기계류의 종류
(양: > 9)
생산자:
(범주: 2500)
This Bmw K100RS 16V can go to a new owner because I just don't drive it enough. The engine runs nicely, drives and shifts well. It stands on a set of K1200 wheels with good tires, which makes this bike steer wonderfully. The original wheels, brake discs and rear caliper are of course present. The exhaust is very neat and has no rust or cracks (common with these types) and it has a rare original lower fairing. A lot has been done recently: -Oil + filter changed -Baking & cardan oil changed -Replace the stem of the master cylinder -Brake fluid changed -Air filter replacement -Valve clearance adjusted -Sync tuned -Steering head bearings replaced Replace -Swingarm and paralever bearings adjusted Auction-ID: A1-40304-4
Cruse control, heated grip, various driving modes, adjustable suspension, adjustable windscreen, phone holder with wireles charging with usb port, keyless drive, Arrow. 6 volt charging point. Auction-ID: A1-47414-206
Equipped with engine: 125 cc, 4-stroke, 11 hp; Fuel: petrol (4-stroke); Transmission: Shift; Brakes: hydraulic disc brakes; Tire size: front 17\" / rear 14\"; Transport dimensions (in box): 135 × 45 × 65 cm; Transport weight: 78kg; Unused in box Auction-ID: A1-47414-276
Unused, CE, Adjustable suspension, 3500 LBS Winch, 3.5 inch instrument display, Comfartable seats, CF moto engine, Half metal door, 14 inch Wheels rim with blead lock, Rear cargo box, Rear Tail Light Auction-ID: A1-40304-20
disk brush 510mm; squeegee width 850mm; clear water tank 55L; Recovery 60L; work capacity 2000m/h; Voltage 24V; Battery 200Ah212V; Power 1300W; battery monitor; light; speed regulator; horn; Charger; manual; 7535 Auction-ID: A1-49372-207
- Load capacity: 250 kg. - Maximum hoist lift: 3.5 m. - Power supply 380 V, three-phase, 50 Hz. - Two lifting speeds: 2.2 - 8.7 m/min. - IP54 protection. - Distance to the axle: 3,500 mm. - Height of the structure: 3,000 mm. - Metal structure included. - Operating conditions of this machine: unchecked. - EX WORKS Sale. Dismantling, disconnection, loading and removal at the expense of the buyer, who must comply with current regulations on occupational risk prevention, health and safety in industrial work, providing the necessary documentation, insurance and accreditations. Auction-ID: A7-48166-12
Air-cooled, ABS (abs Light on), 883cc evolution V-twin, 12.5 liter fuel tank, toothed belt drive, bobber version, side mirrors, solo seat. (Technical condition unknown) Viewing day possible by appointment: l.vanmerrienboer@troostwijkauctions.com Auction-ID: A1-47414-207
Note, has problem with drive shaft (supplied separately); Don't drive! Auction-ID: A1-47387-213
Kärcher BR 55/60 W industrial scrubber drier for professional cleaning of workshops, warehouses, production areas, garages, logistics areas and industrial buildings. This floor cleaning machine combines washing and vacuuming to leave surfaces clean and quickly dry. The reputation of the Kärcher brand and the robust design of the BR series make it a sought-after piece of equipment for industrial maintenance, cleaning companies and technical services. Auction-ID: A1-48554-332
Flat trunk with CW30 coupling / new Hardox ears / Hardox knife 2000mm wide / 900mm high / 1000mm deep / 650 kg / Auction-ID: A3-46151-11990
Machine number: 1300-825Operating voltage: 400 V Frequency: 50 HzConnection: 7.5Rated current: 16 AMax. container loading: 500 kgMax. permissible average container load front: 500 kg for max. 37 containers and rear: 500 kg for max. 38 containers, max. total load: 40,000 (2 x 20,000 kg)Dimensions per panelau: 1300 x 900 mmwithout contentsAttention: without partitions, as three paternosters were installed together. Auction-ID: A7-49089-87
floor scrubber Brand: Kremer Type: KRM350 Function: Scrubbing and drying in 1 cycle Capacity: 1520m² per hour Brush diameter: 380 mm Holding tank: 35 litre holding tank Clean water tank: 30 liter clean water tank Number of motors: 2 motors Battery: 24 V / 52 Ah battery Including: battery charger available Manual: manual available Condition: Unused in the original packaging Auction-ID: A3-46152-1069
DEMAG - DC-Pro 5 - 500 H5 V1 Stock number 1039-9274 Crane system Manufacturer: DEMAG Type DC-Pro 5 - 500 H5 V1 Year of construction 2006 Country of origin Germany Technical details: Load capacity 500 kg Projection 5,000 mm Base plate 0.7 x 0.7 m Dimensions approx. 5.14 x 0.70 x 4.75 m Auction-ID: A7-49608-23
This Harley Davidson Legend Drag Softtail Custom Built comes with original documentation such as registration documents. This vehicle was completely restored and Custom built at the time. The vehicle is equipped with various expensive accessories. This work was carried out well and expertly. This Harley Davidson Legend Drag Softtail Custom Built is both technically and cosmetically in very good and well-maintained condition and has been well and expertly maintained since its construction. Valuation report available worth 27,500.00 euros Viewing by appointment Auction-ID: A1-40304-26
Well maintained, Gianelli exhausts, new tyres, LED rear light, Brembo brakes Auction-ID: A1-47414-99
Mileage: approximately 22,191 km,Weight: 204 kg,Length: 228 cm,Width: 93 cm (measured across the handlebars),Height: 144 cm (including mirrors), Auction-ID: A7-49177-3
Equipped with: 2x rear-view mirror, side supports, hard case case, Auction-ID: A1-47414-92
Can-Am Maverick Trail 800, year of construction 2021, registered as agricultural tractor, VAT vehicle Side-by-side of BRP Can-Am, model Maverick Trail 800. Year of manufacture 2021, 8712km, first registration November 2021. Belgian registration available. Technical data: • Rotax twin-cylinder, 800 cm³ petrol, 41 kW • Two seats with seat belts and mesh doors • All-wheel drive with CVT transmission • Mass in running order 640 kg, GVW 975 kg • Homologation T2b, registered as an agricultural or forestry tractor • Roll cage, roof, mirror and flashing light Condition: used, in running order. Normal signs of wear. Auction-ID: A3-46151-16463
Machine number: 2460-825Operating voltage: 400 V Frequency: 50 HzConnection: 7.5Rated current: 20 Amax. container loading: 400 kgmax. permissible average container load front: 400 kg for max. 43 containers and rear: 400 kg for max. 44 containers, max. total load: 40,000 x 20,000 kgDimensions per panelau: 2450 x 880 mmwithout contentsAttention: without partition walls, as three paternosters were installed together. Auction-ID: A7-49089-48
250 € 
