하위 범주
(3 카테고리 레벨)
생산자:
(범주: 102)
선반 PPL 200-225 - 베드에서 선회하는 직경: 400-450 mm - 슬라이드를 통한 회전 직경: 235-285 mm - 브리지가 포함된 오프셋: 회전 직경 600-650mm - 페이스플레이트 직경: 350mm - 적재함 폭: 320 mm - 엔진 출력: 5.5마력 - 공구 캐리지: 스트로크 150 mm 상태가 좋고 완전히 기능하며, 현장에서 직접 보고 시험해 볼 수 있습니다. 해외 배송도 가능합니다. 시청: 기본적으로, 오해를 배제하기 위해 구매 전에 전원으로 문서를 확인하고 테스트할 수 있다는 점을 말씀드리고 싶습니다. 구매 전에 혼동을 피하기 위해 질문해 주세요. 일반적인 질문이 있거나 조문 예약을 원하시면 언제든지 아래 또는 위의 전화번호로 연락드릴 수 있습니다. 설명과 이전 판매 기록의 오류는 제외됩니다. ...
CNC 선반 제조사: 길데마이스터 종류: CTX 410 V3 기계 번호: 0136004581 제작 연도: 2006 제어: 지멘스 840D 샵턴 둘레 직경: 505 mm 척 직경: 210 방추 통로: 65 mm 구동 출력: 40/100% ED 21/28 KW 속도 범위는 – 에서 25-5000까지입니다 대략 크기: 4300x2000x1800 무게 대략: 5600 kg - 12단 리볼버 - VDI 40 - C축 - 동력 공구 12개 스테이션 - 패키지 바 가공 - 칩 컨베이어 - 꼬리받기 - SMW 오토블록 210BB - 구동식 공구 홀더 3배 축축 - 구동식 공구 홀더 2배 방사형 - 다양한 기타 공구 홀더 - 리볼버용 신형 엔진 오류 제
CNC 선반 제조사: 길데마이스터 종류: CTX 420 리니어 V4 기계 번호: 02260005181 제작 연도: 2005 제어: 지멘스 840D 샵턴 원경 직경: 680 척 직경: 250 구동 출력: 40/100% ED: 37/25 KW 속도 범위는 – 에서 20-5000 rpm까지 무게 대략: 6500 kg - 12단 리볼버 - VDI 40 - C축 - Y축 - 동력 공구 12개 스테이션 - 칩 컨베이어 - 꼬리받기 - SMW 오토블록 250 BH 오류 제
An INDEX CNC lathe with counter spindle and IEMCA bar feeder is offered. Main spindle bore: 65mm, max. spindle speed: 7000rpm, axes: 4, live tooling: possible, tool system: VDI25, spindle operating hours: approx. 80000h, control: Siemens 840D. 2) Bar feeder: IEMCA Master 880/MP 33 L, Year of manufacture: 2004, max. bar length: 3300mm, round bars: 8mm-80mm, hexagonal bars: 7mm-65mm, square bars: 10mm-50mm, max. bar weight: 120kg, min. remnant length: 110mm, bar feeder weight: approx. 1350kg. Including chip conveyor. Machine was continuously maintained. The machine is available from October. Documentation available. Inspection possible by arrangement.
Horizontal turning machine manufactured in 1997. This BOEHRINGER DUC 560/2000 features a maximum turning diameter of 570 mm and a turning length of 2000 mm. It includes an 8-position disc turret and a three-jaw chuck with a diameter of 200 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER DUC 560/2000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details.
Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible.
Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible.
Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.
Horizontal turning machine manufactured in 2001. This EMCO EMCOMAT 200X1000 features a turning length of 1,000 mm and a maximum turning diameter over bed of 400 mm. It is equipped with a Fagor 8055 CNC control unit and includes a SMW AUTOBLOCK wedge-type chuck and a Multifix quick-change tool holder. If you are looking to get high-quality turning capabilities, consider the EMCO EMCOMAT 200X1000 machine we have for sale. Contact us for further details.
Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details.
This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details.
Distance between centers: 2000mm, control: Siemens Sinumerik 810, the controls flash memory is currently probably defective, but the parameters can still be accessed. an on-site inspection is possible.
A Buffalo CNC lathe in need of repair is offered for sale. Center height: 200mm, distance between centers: 880mm, chuck diameter: 160mm, swing over bed: 410mm, swing over cross slide: 230mm, bed width: 260mm, spindle bore: 46mm, spindle nose: A2-5, max. spindle speed: 5000rpm, X-axis travel: 190mm, Z-axis travel: 855mm, rapid traverse: 12m/min, tailstock quill diameter: 58mm, tailstock quill travel: 140mm, tailstock quill taper: MT4, control: Fagor 8055 TC. Accessories included. Dimensions X/Y/Z: approx. 2286mm/1800mm/2230mm, weight: approx. 2350kg. The feed motor of the spindle drive is defective. An on-site inspection is possible.
Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.
Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.
Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.
다양한 퀵 체인지 홀더 / 퀵 체인지 홀더 / 액세서리 총 42개 전부: 7장의 WDL 4/50 16 WDR 4/40 WDL 4/40 10장짜리 3 pc WB 4/60⌀ 3장. WBW 4/60⌀ 1장. WBW 23/60⌀ 유형 없는 2개 관심 있는 상품을 알려주시면 제안을 받으실 수 있습니다. 더 많은 사진을 기꺼이 제공해 드리겠습니다.
여기에는 Weiler DZ 65, 16-fold Duplomatic Stern 포탑, 2개의 스핀들, 두 스핀들 모두에 콜렛 헤드, 모든 회전 위치에 구동 공구가 장착되어 있습니다. 칩 컨베이어, 2개 스핀들을 통한 냉각수, 2번째 스핀들 스프링 배출기, 로드 피더 연결, 드립 트레이를 통한 부품 제거, 부품 컨베이어 벨트, 다양한 스핀들 인서트 튜브, 칩 컨베이어, 재료 공급 Irco Profimat 3m
수직 2스핀들 선반 센터 - 컨트롤 지멘스 840 D - 머신 베드 VSC 400 듀오 - 2개의 디스크 포탑 12 x 직경 40 mm, 구동 - 추가 시추 및 카운터 침강 스테이션 2개 - 개방형 작업물 운송 시스템 - 전이와 회전 유닛 - 외부 처리 시스템과의 인터페이스 - 중앙 냉각 센터 공급 고압 펌프 70바 - 픽업 장치와 클램핑 장치를 분리하는 것 - 작업물 측정 - 도구 모니터링 - Emag 네트워크 옵션 - 자매 도구 관리 둘레 직경 260mm X-트래블 860mm Z-트래블 200mm 주 스핀들 2 최대 속도 4500 1분당 스핀들 간격 1055mm 메인 드라이브 2 교류 비동기 모터 6ß/100% ED 39/28 KW 최대 토크 460 Nm 빠른 횡단 x/z 45/30 m/
막대 직경: 8 mm에서 65 mm (원형 재료) 낚싯대 길이(33L): 약 3.3미터 기계 종류: 고정식 스핀들 헤드 (자동 선반) 탄창 종류: MP 탄창(다중 탄창)
A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.
Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. ...
A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.
Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...
Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...
turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
