プレス 中古 販売のため (319)

2 heated plates, table size 1300 x 2500 mm Auction-ID: A7-46472-11

Defects: air leakage (upper frame); incomplete cycle; oil leakage on hydraulic cylinders; machine not operated for ~6 years; further faults possible; sold for repair/parts Auction-ID: A7-40553-25

Auction-ID: A1-45502-5

Still in operation, a maximum of 10 operating hours can be added Here is the compact overview of the most important technical data for the mütek MPP 80: FeatureSpecificationThroughputup to 80 kg/h (depending on material) Briquette diameter80 mm (standard) Engine power5.5 kW (hydraulic drive) Silo volumeapprox. 1.0 m³ (standard with agitator) Material moisturemax. 18 % Atro Material size< 20 mm (granules/chips) Dimensions (LxWxH)approx. 1,850 x 1,450 x 1,450 mm Weightapprox. 850 kg Power connection 400 V / 50 Hz / 3 phases Special feature: The machine has an oil shortage switch as standard to protect the hydraulic pump when the oil level is too low. Auction-ID: A1-46501-519

Auction-ID: A3-43525-5100

According to photos, without tools, weight estimated Auction-ID: A1-45666-2

能力:250トンV?リングの名目力:30 - 125トン 対ラムの名目力:30 - 125トン ラムストローク:67mm テーブル表面積:560 x 600 mm スライド面積:560 x 560 ストローク数:80 s.p.m.機械の重量:約14,000 kg

According to photos, without tools in the press, these are still being removed, machine is running and is on power Auction-ID: A1-45666-1

According to photos, machine is no longer connected to the power and the liquids are emptied for transport. Documents are available electronically Auction-ID: A1-45666-5

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-52

Stamp size 4x 120x150cm. Press height 88cm. Includes scissor lift table movable with rails dimensions lxw approximately 141x103.5cm extendable to 300cm, height adjustable rear output roller conveyor dimensions lxw approximately 480x180cm, 2 parts 2-way pneumatic roller conveyor dimensions total lxbxh 500x103x92cm. The required surface area is approximately 600x570cm. Includes air and power reel. Auction-ID: A1-41994-5

プレート寸法:2200 x 1100 mm 日光開口:350 mm 日光数:1 St. 暖房:elektrisch 比圧:kg/cm² 総圧力:65 to モーター出力:1.1 kD 想像(L/W/H):2540 x 1280 x 1900 mm 機械の重量 約:2500 kg 年式:年式:本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

work piece width: max ~ 100 mmworkpiece height: max ~ 100 mmcycle time: 4 secMitre jointing machine Himmel type HF120 for precise and firm gluing of mitre joints in wooden frames, glazing bars and battens with white glue. The machine enables a fast setting time thanks to high-frequency technology, pneumatic pressing mechanisms and exact alignment of the workpieces. Ideal for furniture and picture frame construction.The glue must be applied manually as the machine does not have a glue container.Operation: Foot switchPossible angles: 90°, 120°, 135°Machine without functionThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

プレス圧:最大104 トワーキング長:3.090 mm作業幅:4 x 240 mm。ベニヤ成形、木材の接着、その他のプレス作業� �は、ソリッド油圧モールディングまたはビームプレ ス Wemhöner タイプ VS 4 S。プレスには4つの独立制御可能なプレス面があり� �す。分解および積み込みも含まれます。固定積み込 み日:2026年6月15日。グルースプレッダーも利用可能� �す。この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

作業幅:350 mm、作業長:5.100 mm 中空:210 mm木材、梁、その他のプレス作業用のソリッド油圧� �ームプレス Bürkle type HS 1/90 35/510。機能のない加熱板。新品同様の交換シリンダ� ��も含まれます。この広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され� �した�

作業幅:750 mm 作業長:3,000 mm 長さ:~ 3.850 mm 幅:~1.000 mm 高さ:~ 2,000 mm 油圧ベニヤプレス Ott タイプ 300 K75 ベニヤ、木材、梁、その他のプレス作業の接着用。� ��能のない加熱板。この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-317

Heavy series pellet mill, 380 volt power supply, hourly output 100 kg, never used Overall dimensions: 1200 x 800 x 800 mm Weight: 100 kg Auction-ID: A7-45833-198

長さ:2.800 mm、幅:600 mm、高さ:1.800 mm プレスシリンダー数:6 Stk.work 最大高さ:約1,000 mmプレスシリンダーの柔軟な配置のための穴あきプ� �ートを備えたソリッド空気圧接着プレス。圧力シュ ーなしのシリンダー1本。この広告のデータは、LogoTe ch oHGのソフトウェアソリューションであるModulMWSで作� �されました�

幅:3.000 mm高さ:1.900mm 長さ:800mm 空気圧接着プレス FEDERHENN MASCHINEN タイプ99.98 墓十字架の最終組み立て用機器付き。プレスはモジ� ��ール式で移動可能で、さまざまなプレス作業に変� �可能です。この広告のデータは、LogoTech oHGのソフトウェアソリューションであるModulMWSで作� �されました�

Dimensions (L/W/H): 2920x980x1450 mmWeight: 1500 kgTotal power requirement: 11,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1400x2450x2800 mmTotal pressure: 400 toweight of the machine ca.: 12000 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1550x2950 mmWeight: 4000 kgTotal power requirement: 1,6 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2960x1500x2000 mmWeight: 4000 kgTotal power requirement: 19,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3940x1620x2130 mmWeight: 5760 kgTotal power requirement: 32,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mmWeight: 7900 kgTotal power requirement: 54 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mmWeight: 400 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 0 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2,5 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 0x0x0 mmWeight: 0 kgTotal power requirement: 2 kwThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.