生産者：
(カテゴリ： 102-118)
先端の高さ:330ミリメートル 中心幅:1500ミリメートル 循環:ベッド690ミリメートル以上 スピンドルボア:82ミリメートル スピンドルホルダー:ショートコーンサイズ8 取り付けコーンテールストック:6 MK スピンドル速度: 7.1 - 1400 rpm フィード:縦方向/フラット0.05-112 / 0.025-56 mm / U ねじピッチ:0.25 - 560ミリメートル 電気接続:380 V、15 kW 所要スペース: 3350 x 1800 x 1400 mm 重量:4800キ
turning diameter over bed: 1800 mmturning diameter over slide rest: 1450 mmturning length: 940 mmbed width: 1040 mmturning speeds: 2,35-118 U/minfaceplate diameter: 1400 mmturning dia. in gap: 2450 mmTravel: 1200 mmweight: 26 tDistance between the canter 7000mmFaceplate diameter 1400urning diameter in the offset 2450, length 940 mmTravel over support 1200Over support with autom. travelThe tech. Data are manufacturer or operatorinformation and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We ...
turning diameter over bed: 430 mmturning diameter over slide rest: 220 mmturning diameter in the gap: . mmturning length: . mmturning speeds: 12,5-1600 U/minbed width: 410 mm3-jaw chuck: 250 mmspindle passage: 550 mmcentre distance: 750 mmtotal power requirement: kWweight of the machine ca.: 2 tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamT ...
turning diameter over bed: 1450 mmturning diameter over slide rest: 1000 mmturning length: 8000 mmspindle bore: 160 mmturning speeds: 2,8-560 U/minfaceplate: 1400 mm3-jaw chuck: mmbed width: 850 mmturning diameter in the gap: 1800 mmlength of gap: 600 mmsteady: 1070 mmsteady: 1070 mmsteady: 650 mmRapid travel: chip conveyor: kWdigital readout: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact ...
turning diameter over bed: 1000 mmturning diameter over slide rest: 760 mmturning length: 6000 mmspindle bore: 82 mmturning speeds: 4,5-900 U/minfaceplate: 1000 mm3-jaw chuck: 500 mmsteady: rapid traverse: total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsc ...
turning diameter over bed: 840 mmturning diameter over slide rest: 640 mmturning length: 3300 mmspindle bore: 74 mmturning speeds: 7,1-1400 U/min3-jaw chuck: 315 mmsteady: rapid traverse: turning dia. in gap: 920 mmlength of gap: 370 mmtotal power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 8x2x1,8 mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward t ...
turning diameter over bed: 1250 mmturning diameter over slide rest: 1250 mmturning length: 9000 mmfaceplate: 1300 mm3-jaw chuck: 500 mmcentre distance: 10.000 mmbed width: 850 mmturning dia. in gap: 1600 mmsteady: 810 mmsteady: 410 mmsteady: 470 mmtotal power requirement: 54 kWweight of the machine ca.: 33 tdimensions of the machine ca.: mMultifix steel holder with insertsThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forwar ...
turning diameter over bed: 455 mmturning diameter over slide rest: 285 mmturning length: 1.000 mmcenter height over bed: 225 mmcentre distance: 1.000 mmdigital readout: 2-Achsen ANILAMbed width: 330 mmspindle taper: KK 6 DIN 55027spindle bore: 45 mmturning speed range: 16 - 1.000 U/minpower requirement: 3,0 / 4,2 kWtaper in tailstock-quill: MK 4 dia. of quill: 62 mmquill stroke: 145 mmcoolant: voltage: 400 Vtotal power requirement: 4,5 kWweight of the machine ca.: 1,95 tdimensions of the machine ca.: 2,45 x 1,10 x 1,80 m- Serial-No.: 29-2561- ANILAM 2-axis digital readout- 4-jaw tool holder- coolant equipmentATTENTION!Machine is sold without a chuck.Upon request and for an additional charge,the following 3-jaw spiral chuckscan be included:- CENTER Ø 200 mm = 780.00 EUR- CENTER Ø 250 mm = 1,030.00 EURThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...
turning diameter over bed: 540 mmturning diameter over slide rest: 270 mmturning length: 2500 mmspindle passage: 60 mmturning speeds: 600 U/minRapid travel: steady for max. workpiece diameter from: 270 mmsteady for max. workpiece diameter from: 170 mmfaceplate: mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 47No. 171The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to yo ...
turning diameter over bed: 600 mmturning diameter over slide rest: 360 mmturning length: 2250 mmspindle bore: 63 mmfaceplate: 500 mmturning speeds: 11,2-2000 U/minbed width: 350 mm3-jaw chuck: 300 mmsteady: 160 mmRapid travel: total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mThe tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for this a ...
turning diameter over bed: 520 mmturning diameter over slide rest: 340 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 33,5-1600 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 68The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for t ...
turning diameter over bed: 440 mmturning diameter over slide rest: 240 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 18-1600 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 65The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...
turning diameter over bed: 460 mmturning diameter over slide rest: 290 mmturning length: 1000 mmspindle bore: 55 mmfaceplate: 400 mmturning speeds: 50-1250 U/mindigital readout: Haidenhain bed width: 340 mm3-jaw chuck: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNo. 64The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively.About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit.Your Markus Hirsch TeamThe data for thi ...
: gefült mit 43 Aufnahmen height: 2.200 mmwidth: 1.200 mmweight of the machine ca.: 300 kg: Please note:The machine is dismantled and ready for loading. It is not possible to show it under power or make a video.Our offer includes already the best pictures. So we don’t have and won’t send additional pictures.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 1000 mmturning diameter: 330 mmturning dia. over face-slide: 198 mmturning dia. in gap: 476 mmspindle bore: 38.0 mmturning speeds: 70 - 2000 U/minbed width: 180 mmspindle taper: DIN ISO 702-2 Nr. 4taper in tailstock: 3 MKquill travel: 110 mmtotal power requirement: 1.5 kWweight of the machine ca.: ca. 610 kg.range L-W-H: 1930 x 755 x 1300 mmFeatures- Ideal for technical schools, repair shops, and training workshops- Modern main spindle bearing assembly with precision-grade angular contact ball bearings- Single-lever chuck for the tailstock, adjustable for taper turning- Hardened and ground gears and shafts in the gearhead- Optimally suited for machining steel, non-ferrous materials, and plastics- Removable bridge for machining workpieces with large. diameters- To minimize the effects of vibration, the solid prismatic bed. is additionally equipped with ribs- The speed and ...
turning length: 1000 mmturning diameter: 210 mmswing diameter over bed slide: 300 mmcentre height: 167 mmspindle bore: 40 mmbed width: 210 mmturning speeds: 40 - 2500 U/mintotal power requirement: - kWweight of the machine ca.: 1000 kg.range L-W-H: 2000 x 1000 x 1700 mmFeatures:- Digital display- 3-jaw chuck- Chuck guard- Multifix quick-change tool holder- Chip deflector- Chuck guard- Coolant system- Bed stop- Instruction manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe (LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck ...
turning length: 450 mmturning diameter over bed: 245 mmturning diameter over slide rest: 135 mmspindle bore: 23.0 mmtool adaptor: DIN 55021-4 quill:: 2 MKquill travel: 80.0 mmturning speeds: 60 - 3000 U/minbed width: 155 mmtotal power requirement: 1.2 / 1.5 kWvoltage: 380 Vweight of the machine ca.: 340 kg.range L-W-H: 1200 x 650 x 1330 mm from a vocational school (!) particularly suitable for precision turned partsThe Primus series is the most compact precision sliding headstock and sliding headstock lathe(LZ) from WEILER. It is used in toolmaking, laboratories and training workshops as an absolute machine for precise work in the tightest of spaces.The machine is built for extremely tight tolerances.The hardened and ground machine bed ensures maximumfor maximum vibration damping and durability.Features:- Robust lead/traction spindle lathe- 2-axis digital readout D60-2V- three-jaw chuck- ...
turning diameter: 360 mmturning length: 1000 mmswing diameter over bed slide: 360 mmcentre height: 180 mmturning speeds: 70-2400 U/mintotal power requirement: 2,2 kWweight of the machine ca.: 680 kgdimensions of the machine ca.: 2000x1500x900 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 500 mmturning diameter over bed: 297 mmturning diameter over slide rest: 160 mmspindle bore: 36.0 mmtool adaptor: DIN 55022 Gr. 5quill:: 3 MKquill travel: 90.0 mmturning speeds: 30 - 3550 U/minmotor speeds:: 1410 / 2830 U/mintotal power requirement: 3.3 kWvoltage: 380 Vweight of the machine ca.: 620 kg.range L-W-H: 1420 x 700 x 1200 mm from a vocational school - in very good condition () particularly suitable for medium-precision turned parts Features:- Robust lead/feed screw lathe- RÖHM three-jaw chuck Ø 160 mm- Foldable lathe chuck guard- Chuck key- MULTIFIX steel holder A, with 3x new inserts- Movable tailstock- Swiveling machine light- Control panel, front left- Automatic feeds for face and upper support- Machine base, with cabinet door (storage space)- Chip splash guard rear panel- Emergency stop button- Operating instructionsThe data for this ad was created with M ...
: 0330 mm: 210 mm: 1000 mm: 167 mm: 40 mm: 2,2 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 350 mmturning diameter over slide rest: 216 mmturning length: 1000 mmturning diameter in the gap: 550 mmturning speeds: 40 - 1800 U/mincentre height: 170 mmspindle bore: 40 mmtotal power requirement: 4,0 KWweight of the machine ca.: 0,7 tdimensions of the machine ca.: 2,0 x 0,85 x 1,6 mCentre lathe (lead screw and feed rod)- Digital readout- 3-jaw chuck (160 mm)- Spare jaws- Coolant system- Multifix tool post- 4 Multifix tool holders- Steady rest- Live centre- Chip tray- Chuck guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 480 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: - mmturning speeds: 90 - 1120 U/mincentre height: 240 mmspindle bore: 52 mmtotal power requirement: 7,5 KWweight of the machine ca.: 2,3 tdimensions of the machine ca.: 3,0 x 1,3 x 1,5 mEngine Lathe- 3-jaw chuck (200 mm)- Quick-change tool post- Steady rest- Machine lamp- Chip tray- Center pointThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 500 mmturning diameter over slide rest: 330 mmturning diameter in the gap: 600 mmturning length: 3000 mmbed width: 505 mmspindle bore: 72 mmspindle head: DIN 55022 Gr. 8taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/minpower requirement: 18,5 kWdimensions: 5,3 x 1,75 x 1,53 mweight of the machine ca.: 5,2 tused lathe in nice condition with digital scale- 2 axis digital scale- 4 jaw chuck Ø 250 mm- 3 jaw chuck Ø 260 mm- Multifix C toolholder system- some toolholders- steadyThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 390 mmturning diameter over slide rest: 190 mmturning length: 1000 mmturning dia. in gap: 460 mmspindle head: DIN 55026 Gr. 6spindle bore: 52 mmturning speed range: 11,2 - 2240 U/minpower requirement: 7,5 kWbed width: 355 mmdimensions: 2,8 x 1,3 x 1,6 mweight of the machine ca.: 1,9 tEquipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jawsThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: mmturning diameter over slide rest: mmturning length: mmtotal power requirement: kWweight of the machine ca.: trequired space: mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0560 mm: 390 mm: 2000 mm: 280 mm: 80 mm: 11,25 kWspindle turning speed - stepless: 20-2000 U/minspindle taper: K 8 DIN 55027 0The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 2,25/3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0360 mm: 215 mm: 1000 mm: 180 mm: 42 mm: 3,75 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ベッドでの旋回直径:340mm スライドレストでの旋回直径:177mm 回転長:630mm、スピンドル回転速度:無段差:55-3000 U/機械の最小重量約1.55 機械の寸法 約2×1×1.6 mデジタル表示 HEIDENHAINMisc.accessorieswww.marcels-maschinen.ch この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
turning diameter over bed: 297 mmturning diameter over bed slide: 160 turning length: 500 mmshort taper holder: Größe 5 spindle bore: 36 mmspindle turning speed range: 30-3550 U/minnumber of speeds: 18 quill adjustment: 90 mmtailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mmtotal power requirement: kWweight of the machine ca.: 610 kgdimensions of the machine ca.: 1,4 x 0,7 x 1,2 mwedge bar chuck Forkardt: Ø 160 mmAccessories:Forkardt V-block chuck, Ø 160 mmCollet chuck,Collets,Steel Multifix system, size Awith 3 quick-change insertsIntegrated center pointChip guardThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
greates pass round over bed: 350 mmswing diameter over face slide: 200 mmcentre distance: 800 mmcentre height: 175 mmturning length: 700 mm3-jaw chuck: Röhm Ø 160 spindle bore: 46 mmspindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/mintailstock quill taper MT: 3 weight of the machine ca.: 1000 kg3-axis digital readoutmanual includedThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 400 mmturning diameter over slide rest: 260 mmturning length: 1500 mmturning diameter in the gap: 570 mmturning speeds: 45 - 1800 U/mincentre height: 210 mmspindle bore: 52 mmtailstock quill taper MT: 4 MKconnected load frequency: 400 Vtotal power requirement: 3,5 kWweight of the machine ca.: 1,5 tdimensions of the machine ca.: 2,6 x 1,1 x 1,7 mProfessional industrial machinedigital display3-jaw chuck 200 mm.4-jaw chuck 200 mm.Faceplate 280mmBezel fixedBezel rotatingMultifix steel holder.Machine lightFoot brakeremovable chip tray, chip protection wallHardened and ground bed railsComplete coolant systemFeed protectionMachine feetMachine toolThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0330 mm: 210 mm: 0635 mm: 167 mm: 40 mm: 2,2 kWspindle turning speed - stepless: 30-3000 U/minThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ベッドでの旋回直径:430 mm スライドレスト越しの旋回直径:230 mm 旋回長:1000 mm 中心高さ:215 mm 中心距離:1000 mm スピンドルボア:56 mm 回転速度範囲:19 - 2000 U/min 総動力要求:7.5 kW 機械の重量約:1.9 サイズ L×W x H:2.78 x 1.25 x 1.40 mアクセサリー:3つこチャック 250 mmø 4ポスツールポスト、堅牢安定この広告のデータはLog oTech oHGのソフトウェアソリューションであるModulMWSで作 されました
greates pass round over bed: 540 mmswing diameter over face slide: 370 mmcentre distance: 3000 mmcentre height: 270 mmturning dia. in gap: 815 mmbed width: 344 mmspindle bore: 88 mmspindle diameter in front bearing: 133 mmspindle taper: 11 D1 Camlock turning speed range: 18-1400 U/minturning speeds: 16 3-jaw chuck: Röhm Ø 315 longitudinal feeds:: 0,06-1,0 mmface feeds: 0,03-0,5 mmmetric threading: 0,4-14 mminch threading: 2-72 G/1thread - module: 0,3-3,5 mmthread - DP: 8-60 Pitchtailstock quill diameter: 75 mmquill stroke: 230 mmtaper of tail spindle: MK 5 slide valve travel: 280 mmupper head travel: 150 mmOverall size: ca. 4700 x 1100 x 1400 mmweight: ca. 3200 kgpower capacity: 9,4 kWAccessories:3-axis digital display FagorRöhm wedge bar chuck Ø 315 mmMultifix steel holder size Cincl. 6 interchangeable cassettesRotating center pointTurning chuck guardRear chip guardCoolant deviceWor ...
turning diameter over bed: 400 - 900 mmturning diameter over slide rest: ? mmturning length: 1000 - 1500 mmtotal power requirement: ? kWweight of the machine ca.: tdimensions of the machine ca.: mFree at short notice due to current company resolutionIn use until the endUntested, wear and tear due to age and useMachine package 5 x lathe2 x CAZENEUVE HB 5001 x WEISSER Junior1 x SCHAERER UD 630 x 15001 x ERNAULT SOMUA HN 500The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 370 mmturning diameter over slide rest: 200 mmturning length: 1000 mmcentre height: 185 mmspindle bore: 56 mmtailstock quill taper MT: 4 turning speeds: 50 - 2000 U/minpower capacity: 4,0 kWweight of the machine ca.: 1,4 tdimensions of the machine ca.: 2,3 x 1,1 x 1,3 mCenter lathe200mm three-jaw chuckSize B Multifix tool post3 Multifix tool holdersEmergency stop deviceThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0350 mm: 196 mm: 0650 mm: 170 mm: 42 mm: 7,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ベッド上の旋削径: 500 mmスライドレスト上の旋削径: 320 mm旋削長さ: 2100 mm中心高さ: 250 mm: mmスピンドルボア: 60 mmスピンドル回転速度範囲: 11 - 2000 U/min総電力要件: 7,0 kW機械重量 約: 2,9 t機械寸法 約: 4,3 x 1,2 x 1,3 mm旋盤付き:- 4ポジションツールポスト - 3爪チャック 315mm - センタリングポイントこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
turning diameter over bed: 800 mmturning diameter over slide rest: 540 mmturning length: 4000 mmcentre height: 400 mmcentre distance: 4000 mmspindle turning speed range: 9 - 1140 U/minweight of the machine ca.: 8,0 t- with gap with insert - Accessories: 3-jaw chuck FORKARDT 400 mmø, 4-jaw chuck 500 mmø, faceplate 800 mmø, DRO on X-and Z-axis ACU-RITE, MULTIFIX-head with various inserts, 2 solid steadies, 1 running steady, running center, coolantThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
ベッド上の旋削径: 460 mm旋削長さ: 1250 mm中心高さ: 230 mm中心距離: 1250 mmスピンドル回転速度範囲: 35 - 1800 U/機械の最小重量 ca.: 2.7 t付属品: 3爪チャック 250 mmø, 3つのインサート付きMULTIFIXヘッド, ソリッドステディこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
ベッド上の回転直径: 360 mmスライドレスト上の回転直径: 180 mm回転長さ: 900 mm回転速度範囲: 25 - 1600 U/min総電力要件: 約3 kW機械の重量 約:1.5 t機械の寸法 約:2.5 x 1 x 1.5 mこの広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
: 0554 mm: 370 mm: 2000 mm: 280 mm: 104 mm: 11 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 0390 mm: 240 mm: 1250 mm: 190 mm: 54 mm: 5,5 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning length: 2000 mmcentre height: 330 mmswing diameter over bed slide: 660 mmswing diameter over slide rest: 460 mmturning dia. in gap: 900 mmspindle bore: 105 mmturning speeds: 25 - 1600 U/minbed width: 400 mmspindle taper: 55029 D 1-8taper in tailstock: 5 MKquill travel: 235 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2900 kg.range L-W-H: 3630 x 1200 x 1520 mmScope of delivery :- 3-axis digital display ES-12 V with LCD display- Slip clutch- Rapid traverse longitudinally and flatly- LED machine light- 3-jaw chuck PS3-315 mm / D8- Clamping disk 450 mm- Fixed bezel - Passage diam. max. 180 mm- Revolving bezel - Passage diam. max. 120mm- 2 centering points- Motor with magnetic brake according to CE standards- Foot pedal with braking function according to CE- Initial filling with Shell Tellus 46- Coolant device- Quick-change tool holder with 4 inserts- Protective device ...
turning length: 750 mmturning diameter: 310 mmturning diameter over slide rest: 175 mmspindle bore: 32,0 mmtailstock quill taper MT: 3 MKturning speeds: 85 - 2200 U/minbed width: 200 mmtotal power requirement: 2.2 kWweight of the machine ca.: 710 kgrange L-W-H: 1884 x 717 x 1262 mm New price ~ 23.000 euros from a training workshop ()Furnishing:- Spindle speed continuously adjustable in 2x switching stages- TOS 3-jaw lathe chuck Ø 160 mm, with spare jaws & chuck key- NEWALL digital display, front left- MULTIFIX steel holder with inserts- Movable tailstock- live center, incl. quick-action drill chuck- digital speed display- Change gears- Foot/spindle brake all technical data:- Turning diameter over bed 310 mm- Distance between centers 750 mm- Spindle bore 32 mm- Turning diameter over cross slide 175 mm- bed width 200 mm- Spindle mount / DIN55027 5- Spindle taper 4.5 M- Spindle speed infin ...
turning length: 600 mmturning diameter over bed: 360 mmturning diameter over slide rest: 190 mmbed width: 295 mmnumber of spindle speeds: 45 - 2240 U/min.spindle bore: 33,0 mmtailstock quill taper MT: MK 3 feed: Längs 0,02-0,8 mm/Ufeed: Quer 0,0125-0,5 mm/Utotal power requirement: 5,5 kWweight of the machine ca.: 1900 kgrange L-W-H: 2050 x 950 x 1280 mm Refurbished and repainted in 2013 Costs around 16.000 eurosFurnishing:- WNW NILES 3-jaw chuck Ø 200 mm- Multifix steel holder size B with inserts- revolving center points- chuck key- Movable tailstock- Operation manualThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 600 mmturning diameter over slide rest: 400 mmturning length: 1000 mmturning diameter in the gap: 850 mmturning speeds: 15 - 810 U/mincentre height: 300 mmspindle bore: 56 mmtotal power requirement: 9,0 KWweight of the machine ca.: 2,9 tdimensions of the machine ca.: 2,8 x 1,45 x 1,65 mCenter lathe- Forkardt 3-jaw chuck F 315- Single-jaw tool post- Steady rest- Live center- Chuck guard, limit switch monitored- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 410 mmturning diameter over slide rest: 260 mmturning length: 1000 mmturning diameter in the gap: mmturning speeds: 40 - 2000 U/mincentre height: 205 mmspindle bore: 50 mmtotal power requirement: 4,5 KWweight of the machine ca.: 1,6 tdimensions of the machine ca.: 2,4 x 1,3 x 1,5 mLeadscrew lathe- with copying device- 200mm 3-jaw chuck- 2x Multifix quick-change tool holders- Live center- Machine light- Chip trayThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
