: neu : ca. 8 Wochen ab Auftragse : Italien : 9000 €: 173.7 €: 30 to: fix : 350 mm: 920 mm: 900 mm: max. 9 mm/s: 0,75 kW: 1600 mm: 700 mm: 2050 mm: 430 kgThe hydraulic movement of the piston is controlled by a handwheel,which enables very sensitive and precise positioning.One-handed operation is possible thanks to the working speed of less than 10 mm/s.Very suitable for straightening and pressing work.The cylinder can be moved sideway by handwheel (only ",M", versions)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2023 : 7295 : ca. 12 Wochen ab Auftrags : Türkei : 22750 €: 436.8 €: 150 to: fix : 1520 mm: 300 mm: 1520 mm: 610 mm: 9 mm/s: 5 mm/s: 10 mm/s: 10 mm: 600x1520 mm: 100 mm: 190 mm: 2630 mm: 1000 mm: 2450 mm: 3270 kg2 guidingsbig upper tool holder and table with t-slotsupper and lower pressbrake toolmanometerrapid down move with automtic change to working speedpiston stops in every position2 hand panel and foot pedalTisch höhenverstellbaraccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 6500 €: 125.45 €: 70 to: fix : 900 mm: 900 mm: 1700 mm: 700 mm: 2100 (PSS: 2300) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 70 TL: 1 speed 4 mm/s, single-hand control with lever € 6.500,00 PSS 70 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 7.200,00 PSS 70 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 7.900,00 PSS 70: same as PSS 70 NC but with stroke 500 mm € 8.700,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 070168 : prompt, Zwischenverkauf v : Türkei : 10900 €: 209.28 €: 1 : 150 to: horizontal verschiebbar : 300 mm: 1070 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2480 mm: 1870 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 15500 €: 297.6 €: 150 to: horizontal verschiebbar : 300 mm: 750 mm: 1570 mm: 280x200 mm: 5 mm/s: 10 mm/s: 2560 mm: 1000 mm: 2480 mm: 2350 kghorizontal movable cylinder by handwheelsteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 6-8 Wochen ab Auftrag : Italien : 5000 €: 117.73 €: 40 to: fix : 900 mm: 900 mm: 1600 mm: 700 mm: 2050 (PSS: 2250) mmThe table can be lifted with a chainHydraulic unit with motor and pumpAdjustable maximum pressureManometerEquipment compliant with CE regulations. Operating instructions in German and English.MODEL VERSIONS:PSS 40 TL: 1 speed 4 mm/s, single-hand control with lever € 5.000,00 PSS 40 L: 2 speeds 9 / 3 mm/s, single-hand control with lever € 5.800,00 PSS 40 NC: 2 speeds29 / 4 mm/s, two-hand control with lever and push button € 6.100,00 PSS 40: same as PSS 40 NC but with stroke 500 mm € 7.000,00The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 20800 €: 399.36 €: 70 to: horizontal verschiebbar : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 1050 kgHORIZONTAL MOVABLE CYLINDER550 MM2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 19500 €: 374.4 €: 70 to: fix : 500 mm: 700 mm: 900 mm: 20 mm/s: 2 mm/s: 1700 mm: 1000 mm: 2400 mm: 980 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Monate ab Auftragse : Italien : 25200 €: 481.32 €: 100 to: fix : 500 mm: 700 mm: 1050 mm: 25 mm/s: 2 mm/s: 1900 mm: 1200 mm: 2450 mm: 1300 kg2 speedscontrol by handwheel and push button (2-hand)adjustable max. pressuremanometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 14 - 16 Wochen ab Auf : Italien : 34500 €: 658.95 €: 100 to: fix : 835 mm: 500 mm: 780 mm: 1050 mm: 25 mm/s: 10 mm/s: 4 mm/s: 800 x 600 mm: 700 x 350 mm: 1800 mm: 1000 mm: 2400 mm: 2050 kgHydraulic multifunction workshop press for pressing and straightening and optional bendingVersion A (automatik): with 2-hand panel with limit micron switch for up/downstroke stop, automatic piston retraction, Siemens CPUVersion S (semiautomatik): 2-hand function by hand lever and pushbutton, limit micron switch for up/downstroke stopStandardmodel for pressing and straightening: table with t-sloats and straightening punchOPTIONS:Bending accessorie with tool holder, upper tool, dies with 4 slots and 2 frontal support armsMobile truck for quick assembly/disassembly of bending unitSiemens controlPressure switchHeat exchangerPiece counterTimerPlate supports for the rear sideSafety light guard ...
: neu : ca. 4 Monate ab Auftragse : Italien : 70000 €: 1323 €: 300 to: fix : 500 mm: 1500 mm: 20 mm/s: 2 mm/s: 2800 mm: 1500 mm: 3200 mm: 6000 kgtable with integrated cylinder to lift the workpiececontrol by levers as well as control panel (2- hand)regulable maximum pressureManometeraccording to CE regulations user manual in GERMAN and ENGLISH(sample photo)The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 6200 €: 119.66 €: 30 to: horizontal verschiebbar : 200 mm: 775 mm: 125x80 mm: 5 mm/s: 10 mm/s: 1500 mm: 700 mm: 1800 mm: 400 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7700 €: 148.61 €: 80 to: horizontal verschiebbar : 250 mm: 1040 mm: 865 mm: 200x120 mm: 5 mm/s: 10 mm/s: 1710 mm: 700 mm: 2100 mm: 835 kghorizontal adjustable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2024 : 7319 : prompt, Zwischenverkauf v : Türkei : 6900 €: 1 : 120 to: horizontal verschiebbar : 400 mm: 900 mm: 1200 mm: 5,8 mm/s: 9.5 mm/s: 1200 x 400 mm: 4 kW: 1900 mm: 1000 mm: 2450 mm: 1250 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure manometerOPTION:1 pair of V-block € 540,--The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 070179 : prompt, Zwischenverkauf v : Türkei : 19900 €: 382.08 €: 1 : 150 to: fix : 300 mm: 610 mm: 1020 mm: 9 mm/s: 5 mm/s: 10 mm/s: 600x1020 mm: 100 mm: 190 mm: 2110 mm: 1000 mm: 2470 mm: 2450 kg2 guidingsupper plate with T-slotstable plate with T-Slotsmanometerrapid down move with automtic changeto working speedpiston stops in every position2 HAND CONTROL AND FOOT PEDALtable height adjustableaccording to CE regulationsuser manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 8300 €: 160.19 €: 1 : 100 to: horizontal verschiebbar : 300 mm: 1070 mm: 5 mm/s: 10 mm/s: 2110 mm: 1000 mm: 2430 mm: 1500 kgdemo machine / mint conditionnet price (price for new machine € 9.000,00)horizontally displaceable cylinder with clamping leversteel welded framestop at any positionpressure manometersafety valve against overloading2 V-blockstable height adjustabletable up-down movement attachmentcontrol by operating leveraccording to CE regulations user manual in GERMAN and ENGLISHThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2024 : 7308 : prompt, Zwischenverkauf v : Italien : 2400 €: 1 : 10 to: fix: 150 mm: 850 mm: 520 mm: 170 kg2速手動ポンプ付きCE規則に従いユーザーマニュア 本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12120 €: 232.7 €: 160 to: horizontal verschiebbar : 400 mm: 900 mm: 1450 mm: 6,2 mm/s: 9.8 mm/s: 1450 x 450 mm: 5,5 kW: 1640 mm: 1000 mm: 2550 mm: 1300 kgwith horizontally sliding cylindermotorhydraulic with additional hand pumpHeight adjustable tableOil Pressure GaugeINCL. OPTIONAL EQUIPMENT:handwheel with locking pin for cylinder adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 300 mmtable surface area: 500 x 1520 mmcolumn travel between the guideways: 1520 mmdayligth: 680 mmpressure: max. 244 barweight of tools max.: 270 kgajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lvoltage: 400 Vtotal power requirement: 7.5 kWweight of the machine ca.: 2700 kgdimensions of the machine ca.: 2630 x 1000 x 2350 mm current new price approx. 18.000 euros special price on request according to previous owner rarely in useEquipment:- robust electro-hydraulic workshop/bending press left right guided- with fixed working cylinder- Pressing depth adjustable by cams- Height-adjustable work table- 2x locking bolts for table fixation- 3x directional control valve supply-empty-return- Stepless adjustment of working pressure- 1x freely movable 2-hand operation- Original operating instructionsThe data for this ad was crea ...
pressure: 60 tstroke: 400 mmdaylight longitudinal/sideways: 820 x 300 mmdayligth: 900 mmliter capacity: 6,5 lfeed down: 6,1 mm/secfeed up: 10 mm/secMotor output: 2,2 kWweight of the machine ca.: 0,675 tdimensions of the machine ca.: 1,46 x 0,85 x 2,1 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE markingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 400 mmdaylight longitudinal/sideways: 1010 x 300 mmMotor output: 4,0 kWliter capacity: 11,0 ldayligth: 900 mmtable surface area: 1010 x 560 mmfeed down: 4,8 mm/secfeed up: 7,5 mm/secweight of the machine ca.: 0,9 tdimensions: 1550 x 900 x 2450 mmHigh-quality hydraulic press can be operated manually or by motor.Cylinders can be moved sideways.Safety valve at cylinder end position.CE markedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 100 tstroke: 380 mmtable surface area: Arbeitsbreite 1100 mmpressure: 258 baroil volume: 46 dm³ajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 970 kgInner diameter of the cylinder [mm]: 220Piston rod diameter [mm]: 90Diameter piston crown [mm]: 120- Movable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision workThe 100 ton hydraulic press is equipped with a movable cylinder (left-right) and a height-adjustable work table. Over and beyondit has a pressure regulation, 2 speeds, a joystick anda hand pump for precision pressing.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 60 tstroke: 380 mmtable surface area: Arbeitsbreite 750 mmpressure: 259 baroil volume: 38 dm³ajustment speed: 2,87 mm/secwork speed: 9,5 mm/secreturn speed: 12 mm/sectotal power requirement: 2,2 kWweight of the machine ca.: 540 kgInner diameter of the cylinder [mm]: 170Piston rod diameter [mm]: 75Diameter piston crown [mm]: 100- Integrated pressure gauge- Pressure regulator- Hydraulic unit with 2 speeds- Working table adjustable in height- Joystick to move the piston up / downThe 60 ton workshop press has a fixed cylinder and aheight-adjustable work table (motorized). Equipped withPressure regulation, manometer, 2 speeds and a joystick for themove the piston up and down. With this joystick you can use the piston preciselymove, making this hydraulic press perfect for precision jobssuitable.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 200 tstroke: 400 mmtable surface area: Arbeitsbreite 1300 mmpressure: 243 baroil volume: 64 dm³ajustment speed: 5,73 mm/secwork speed: 1,84 mm/secreturn speed: 7,08 mm/sectotal power requirement: 3,0 kWweight of the machine ca.: 1690 kgInner diameter of the cylinder [mm]: 320Piston rod diameter [mm]: 140Diameter piston crown [mm]: 175- adjustable cylinder (left-right)- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Working table adjustable in height- Joystick to move the piston up / down- Hand pump for precision work- with digital displayThis 200 ton hydraulic press is equipped with a movable cylinder (left-right), a height-adjustable work table, a pressure regulator, 2speeds, a joystick and a hand pump for precision pressingfitted.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 350 mmtable surface area: Arbeitsbreite 750 x 260 mmpressure: 221 baroil volume: 37 dm³work speed: max. 9,8 mm/secreturn speed: 14 mm/sectotal power requirement: 3 kWweight of the machine ca.: 385 kgInner diameter of the cylinder [mm]: 130Piston rod diameter [mm]: 55Diameter piston head [mm]: 80- Integrated pressure gauge- Pressure regulator- Hydraulic unit with variable speeds- Working table adjustable in height- Joystick to control piston and speedThe workshop press (30T) has a fixed cylinder and a highadjustable work table (motorized). Equipped with pressure regulation,Pressure gauge, variable speed and a joystick to move the piston up and downto move off. With this joystick you can also control the speedadjust, making this motorized hydraulic press perfect forprecision work is suitable.The data for this ad was created with ModulMWS - the software solution of Lo ...
pressure: 100 tstroke: 380 mmtable surface area: 1740 x 996 mmpressure: 258 barajustment speed: 7,54 mm/secwork speed: 2,47 mm/secreturn speed: 9,06 mm/secdayligth: 700 mmtable height: 720 mmtotal power requirement: 2,2 kWweight of the machine ca.: 1685 kg- Manually movable portal- Movable cylinder manually (left - right)- Cylinder extension up to the table- Integrated pressure gauge- Pressure regulator- Two-speed hydraulic unit- Joystick to move the piston up / down- Hand pump for precision workThese straightening presses are equipped with a movable cylinder (on the side) and aMovable frame (longitudinal-running) equipped to allow easy access to allallow points of the surface. The design of this portal pressmakes it possible to put heavy material on the table with a crane and thatSlide the portal over the material at the beginning of the pressing process.The quality of these hydraulic s ...
pressure: 200 tstroke: 400 mmdaylight longitudinal/sideways: 1300 /450 mmdayligth: 900 mmtank capacity: 75 lliter capacity: 22 lfeed down: 6,9 mm/secfeed up: 12,6 mm/secMotor output: 7,5 kWweight of the machine ca.: 2,1 tdimensions of the machine ca.: 2,0 x 0,75 x 2,8 mPresses can be operated both by hand and by motor.Cylinders can be moved sideways.Safety valve with cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 80 tstroke: 400 mmtable surface area: 920 x 540 mmMotor output: 2,2 kWliter capacity: 9,0 ldayligth: 800 mmtank capacity: 31 ldaylight between the columns: 920 x 300 mmweight of the machine ca.: 0,725 tdimensions of the machine ca.: 1,45 x 0,85 x 2,45 mHand and Motor operated.Side-sliding cylinder.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:20 tストローク:150 mm日光:700 mm全体のサイズ:670x870x1900 mm機械の重量約:200 kg国内設備:-安定した溶接構造-ハンドレバーによる 動-圧力計による圧力計-CEマー
: 60 tostroke: 400 mmdayligth: 900 mmHeads: 150x95 mmfeed up: 5,6 mm/secfeed down: 9,4 mm/secweight of the machine ca.: 700 kgtotal power requirement: 4 kWOverall size: 1460x850x2400 mmFurther information:stable welded constructionPrinting cylinder adjustableOperation electrically via shift lever / manually via hand leverPressure display by manometerHeight of material supports adjustable by cylinderCE markThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:75 tストローク:250 mm日光縦/横方向:800 x 215 mm日光:170-885 mm使用圧力:7,5-8.5バール機械の重量約:0,45 t寸法:1,2 x 0,8 x 2,1 mm油圧/空気圧ワークショッププレスシリンダーは横 向に移動できます空気圧フットペダルテーブルの さ調整用ウインチ2個プレスブロックCEマーキン
pressure: 60 tstroke: 400 mmtable surface area: 800 x 500 mmfeed down: 4,03 mm/secfeed up: 5,82 mm/seccolumn daylight: 820 mmoil pressure max. in the work cylinder: 400 baroil volume: 26 lvoltage: 400 V / 50 Hztotal power requirement: 3 kWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 1,5 x 0,9 x 2,1 m• unused workshop press,• manual and hydraulical operation,• Pressure cylinder moveable horizontally,• Working table hydraulical adjustable,• Cylinder Ø 150 mm, piston base Ø 85 mm.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 tstroke: 400 mmdaylight longitudinal/sideways: 720 x 295 mmdayligth: 900 mmliter capacity: 6,0 lfeed down: 7,5 mm/secfeed up: 12,5 mm/secMotor output: 3,0 kWweight of the machine ca.: 0,6 tdimensions of the machine ca.: 1,35 x 0,85 x 2,2 mHigh-quality, hydraulic press can be used either by hand or by motoroperate.Cylinders can be moved sideways.Safety valve at cylinder end position.CE marking2 year guaranteeThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:25 tストローク:mmテーブル表面積:mm総電力要件:機械のkW 重量ca.:t機械の寸法ca.:mブランド:WP容量:25 T列間の距離:760 mm シリンダーとテーブル間の距離:950 mm
