접착제 기계 사용 판매를 위해 (573)

Dimensions (L/W/H): 1700x950x1260 mmWeight: 400 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 300 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x700x500 mmWeight: 120 kgTotal power requirement: 0,25 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1500x1500 mmWeight: 1050 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1320x700x1120 mmWeight: 125 kgTotal power requirement: 1,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1680x930x1200 mmWeight: 350 kgTotal power requirement: 3,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x700x500 mmWeight: 100 kgTotal power requirement: 0,25 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1820x585x1450 mmWeight: 500 kgTotal power requirement: 4 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2650x640x1400 mmWeight: 700 kgTotal power requirement: 5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3200x780x1500 mmWeight: 800 kgTotal power requirement: 8 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 8 kgTotal power requirement: 0,9 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

엣지 매거진 IMA - 6x - 24x 폴드 매거진 - 550 또는 800mm 코일 직경 재고에서 여러 버전을 사용할 수 있습니다. 요청 시 가격.

모따기 유닛 IMA 영어 유형: 08.055 - 다양한 모터 출력 사용 가능 요청 시 가격 (버전에 따라 다름)

여러 밀링 모터 제조사: 페르스케 - 재고에서 사용 가능한 다양한 버전 (0,2에서 8 kW) 요청 시 가격 (버전에 따라 다름) 당신이 찾고 있는 명세를 저희를 알게 하십시오: -힘 - 샤프트 타입 -토크 -형 -전�

The workpiece return transport consists of an air cushion table with pneumatic tilting movement, complete with pusher, return conveyor with motorised belt and a not-driven roller conveyor. The panel comes out of the edge banding machine onto the air cushion table which tilts over and drops it, with the aid of the pusher, onto the return belt, situated at a lower level. The air cushion table has transfer belts to takeover the parts from the edge banding machine. Dimensions of air cushion table 1.200 x 2.400 mm Belt width 1.300 mm Installed power 3 kW workpiece return transport is deliverable for basic edge banding machine length 3.500 up to 12.500 mm

다양한 압력 영역 IMA 영어 - 재고에서 - 가격 요청 가�

플랫 스크레이퍼 IMA 영어 유형: 08.50 가격 요청 가�

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

Contour edge bander Fabrikat: VITAP Type: BC91 EVO New machine Max. flexibility by means of a smart construction - For gluing chamfers on rectangular or formed workpieces - Tilting table 0°-45° - To glue pieces 10-60 mm thickness - Edge material: PVC, melamine, veneer, plastic, laminate, solid wood - Nr. 2 glue spreading rollers - Cutting guillotine up to 3 mm thickness - Glue pot (kg 3), with electronic adjustable heating system - Band length measuring by means of a digital electronic counter - Tape cut by foot pedal to edge just one piece and measuring edge length - Feeding speed adjustable from 7m to 20m per min. Solid Phenolic table - Easy to clean - With no transmission of heat - Plastic cups to raise the piece above the table - 2 kg vitap glue 280.00 for test - CE standards Optional: - Enlarged tape plate 800 mm - Semi-automatic end-c ...

Glue application machine Brand: OMMA Type: FSC 600 New machine Technical details: Useful working width mm 600 Maximum working thickness mm 90 Working speed mt/min 19 Height of working level mm 905 Spreading rollers Ø mm 185 Standard grooving lines/inch 14 Installed power kW 0.37 Colour Ral 7035 Command side (compared to working direction) Right Standard voltage v 400/50/3 Technical equipment: - Spreading rubber rollers coated with grinded surface. - Thickness graduate indicator. - Top & bottom glue dosing tanks in grinded steel with ground profile and micrometric glue regulation. - Parallelism regulation between spreading rollers. - Rollers protection with security plate and foot control in front of the machine that stop immediately the machine if activate. - Security front foot barrier. - Steel zinc collecting tank of the cleaning water. - E ...

득점은 IMA를 보았다 -제�

정밀 절단 장치 IMA 영어 유형: 08.376

홈 가공 유닛 IMA 영어 유형: 08.181 - 측면에서만 그루�

홈 가공/정밀 절단을 위한 유닛 제조사: IMA

정밀 절단용 유닛 제조사: IMA

접착 장치 IMA 더블 코일 매거진으로 완성, 접착제 응용 장치 및 압력 영�

어쿠스틱 후드 für IMA 엣지 밴딩 머신은 재고에서 사용 가능한 다양한 버전과 치수로 제공됩니다. 개조 / 새로운 래커는 추가 요금으로 이용 가능합니다.

샌딩 유닛 제조사: Heesemann 유형: M2

샌딩 유닛 제조사: HOMAG 유형: PS10