하위 범주
(3 카테고리 레벨)
생산자:
(범주: 102)
Max. turning diameter: 1000mm, max. swing diameter: 1250mm, max. workpiece diameter: 1000mm, max. workpiece length: 850mm, max. workpiece weight: 1000kg, X/Z travel: 1250mm/1000mm, max. speed: 900rpm, feed rate: 14m/min, rapid traverse: 20m/min, spindle nose: DIN 55026 short taper size A15, tool interface: DIN 69880 VDI60 tool holder, spindle diameter at the front bearing: 240mm, control: Siemens Sinumerik 840D. Machine weight: approx. 25t, space requirement: 85m². Equipment: SMW IN-D 1000 chuck, chip conveyor. The machine has no driven tools. Documentation available. Inspection possible by appointment.
Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.
Center height: 450mm, distance between centers: 3000mm, fuse protection: 630A, rated current: 46A, control voltage: 220V, operating voltage: 380V, frequency: 50Hz, connected load: 22,5kW, weight: 6,1t, with four-jaw chuck (diameter: 800mm), tailstock, quill and three steady rests. An on-site inspection is possible.
다양한 퀵 체인지 홀더 / 퀵 체인지 홀더 / 액세서리 총 42개 전부: 7장의 WDL 4/50 16 WDR 4/40 WDL 4/40 10장짜리 3 pc WB 4/60⌀ 3장. WBW 4/60⌀ 1장. WBW 23/60⌀ 유형 없는 2개 관심 있는 상품을 알려주시면 제안을 받으실 수 있습니다. 더 많은 사진을 기꺼이 제공해 드리겠습니다.
여기에는 Weiler DZ 65, 16-fold Duplomatic Stern 포탑, 2개의 스핀들, 두 스핀들 모두에 콜렛 헤드, 모든 회전 위치에 구동 공구가 장착되어 있습니다. 칩 컨베이어, 2개 스핀들을 통한 냉각수, 2번째 스핀들 스프링 배출기, 로드 피더 연결, 드립 트레이를 통한 부품 제거, 부품 컨베이어 벨트, 다양한 스핀들 인서트 튜브, 칩 컨베이어, 재료 공급 Irco Profimat 3m
수직 2스핀들 선반 센터 - 컨트롤 지멘스 840 D - 머신 베드 VSC 400 듀오 - 2개의 디스크 포탑 12 x 직경 40 mm, 구동 - 추가 시추 및 카운터 침강 스테이션 2개 - 개방형 작업물 운송 시스템 - 전이와 회전 유닛 - 외부 처리 시스템과의 인터페이스 - 중앙 냉각 센터 공급 고압 펌프 70바 - 픽업 장치와 클램핑 장치를 분리하는 것 - 작업물 측정 - 도구 모니터링 - Emag 네트워크 옵션 - 자매 도구 관리 둘레 직경 260mm X-트래블 860mm Z-트래블 200mm 주 스핀들 2 최대 속도 4500 1분당 스핀들 간격 1055mm 메인 드라이브 2 교류 비동기 모터 6ß/100% ED 39/28 KW 최대 토크 460 Nm 빠른 횡단 x/z 45/30 m/
막대 직경: 8 mm에서 65 mm (원형 재료) 낚싯대 길이(33L): 약 3.3미터 기계 종류: 고정식 스핀들 헤드 (자동 선반) 탄창 종류: MP 탄창(다중 탄창)
A Hitachi Seiki CNC turning center in need of repair is offered for sale. Max. turning diameter: approx. 255mm, max. turning length: approx. 380mm, X/Z travel: 200mm/400mm, spindle speed: up to approx. 3600rpm, spindle motor power: 11kW, bar capacity: approx. 64mm, spindle bore: approx. 78mm, chuck size: approx. 255mm, tool turret: 10/12-station, tailstock taper: MT5, control: SEICOS-L MULTI, version V3R5.G. Weight: approx. 4300kg. A tool holder on the chuck is broken. An on-site inspection is possible.
Cross slide NC1-left, X1-axis: 450mm, cross slide NC1-left, Z1-axis: 1980mm, cross slide NC2-right, X2-axis: 450mm, cross slide NC2-right, Z2-axis: 1980mm, M-head slide-left, Q1-axis: 1980mm, M-head slide-right, Q2-axis: 1980mm, tailstock + steady rest slide-left, W1-axis: 1980mm, tailstock + steady rest slide-right, W2-axis: 1980mm, Y-axis: +/-65mm, workpiece length: 760-3000mm, workpiece clamping diameter: 20-200mm, main drive power: 2x 37kW, main drive speed (stepless): 0-2200/min, tool drive speed (stepless): 0-2320/min, tool holder: VDI50, tailstock center: MK 5, number of tool holders: 12, steady rest: SLU-5 SO, steady rest clamping diameter: 20-200mm, working height: 1300mm, max. workpiece diameter: 20-200mm, max. workpiece weight: 250kg, workpiece drive/clamping: 2x hydraulically operated SAV front-end chucks, max. chuck through-bore diameter: 210mm, spindle power: 2x 37kW, max. ...
A CNC lathe Optimum is offered. Swing over bed/cross slide: 300mm/200mm, distance between centers: 430mm, X/Z travel: 145mm/465mm, X/Z rapid traverse: 10m/min/12m/min, bar capacity: 30mm, spindle bore: 30mm, max. spindle speed: 4000rpm, tool stations: 6, control: Siemens SINUMERIK 808D ADVANCED. Machine dimensions X/Y/Z: approx. 1655mm/1590mm/1955mm, weight: approx. 832kg. An on-site inspection is possible.
Workpiece length: 700-2400mm, workpiece diameter: 50-200mm, main spindle drive power: 2x 37kW, max. chuck through-bore: 210mm, chuck piston stroke: 25mm, chuck stroke per jaw: 11.1mm, max. chuck actuating force: 52.5kN, max. chuck actuating pressure: 30bar, max. chuck speed: 2000/min, loading and unloading unit range: 2600mm, center clamping head travel: 1200mm, center clamping head stroke: 1200mm, main fuse: 315A, connected load: 150kW, overall length: approx. 10,640mm, main section length: 6800mm, width: 2370mm, height: 2860mm, overall height including superstructure: 3450mm, operating hours: 3143h. With chip conveyor, loading and unloading unit, fixed center clamping head, movable center clamping head, control panel, ILT air cleaner, electrical cabinet, hydraulic cabinet, coolant tank for motor cooling and coolant tank for tool cooling and documentation. Partially overhauled by the ma ...
Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...
turning diameter over bed: 500 mmturning diameter over slide rest: 300 mmturning length: 1000 mmtotal power requirement: ? kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,511,5 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Miyano BNA-42 MSYYear of manuf. : 2012 Control : Mitsubishi M70 Turning length : 100 mm____________Description:Mainspindle:Technology:Belt-driven spindleSpeed:6.000 rpmPower (max.):7,5 kWTorque (max.):60,8 NmBarcapacity:42 mmC-Axis:0,001°Workpiececlamping:Collet chuck, Type 173ESubspindle:Technology:Belt-driven spindleSpeed:5.000 rpmPower (max.):5,5 kWTorque (max.):38,7 NmC-Axis:0,001°Workpiececlamping:Collet chuckMovement in X/Z:140/310 mmRapid travers in X/Z:12 m/minToolcarrier (X/Y/Z):Technology:Turret with 8 stationsTooldrive:5.000 rpmMovement in X/Y/Z:140/70/235 mmRapid travers in X/Y/Z:20 m/minEquipment/Accessory:Chipmanagement:Chip conveyorCoolingmanagement:Cooling pumpRawmaterialfeed:Bar laoder, IEMCA Master 80 HFFinishpart removal:Part catcher with conveyorbeltFire-extinguishing unit:Kraft + BauerFurther Equipment:Trafo
Traub TNX 65Year of manuf. : 2011 Control : Mitsubishi TX8i-s ____________Description:Mainspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmBarcapacity:65 mmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Subspindle:Technology:MotorspindleSpeed:5.000 rpmPower:22,6 kWTorque:180 NmWorkpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65Ejector:Hydraulic with flushToolcarrier I (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier II (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 mmRapid travers in X/Y/Z:20/20/40 m/minToolcarrier III (X/Y/Z):Technology:Turret with 10 stationsTaper:VDI30Tooldrive:6.000 rpm, 5,5 kW, 17,5 NmMovement in X/Y/Z:175/80/650 ...
X-axis travel: 220 mm, Z-axis travel: 635 mm, swing diameter over the bed cover: 570 mm, swing diameter over the cross-slide cover: 420 mm, speed range: 25-5,000 rpm, spindle bore diameter: 65 mm, chuck diameter: 250 mm, tailstock travel: 550 mm, main spindle drive power at 100% duty cycle: 21 kW, maximum torque: 240 Nm, C-axis holding torque: 200 Nm, control system: Heidenhain EP 4290 TP, connected load: 44 kVA, length: 3,250 mm, width: 1,750 mm, height: 2,300 mm, weight without chip conveyor: 5.3 t, operating hours: 16,930 h. Equipment: Hydraulically adjustable three-jaw chuck with various interchangeable jaws, MK4 tailstock quill, 12-station VDI 30 disc turret with 6 driven tool stations, tool measuring arm, workpiece pick-up device, coolant system, chip conveyor, coolant mist extraction system, various tool holders, Drehwerk turning and milling tools including driven tools, two tool ...
Turning diameter: 500 mm, swing diameter over the cross slide: 290 mm, turning length: 1500 mm, spindle speed: 8 to 2800 rpm with three gear ranges, spindle bore diameter: 70 mm, three-jaw chuck diameter: 250 mm, tailstock quill taper: MT4, quill travel: 180 mm, connected load: 24 kVA, control system: Heidenhain Manual Plus, length: 3200 mm, width: 1700 mm, height: 1800 mm, weight: 3.2 t, operating hours: 42,733 h. The machine is equipped with a manual tailstock, chuck guard, coolant system, Multifix tool holder, various tool holders, various drill chucks, various turning and drilling tools, interchangeable jaws for the three-jaw chuck, a depth stop for the main spindle, a tool cabinet and documentation. The machine was completely overhauled by the manufacturer in 2010. An on-site inspection is possible.
기계는 오쿠마가 매년 정비를 받았습니다 9개의 CNC 축을 갖춘 CNC 선반 및 밀링 센터, 오쿠마 맥턴 350W, 제조 연도 2004년, OSP-E 100L, 추가 매거진, 탄창 80 Ww 구획, C축의 주 스핀들, C축의 카운터 스핀들, Y축 슬라이드 탑 / 밀링 스핀들, HSK 63 장착, 스텝리스 B축은 밀링 스핀들로 구성되어 있습니다. 중심 폭 1500 mm, 스핀들 보온 80 mm, 최대 유동 550 mm, 스위블 350 mm, 리볼버 하부 12층 합판에 리볼버를 붙여 있습니다. 도구들, 인터라이트 컴팩트 필터 시스템 900리터, 흡입, 스핀들 작동 시간 약 18300시간, 페네푀더러, 툴 체인저 그리퍼 암 완전히 교체했습니다, 고압 냉각, WZG 측정 암, 공구 체인저 전면 정비, 주 스핀들 키타가와 B - 210, 서브스핀들 기타가와 B - 208,
와일러 DZ 40, 제조 연도 2008년, 컨트롤 지멘스 840 D, 이동 X/Z 200/350 mm, 회전 직경 180 mm, 밥크니 에브 유이르제프 유통 부수 Ø 최대 560 mm, Y축 +/- 25 mm, Q 축 / 프로그래머블 테일스톡, Q축 이동 거리는 360 mm, Q축 측정 시스템이 회전하며, 꼬리지대 MK 4, 주 스핀들 최대 로드 통로 42mm, 스핀들 보컬은 52 mm였다. 빠른 횡단 X/Z/Q 30/30/20 m/분, 포탑 16 속도 - 모든 역 구동, VDI 25, 축 직경 25 mm, 요청 중. 최대 4,500rpm의 공구, 부품 트레이, 액세서리, 요청 중. 툴홀더, 경직된 홀더들,
길드 마스터 CTX 510 제어: Siemens 840 D with 샵 - 턴 제작 연도: 2004 트래블 X / Z: 300 / 1050 mm 리볼버: 12단 공구 홀더: VDI 40 Bsbmezmxz Roknrzodf 스핀들 속도 최대: 3,500 rpm 바 통로: 90 mm 퀼 이동 거리: 150 mm 꼬리받이 냉각 20바 척 크기 315mm 스핀들 시간 약 14,000 0부터 5까지의 배치 크기가 기계에서 생산되었습니다 프로그래밍은 기계에서 이루어졌습니다
This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details.
Manual lead screw and feed rod lathe manufactured in 2018. This Optimum TH 4610 features a distance between centers of 1060 mm and a swing over bed of 460 mm. It has a spindle speed range of 25 – 2000 U/min and can handle a maximum workpiece weight of 300 kg. If you are looking to get high-quality turning capabilities, consider the Optimum TH 4610 machine we have for sale. Contact us for further details.
A Krewema CNC large-format semi-frontal lathe is available. X/Z travel: 1500mm/850mm, center height: 475mm, distance between centers base/bed extended: 1685mm/2685mm, max. turning diameter over bed/cross slide: 935mm/620mm, max. swing diameter in the gap: 1600mm, main spindle bore: 155mm, tailstock quill diameter: 140mm, quill taper: MK6, quill stroke: 300mm, tool turret: Sauter, tool stations: 4, 3-jaw chuck diameter: 630mm, faceplate: Schunk, faceplate diameter: 1000mm, control: Siemens 840D sl ShopMill. Including coolant system, external coolant nozzles and chip conveyor. Documentation available. An on-site inspection is possible.
Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details.
A Xiangfan/SPARK CNC large-format engine lathe is available. Swing diameter over bed/cross slide: 2200mm/1800mm, bed width: 1100mm, distance between centers: 8000mm, max. turning length: 7500mm, max. workpiece weight: 20t, max. workpiece weight between centers: 19t, main spindle bore: 140mm, bar capacity: 100mm, spindle speed: 200rpm, X/Z-axis travel: 920mm/7500mm, feed rate: 2m/min, rapid traverse: 3m/min, tool stations: 4, chuck jaw count: 4, chuck diameter: 2200mm, chip conveyor length: 8000mm, control: Siemens SINUMERIK 802D. Including coolant system, mandrel, chip conveyor and measuring system. Documentation available. An on-site inspection is possible.
필립스 B2T 제어 둘레 직경 640mm 가공 직경 종방향 550mm 드럼 터렛의 가공 직경 450mm 회전 길이 1000mm 스핀들 속도 2,240 분-1 스핀들 보어 103mm 12단 드럼 포탑 VDI 60 칩 컨베이어
