測定機 (349)

\"Precise final dimension of 100 mm made of steel with integrated magnet for secure fixation on metallic surfaces. Suitable as a reference dimension for testing, setting and comparison measurements in the workshop, measuring room and quality assurance. The final dimension is in a storage box and shows signs of wear due to age or use, which do not impair its function. • Type: Gauge block / Length-Normal • Nominal dimension: 100 mm • Material: steel • Design: magnetic • Magnet: integrated (2 magnetic surfaces visible) • Marking: \"100\" folded in • Storage: \"Plastic box\" Auction-ID: A7-46417-265

\"Test pin post 1–5 mm (4 individual sets)Richard Knauthe KG / KS SchmalkaldenTGL 13620/ICylindrical measuring pinsstep 0.05 mmTest pin post consisting of four individual sets in the range of 1.00 mm to 5.00 mm.Included are: • 1.00 – 2.00 mm • 2.00 – 3.00 mm • 3.00 – 4.00 mm • 4.00 – 5.00 mmThe first three sets are from Richard Knauthe KG, Limbach-Oberfrohna (TGL 13620/I).The 4-5 mm set is from KS Schmalkalden. Each set contains 21 pins in 0.05 mm increments.Supplied in wooden boxes or metal boxes (4–5 mm). Total measuring range: 1.00 – 5.00 mmGraduation: 0.05 mmTotal number of pins: 84 piecesStandard: TGL 13620/I (3 sets)Manufacturer: Richard Knauthe KG / KS Schmalkalden\" Auction-ID: A7-46417-290

\"Calibration gauge for tip calipers 0–500 mmCalibration gauge for tip calipers in a wooden case.The gauge is used to check and adjust tip calipers over defined test distances. Several reference dimensions are engraved on the bar. The design is made as a solid, ground steel strip with threaded holes on the sides for mounting or fixing. Engraved reference dimensions (visible):10 mm / 10.00 mm / 20.30 mm / 60.0 mm / 80.50 mm / 120.41 mm / 160.72 mm / 380.15 mmTotal length according to the tape measure approx. 500 mm. Type: Calibration gauge for tip calipersMeasuring range: up to approx. 500 mmMaterial: steel, ground Referencepoints: several engraved test distancesDesign: with threaded holes\" Auction-ID: A7-46417-334

Lot of two used gauge blocks for length testing and adjustment of measuring equipment.Included are:    •    1× Carl Zeiss Jena gauge block, TGL RGW 720/0, in plastic case    •    1× Gauge block from unknown manufacturers, in a wooden boxBoth sets are not complete, individual gauge blocks are missing.Condition:    •    u sed    •    signs of wear due to age and use Auction-ID: A7-46417-115

Standard: DIN EN ISO 3650Tolerance class: Class 1ID: 5392Condition • Used • Measuring surfaces visually good, with slight, normal traces of use • Wooden case with signs of wear and tear • Nominal dimension: 300 mm • Design: long-end dimension with through-holes • Material: steel • Tolerance class: 1 (precision measuring equipment)\" Auction-ID: A7-46417-206

\"Steel Parallel Gauge Set Grade 2, Made in USSRincompleteSet of steel gauge blocks (parallel gauge blocks) in a wooden box. Manufacturer not clearly recognizable, manufactured in the USSR. The sentence is incomplete. According to the enclosed note, several gauge blocks are missing (including 1.10 mm; 1.20 mm; 1.40 mm; 1.50 mm; 1.60 mm; 1.70 mm; 1.80 mm; 2.00 mm; 3.00 mm; 4.00 mm; 5.50 mm; 6.00 mm; 7.00 mm; 10.00 mm; 90.0 mm – without guarantee, according to the note in the lid). Existing final dimensions show signs of wear due to age and use. Wooden box with clear traces of storage and use. • Design: Steel parallel gauge blocks • Original quantity: 87 pieces • Grade: 2 • Unit of measurement: mm • Reference temperature: 20 °C • Origin: Made in USSR • Box: \"Wood\" Auction-ID: A7-46417-328

\"Large batch of measuring and testing equipment – angles, thread gauges, hair angles, scribing tools, accessoriesLots of various measuring and testing equipment from workshop stock. Included are hair angles (partly TGL, Made in GDR), precision angles, several small stop angles, thread gauges (including Whitworth 55°), feeler gauges, scribing tools, a Mitutoyo dial device (5 mN), various cutting and blade tools as well as numerous protective cases. • Hair angle with marking TGL 6163/1 – Made in GDR • Several precision angles in different sizes • Thread gauges \"Whitworth 55°\" – Made in Germany • Feeler gauge set (0.05 mm visible, among others) • Mitutoyo measuring device, type 546-113, 5 mN • Various small L-brackets (different dimensions marked) • Marking blades / cutting tools in wooden case • Some with protective cases\" Auction-ID: A7-46417-316

\"Jenoptik HOMMEL TESTER W55 roughness measuring station with Waveline WLI-20, 2x HS 300 height measuring stand, hard rock plate and accessory packageStationary roughness measuring station from Hommel-Etamic / Jenoptik from first delivery 2013 (see delivery note).The measuring station consists of a solid hard rock plate with groove (item no. 257056V01) as a low-vibration base and two HS 300 height measuring stands. One HS 300 is mounted on the granite slab, the second HS 300 stands separately behind it and is included in the scope of delivery.Components according to type plates and delivery note: • HOMMEL TESTER W55Item No. 10010488S/N 87302Year of construction 201112 VDC / 3.5 A • Waveline WLI-20 in caseItem No. 244280Year of construction 2013 • Height measuring stand HS 300Item no. 10047611 • Swivel mount for HS 300Item no. 10051140 • Column for height stand HS 300Item no. 10 ...

Delivery as pictured Auction-ID: A7-46417-131

Technical data Manufacturer: Dr. Schneider Model: WM 1 Machine Type: Measuring Microscope Magnification: 1x / 3x / 5x / 10x / 20x Measuring range X/Y: 200 / 100 mm Table size: 400 x 240 mm Max. workpiece diameter: 200 mm Max. table load: 20 kg Dimensions: 450 x 800 x 1000 mm Weight: approx. 160 kg Voltage: 230 V Power: 0.5 kW Configuration Telecentric optics Cross table Digital evaluation unit (Quadra-Chek / Heidenhain) PC with monitor Measurement Software Documentation available Note Technical data was taken from existing documentation. Machine is used for optical measurement and quality control of workpieces. Auction-ID: A1-46315-50

Content consisting of: hair angle, machine level, compass, radius gauge, refractometer, Auction-ID: A1-46315-62

Including various attachments, test block and dial gauge on tripod Auction-ID: A1-46315-63

Auction-ID: A1-46315-66

Auction-ID: A1-46315-78

Auction-ID: A1-46315-65

Auction-ID: A1-46315-64

Auction-ID: A1-46315-34

Auction-ID: A1-46315-33

Auction-ID: A1-46315-15

Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-339

Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithium rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 310 x 125 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-87

Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1320 x 400 x 190 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-135

Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-168

Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-284

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. D ...

4 UNITS/SETS OF SDM0074 PACKED TOGETHER. A SINGLE SDM0074 CORRESPONDS TO: Measuring range: 0 - 600 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 850 x 360 x 145 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0074 PACKED TOGETHER: 850 x 1440 x h145 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-158

4 UNITS/SETS OF SDM0073 PACKED TOGETHER. A SINGLE SDM0073 CORRESPONDS TO: Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0073 PACKED TOGETHER: 520 x 1040 x h110 mm - 20 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-23

Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 1320 x 400 x 190 mm; Approx. Weight: 23kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-84

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-230

4 UNITS/SETS OF SDM0074 PACKED TOGETHER. A SINGLE SDM0074 CORRESPONDS TO: Measuring range: 0 - 600 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 850 x 360 x 145 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0074 PACKED TOGETHER: 850 x 1440 x h145 mm - 60 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-81

Set composed of 32 steel gauge blocks, sizes from 1.005 mm up to 50 mm. Operating reference temperature 20°C. Standard used DIN861. With wooden box included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 130 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-139

3 UNITS/SETS OF SDM0030 PACKED TOGETHER. A SINGLE SDM0030 CORRESPONDS TO: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x SDM0030 PACKED TOGETHER: 745 x 1050 x h145 ...

Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-80

Carl Zeiss Jena ZKM 02-250 Measuring Microscope with Metronics Quadra-Chek 2000 Manufacturer: Carl Zeiss Jena / Metronics Model: ZKM 02-250 / Quadra-Chek 2000 Condition: used Description For sale: complete workstation for precision optical measurement applications (metrology / quality control), consisting of a Carl Zeiss Jena ZKM 02-250 measuring microscope with Metronics Quadra-Chek 2000 digital readout and evaluation system, as shown in the photos. This setup is suitable for dimensional inspection, geometric measurements, and optical control of small components in quality departments, toolrooms, and measuring laboratories. Travel ranges Measuring system / electronics The Metronics Quadra-Chek 2000 is a digital readout and evaluation unit used with profile projectors and measuring microscopes. Main functions include: • 2D measurements (and 2D/3D applications depending on sy ...

4 UNITS/SETS OF SDM0067 PACKED TOGETHER. A SINGLE SDM0067 CORRESPONDS TO: Precision bore gauge with two contact points, with elastic elements for centering. Lightweight and robust construction with CFRP elements for less thermal expansion and greater corrosion protection. Handle on the holder for less thermal influences. Smooth and precise transmission of the contact tip stroke via a curved segment. The different contact points with fixed hardened steel ball allow you to compose the different ⌀ to be measured. Application: For precision measurement of ⌀, roundness and cylindricity of internal bores and profiles. In wooden box. Range: 50-160 mm, Depth: 150 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. D ...

measuring stand / measuring column with digital readout LD 300. The unit is equipped with an LCD display and a measuring system based on a GIVI MISURE scale / encoder (marking visible). Suitable for height / displacement checks, part setting and general measuring work at the workstation. Key features: • Model: LD 300 • Digital readout with LCD display mounted on the column • Measuring system: GIVI MISURE scale / encoder • Design: stable base and column, manual adjustment by control knobs • Visible equipment: holder / arm for dial indicator and locating element / mounting socket on the base Application: • quick height and displacement measurements • part / tool setting • inspection work in toolroom, quality Auction-ID: A7-46285-16

Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-320

Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-197

4 UNITS/SETS OF SDM0071 PACKED TOGETHER. A SINGLE SDM0071 CORRESPONDS TO: Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0071 PACKED TOGETHER: 920 x 680 x h45 mm - 12 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-5

2 UNITS/SETS OF STR0002 PACKED TOGETHER. A SINGLE STR0002 CORRESPONDS TO: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithium rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 310 x 125 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x STR0002 PACKED TOGETHER: 370 x 620  ...

Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-278

Measuring range: 250 - 450 mm Measurement resolution: 0.01 mm Depth 1500 mm Bore gauge for high depth measurements, complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 920 x 170 x 45 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-110

2 UNITS/SETS OF STR0002 PACKED TOGETHER. A SINGLE STR0002 CORRESPONDS TO: Roughness tester for internal and external measurement in unbreakable ABS case 120 x 46 x 68 mm. 3.7 V Lithium rechargeable battery and 220V charger included. Portable roughness tester characterized by high precision, wide range of applications and ease of operation. Recommended for tests of surfaces of all types of metals and non-metals. 128 x 64 Dpi piezoelectric diamond LCD sensor. Memory of 100 groups of measurements. Including reset glass plate. Battery charge indicator. USB data output with PC cable and software included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 310 x 125 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 2x STR0002 PACKED TOGETHER: 370 x 620  ...

4 UNITS/SETS OF SDM0068 PACKED TOGETHER. A SINGLE SDM0068 CORRESPONDS TO: Measuring range: 50 - 160 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0068 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-57

4 UNITS/SETS OF SDM0070 PACKED TOGETHER. A SINGLE SDM0070 CORRESPONDS TO: Measuring range: 250 - 450 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 170 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0070 PACKED TOGETHER: 370 x 680 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-140

Set composed of 32 steel gauge blocks, sizes from 1.005 mm up to 50 mm. Operating reference temperature 20°C. Standard used DIN861. With wooden box included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 130 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-235

Measuring range: 0 - 300 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 520 x 260 x 110 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-111

4 UNITS/SETS OF SDM0069 PACKED TOGETHER. A SINGLE SDM0069 CORRESPONDS TO: Measuring range: 160 - 250 mm Measuring resolution: 0.01 mm Depth 200 mm Bore gauge complete with indicator, extensions and anvil. Machine condition: unchecked. Approx. Transport dimension: LxWxH 370 x 145 x 65 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0069 PACKED TOGETHER: 370 x 580 x h65 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-9

4 UNITS/SETS OF SDM0066 PACKED TOGETHER. A SINGLE SDM0066 CORRESPONDS TO: Set composed of 32 steel gauge blocks, sizes from 1.005 mm up to 50 mm. Operating reference temperature 20°C. Standard used DIN861. With wooden box included. Machine condition: unchecked. Approx. Transport dimension: LxWxH 220 x 130 x 70 mm; Approx. Weight: 2kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0066 PACKED TOGETHER: 220 x 520 x h70 mm - 8 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-15

Measuring range: 0 - 600 mm Measuring resolution: 0.01 mm Digital height gauge with zeroing system for comparative measurements (relative zero and negative positions) Machine condition: unchecked. Approx. Transport dimension: LxWxH 850 x 360 x 145 mm; Approx. Weight: 15kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-169