CNC-STEP T-Rex N-0615 CNCポータルフライス盤

CNC portal fraese and 3D engraving machine T-Rex 0712:

equipment / product data of cnc-Fraesen Type High-Z/TRex series:

Drive: 3 busiest brand stepper motors with 4.5 amperes.
Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis!

linear guides on all Y axes from HIWIN / THK !
Multiple ball-bearing ball thread spindles on all axes, brand make!
Rapid speed max. approx. 17,000 mm/min

working speed max. approx. 12,000 mm/min

Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm

reverse play maximum approx. +/- 10microns (0.010 mm)

Point repeatability: approx. 0.01 mm

clamping area of the groove plate / T-slot table: 1650 x 880 mm

travel distances: X=1200mm; Y=700mm; Z= 130 mm

contact
contact
sensors / reference switches / limit switches on all axes

Double secured emergency release
energy chains for clean cable handling

total mass with motors : LxWxH approx. 1960 x 1300 x 1420 mm

Fraesmotor holder Euroneck 43mm

Fraesmotor 1.05 kw / 1050 FME-1 5,000-25,000 rpm with 8mm collet chuck (optional 3mm, 6mm, 10mm and zoellige)

incl. software WIN-PCNC USB (optional WINPC NC Profi) and

CAD/CAM Software ConstruCAM-3D ( Full version incl. postprocessor for WIN PCNC)

weight approx. 350 kg

Complete machine incl. 5 channel control 5 x 3.5 amps, T-slot plate, wear plate, radio remote control; Software ConstruCAM-3D, WIN PCNC USB and Kress Fraesmotor 1050 Watt with 8mm collet !

A briefing at pick-up, unlimited telephone support as well as our live support or remote maintenance via Teamviewer on lifespan are always included in the price of the complete unit.

A briefing with installation of the software on your brought computer as well as an enactment of the most important basic concepts for ConstruCAM-3D, WIN PCNC, Corel Draw etc. are also possible and of course free of charge
.
technical data are also available. Control, matched to the CNC Fraese TRex:

5-channel stepper motor CNC control with latest SMD technology

grid voltage 115 - 240 volts / 47 - 63 Hz.

strang current 5 x 3.5 ampere

micro-step control resolution 1/10-step / 2000 steps/umdr. for maximum smoothness

5 connections for 5 busiest motors / stepper motors

connection at the parallel port with software WIN PCNC Light, Economy or via USB with WIN PCNC USB or Profi. (Of all can also be used via MACH3, USBCNC, NC-Easy as well as for LINUX EMC and LINUX CNC and many others.)

Sleep function for power reduction

oscillation motor connection 24 volts can be controlled via PWM (e.g. tangential meter) or optionally 24 volts constant for holding brake via the ST connection

Control of 2 end users up to approx. 1200 watts can be switched via software (from WIN PCNC Light), 230 volts, max. 6.0 A per socket (e.g. compressor, cooling). Both sockets are secured separately.

0 - 10 volts for connecting a frequency inverter for RF/high-frequency spindle

12 status LEDs for operating status and all important functions (power, Toggle, Move, X, Y, Z, C; Overheating, Emergency Stop, Relay: Spindle/Cooling, Short Circuit)

Connection of a total of 4 end or reference switches as well as an emergency switch

Connection motors and control line via D-Sub 9-pol. (C-axis 15-pin.)

Emergency stop button

over heating protection

short-circuit-proof; ready for use
the ce-compliant commissioning of our CNC machines requires the installation of the protective enclosure and the suction nozzle.