Overview Single-module tunnel warmer by TMCI Padovan (SAP-Blendtech),
built in 2023 for filled beverage cans. The machine brings cold-filled
cans from 5 °C to 25 °C with a 40 °C water spray over a treatment
surface of 9 m², at an output of 35,000 cans per hour. It was
configured for 0.33 l and 0.15 l cans. The tunnel body, frame and
pipework are stainless steel. The machine is steam-heated, with a
multi-tubular heat exchanger for condensate recovery, and a Siemens
PLC with teleservice and a touchscreen HMI runs the process. The
machine is currently installed and was seen in operation. Technical
details Year of manufacture: 2023 Output: 35,000 cans/h Can sizes:
0.33 l and 0.15 l, diameter 58.4 mm and 53.3 mm Treatment surface: 9
m², single deck, 1 module Treatment time: min. 4.5 minutes Product
temperature: 5 °C inlet, 25 °C outlet Spray water temperature: 40
°C Steam consumption: approx. 508 kg/h at 3 bar Make-up water:
approx. 1 m³/h Instrument air: approx. 500 Nl/h at 6 bar Installed
power: 9 kW Electrical supply: 400 V, 50 Hz Conveyor height: 1,200 mm
± 30 mm Footprint: approx. 6,300 mm long, 2,450 mm wide (3,030 mm
including side piping) Height: approx. 1,800 mm Service clearance: 800
mm around the machine Connections: water inlet 15-20 °C max. 2 bar,
steam 3 bar, air 1/2 at 6 bar, basin overflow DN 100, basin drain 1
1/2 BSP Equipment Single-deck tunnel warmer, 9 m², 1 module
Multi-tubular heat exchanger for condensate recovery 1.1 kW blower for
water recovery Tank with condensate booster pump Air conditioning unit
Active infeed and outfeed conveyor Side inspection windows on the
spray zone Siemens PLC with teleservice, touchscreen HMI with process
overview Profinet port, cycle pause and auxiliary start buttons,
emergency stop, main switch, signal tower Condition and availability
Built in 2023, currently installed and in operation Layout drawing
available Availability on request Location: Albania
ドイツ
