하위 범주
(3 카테고리 레벨)
생산자:
(범주: 204)
Technical data Manufacturer: G+H Machine Type: Surface Grinding Machine Grinding area: 600 x 450 mm Magnetic plate: 600 x 400 mm Clamping surface to spindle center: 140–525 mm Max. table load: 600 kg Max. table longitudinal movement: 650 mm Max. transverse movement: 400 mm Table speed: 5–35,000 mm/min Transverse and vertical speed: 100–1,000 mm/min Grinding wheel: 300 x 50 x 76.2 mm Max. grinding wheel Ø: 300 mm Spindle motor: 7.5 kW Total connected load: approx. 15 kW Operating voltage: 400 V / 3 phases Mains frequency: 50 Hz Machine weight: approx. 2,100 kg Configuration Standard magnetic plate 600 x 400 mm, electric infeed with 0.001 or 0.01 mm per increment, abrasive media holder 20–30 mm. Remarks The technical information was taken from the operating instructions that came with the machine. Scope of functions and scope of delivery according to inspection. Accesso ...
Milwaukee M18 BOS125-0 18V Li-Ion Battery Random Orbital Sander With the Milwaukee M18 BOS125-0 18V Li-Ion Battery random orbital sander, you have a cordless sander that steers pleasantly when sanding wood, metal, and painted parts. As a cordless random orbital sander, you can give any surface the right approach with six speed settings that suit coarse work and tight finishes. The motor delivers 14000 to 24000 sanding movements per minute so that you can continue faster and still keep control over the end result. Sandpaper is easy to change via the Velcro attachment and with 125mm sanding sole you work neatly along edges and on flat parts. During sanding, the dust box with filter keeps the dust in place better and with the vacuum adapter you can connect directly to Milwaukee vacuum cleaners. REDLINK electronics help with overload protection while REDLITHIUM battery technology is built fo ...
- Sanding width 2600 mm. - Variable feed speed. - It consists of: • Automatic charging station. • STEINEMANN sander for board calibration with sanding rollers. • STEINEMANN sander for finishing with sanding pads. • STEINEMANN dust filter system. • CASSEL digital metal detector. • Slitting station. • Automatic unloading station with 3-position gantry stacker. The roller tables on which the boards are unloaded are NOT included. • Intermediate conveyors. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-49881-19
Number of sanding units: 4 Stsanding width: 190 mmSanding height max.: 4-180 mmweight: 4200 kgHess Expert 4-belt single wood sanding machinemachine will be checked by our technicians--------------------------------------Ø Grinding at the bottom/topØ With 2 offset grinding units each (bottom and top)Ø Grinding units (bottom and top) connected in series according to theDressing principleØ Pre-sanding with coarse grit (calibrate)Ø Regrinding with fine grit (finish)Ø Central motorized height adjustment of the lower grinding unitsØ Central motorized and synchronous height adjustment of the entire upperGrinding and brushing units including the upper transport unitsØ Oscillating sanding belt utilization (during the sanding process)Ø Absolute power connection thanks to 5.5 KW motors and large dimensionsdrive drumsØ Oxide ceramic grinding shoe for- exact surface geometry- no adjustment ...
Technical data Manufacturer: F. Zimmermann GmbH, Denkendorf/Esslingen Type: PS 1/2 Machine Type: Vertical Belt Grinder Power: 1.35 kW Voltage: 380 V Frequency: 50 Hz Configuration Large work table with sanding belt feed-through Adjustable strap guides Control panel with switching levels I/II, left/right rotation, stop button and emergency stop Remarks The machine comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-24
Number of sanding units: 2 st.sanding width: 180 mmSanding height max.: 150 mmMAWEG Robert Hildebrand Saturn DuoProfessional two-belt finish sanding machine with brushing unitDouble-sided, sands from top and bottomPneumatic belt oscillationPneumatic belt tensioningFeed via top and bottom conveyor belts with spring-loadedhold-down rollers, infinitely variable speed (5–15 m/min)Workpiece thickness adjustment with pre-selectable stock removal amount atmachine infeed, based on sensing the raw timber thicknessAdjustment to wood thickness via motorized positioning of themachines upper sectionDigital thickness setting via mechanical counter with 0.1 mm display andzero-point adjustmentSafety switch for oversized wood thickness at machine infeedDouble-sided brushing unit with integrated workpiece blow-offSanding belt blow-off (top and bottom)Belt breakage monitoring switch with automatic shutdo ...
MACRYL grinding/polishing machine type MAC 2.1 with large work table and separate control panel Including FEZER vacuum pump, vacuum accessories and connected extraction system Technical data Manufacturer: MACRYL / A. Wolf Maschinen GmbH Type: MAC 2.1 Engine No.: 611 24 Year of construction: approx. 1991 Electrical connection: approx. 380 V / 50 Hz Compressed air connection: approx. 6 bar Separate control panel Emergency stop Suction connection available Vacuum system available Machine dimensions (L × W × H): approx. 3,200 × 1,500 × 1,300 mm Weight: approx. 700–1,000 kg FEZER Vacuum Pump Manufacturer: FEZER Type: approx. 016-118 Vacuum: approx. 20 mbar Oil capacity: approx. 0.5 l Engine oil: SAE 30 Vacuum pressure gauge available Vacuum hoses available Auction-ID: A1-49712-10
grinding length: 400 mmgrinding width: 300 mmworkpiece height: 375 mmelectro magnetic clamping plate: 400 x 250 mmgrinding wheel size: Ø 300 x 50 x 76,2 mmdressing device automatic: + Kompensation coolant tank: 210 ltotal power requirement: 12 kWweight of the machine ca.: 3 tdimensions of the machine ca.: 3,5 x 2 x 2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
\"1. Combination unit rubber roller with electric sanding shoe (function not tested) 2. Shoe power unit Cleaning brush incl. rigid sanding shoe for solid wood pulp Grinding width max.: 1100 mm Sanding belt dimensions: 2150x1130 mm Carpet feed speed: infinitely variable Sanding belt speeds per unit: 1 aggregate: 18 m/sec - 2 units: 2 speeds Roller table at the inlet and outlet incl. vacuum + vacuum blower Total connected load: 33.4 Kw SALE WITHOUT WARRANTY! Data are taken from the manufacturer's brochure/documents and may differ from the actual values. ATTENTION: it is expressly pointed out that this lot only corresponds to the scope of the product description. If objects can be seen in the photo that are not expressly listed in the lot description, they are not part of the sale. Of course, this also applies to tools, additional equipment, accessories, software ...
METABO K 100 industrial belt sander, designed for grinding, deburring and finishing operations in the mechanical workshop or in industrial production. This METABO model is a professional backstand for precise and efficient material removal, particularly used in the metalworking, locksmithing and boilermaking sectors. Thanks to its large tread size and its adapted speed, it offers an excellent compromise between power, precision and quality of finish. Ideal machine for: Machine shops Industrial maintenance Metal construction Preparation of parts before welding Deburring and finishing The METABO brand is recognized for the robustness and reliability of its professional equipment. Auction-ID: A1-48554-39
Bench-mounted industrial belt sander, ideal for grinding, deburring and finishing operations in mechanical workshops or metal fabrications. This type of machine, also known as a backstand or belt grinder, is widely used for metalworking, allowing for precise and fast material removal. The set is ready to be used as a complete workstation with a heavy-duty workbench, making it an ideal solution for: Mechanical workshops Boilermaking locksmith Industrial maintenance Production and manufacturing The vertical abrasive belt allows you to work efficiently on different types of workpieces, especially for deburring and preparation before welding. Auction-ID: A1-48554-37
Working width: 910 mmNumber of sanding units: 1 st.Workpiece thickness max.: 3 - 160 mmsanding belt measurements: 2.200 x 1.010 mmFeed motor: 0,55/0,75 kWFeed speed: 4,5 / 9 m/min.Weight: 1.210 kg: 18,5 m/secoutput: 11 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of sanding units: 2 st.sanding width: 190 mmSanding height max.: 4-150 mmHess Junior single wood sanding machine--------------------------------Machine in checking process at the moment!Basic structure:Stable, heavy welded construction made of thick-walled rectangular hollow profiles with additional, statically calculated reinforcements for optimalVibration dampening.Staggered grinding units with large dimensionsBelt drive drums for slip-free belt running. Two-point suction for directand airborne dust extraction with integrated blow-off device. grinding unitsin heavy steel plate construction as the basis for vibration-damped,quiet tape running. All guides as a ball linear set on hardened andpolished waves. Permanent precision thanks to dust and dirt protectionthe ball linear sets. Contact roller and sanding pad in a balanced ratiofor sanding belt grain load. The large-sized drive ...
Table dimensions: 1250 x 750 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
grinding length: 500 mmgrinding width: 200 mmworkpiece height: 250 mmturning speeds: 1000 - 4000 U/mintable surface area: 600 x 200 mmgrinding wheel size: 225 x 20 x 51 mmgrinding spindle drive: 1,5 kWtable feed: 1 - 20 m/mintotal power requirement: 2,6 kWweight of the machine ca.: 2 tdimensions of the machine ca.: 2,6 x 1,6 x 1,8 mAutomatic feed, 2-axis digital display, stepless speed control,Water-cooled sine angle magnetic clamping plate 400x135mm, 10mm magnetic pitchSony digital display with scales for transverse and height adjustmentSwing-out dresser on the grinding headTable direction reversal with contactless inductive switchesLOSMA belt filter coolant systemThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
1.500 € 
