION
Used, approx. 500 operating hours. Good working condition.
Auction-ID: A3-46137-21602
페이스 북에서이 컴퓨터를 공유 :
Mingda MD-1000D, approx. 500 operating hours. Installed and used in
Belgium. Fully operational and ready to use immediately.
SPECIFICATIONS
Build volume: 1000 x 1000 x 1000 mm
FDM, dual extruder, direct drive, 1.75 mm filament
Nozzle 0.4 mm (0.6 / 0.8 / 1.0 optional), max 350 °C
Heated bed max 110 °C (60 °C in approx. 75 s), flexible PEI sheet
Enclosed build chamber
Max 500 mm/s (recommended 200 to 300 mm/s), acceleration 10,000
mm/s², flow 40 mm³/s
Materials: PLA, ABS, ASA, TPU, PETG, PA-CF/GF, PA12-CF, PET-CF/GF,
HtPA-CF/GF, ABS-GF25, ABS-CF20, PA-GF25/CF25
Support materials: S-Multi, S-HtPA, water-soluble PVA
Klipper firmware, 7\" touchscreen, WiFi and Ethernet, camera
Remote printing and monitoring, multi-machine control
10 x 10 point auto levelling, input shaper, flow control
Filament run-out detection, power loss recovery, power-on self
check
Closed-loop stepper motors, modular linear guide system, accuracy
±0.1 mm
Dual part cooling system
Emergency stop
100 to 240 V AC, 50/60 Hz, rated power 2700 W
Dimensions: 1680 x 1365 x 1665 mm
Slicer: MINGDA Cura, PrusaSlicer compatible
CONDITION
Used, approx. 500 operating hours. Good working condition.
Auction-ID: A3-46137-21602 seller offer No. resale
98306d18-d403-4f9e-b6ee-9a7c26e6ff9a
