WEINIG Powermat 500 mit Nutentisch 4面の平面機械

Number of spindles: 5 St.
Working width: 230 mm
Working height: 120 mm
Length of the planing table: 2500 mm
Feed motor: 4 kW
Feed speed: 5-30 m/min.
control: Memory-Funktion
Weinig Powermat 500 with grooved table
----------------------------------
The machine arrives at the warehouse and is cleaned and fully inspected.
Brief Summary:
----------------------------------
- 5 Spindles
- 8,000 rpm
- Grooved table for short or difficult-to-guide workpieces, coated
with Marathon PowerCoating
- One driven roller in the outfeed table, hardened: 210 mm wide
- Left and top spindles controlled for width and height
- Quick-release spindle nut
Detailed Description:
-----------------------------------------------------------------------
Technical Data:
Working width: 20-230 mm
Working height: 8-120 mm
Number of spindles: 5
1st Spindle - bottom
-----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 8,000 rpm
Tool circle: 125-180 mm
Tool circle for rebate cutter: 130-160 mm
Travel Axial: 17 mm
Folding attachment
MarathonCoatin for table insert in front of 1st lower tool holder
2nd Spindle - right
-----------------------------------------------
Motor with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 8,000 rpm
Tool swing diameter: 93 - 200 mm
Max. groove depth: 35 mm
Axially travel: 80 mm
Radial travel:
Min. tool diameter at stop level: 93 mm
Max. tool diameter behind stop level: 200 mm
3rd Spindle - left
-----------------------------------------------
Motor with brake: 7.5 kW
Spindle diameter: 40 mm
Speed: 8,000 rpm
Tool swing diameter: 93 - 200 mm
Tool swing diameter for straight cutter heads: max. 163 mm
Max. Groove depth: 35 mm
Axially travel: 55 mm
Pressure shoe in front of left spindle, including 2 lateral
pressure rollers, spring-loaded
Spindle radially CNC-controlled
4th Spindle - top
-----------------------------------------------
Motor with brake: 11.0 kW
Spindle diameter: 40 mm
Speed: 8,000 rpm
Tool swing diameter: 93 - 200 mm
Maximum tool swing diameter for straight cutter heads: 180 mm
Maximum groove depth: 35 mm
Axially travel: 40 mm
Spindle radially CNC-controlled
Split pressure shoe in front of upper tool holder, adjustable to the
tool swing diameter and pivoting away from the tool, spring-loaded.
5. Spindle - Lower
-----------------------------------------------
Motor with brake: 5.5 kW
Spindle diameter: 40 mm
Speed: 8,000 rpm
Tool swing diameter: 93 - 225 mm
Max. throat depth: 15 mm
Axially travel: 35 mm
Radial travel:
Min. tool diameter to table level: 93 mm
Max. tool diameter 6 mm below table level: 225 mm
Feed system
-----------------------------------------------
Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min
Infeed roller in front of the first lower tool, pneumatically controlled up/down.
Durofer pointed tooth rollers with depth limiter and self-cleaning.
Feed roller adjustment travel relative to the left tool holder, axial 35 mm
Reduced roller spacing relative to the right tool
Machine electrical system
-----------------------------------------------
Operating voltage 400 V (voltage range 380 - 420 V), 50 Hz.
Machine stand, tables, and stops
-----------------------------------------------
Infeed table: 2500 mm long (including jointing guide)
Slotted guide for short or difficult-to-guide workpieces, coated
with Marathon PowerCoating. Table tops are not removable. Includes
Insert rail for transporting narrow workpieces on the slotted guide.
(Minimum working width 25 mm, maximum chip removal on the first lower spindle 7 mm)
Manual lubricant pump for removing resin from the groove guide, including lubricant
One driven, hardened roller in the outfeed table: 210 mm wide
Pressure elements and guides
-----------------------------------------------
Spring-loaded pressure rollers from above
Machine operation
-----------------------------------------------
Control: Memory function
For saving the setting values ??of profiles.
Tool holder axes with electronic digital displays.
Function:
Saving the setting values ??of the machined profile at the touch of a button
under a profile number.
When the profile number is selected again, the electronic dual displays show
the setting values.
By manually adjusting the tool holders, the displays are brought into
conformity. 99 memory locations.
Basic equipment for installing CNC-controlled adjustment and positioning
2 x radial CNC-controlled adjustment and positioning of the tool holders
in conjunction with the memory function for tool holders 3, 4
CNC-controlled adjustment and positioning of the feed (up/down) in
conjunction with the memory function
Central position of lubrication points on the front of the machine.
Safety and noise reduction
-----------------------------------------------
Full safety enclosure
Includes existing tools
(Technical specifications according to the manufacturer - without guarantee!)
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.