サブカテゴリ
(第3カテゴリーレベル)
生産者：
(カテゴリ： 106)
pressure: 150 tchamfer lenght: 3100 mmdistance between columns: 2600 mmthroat: 250 mmdayligth: 325 mmpiston stroke: 120 mmtable height: 875 mmajustment speed: 70.0 mm/secworking feed: 9.0 mm/secreturn speed: 60.0 mm/secpressure: 220 barControl: ATL 550 total power requirement: 5.6 kWweight: 8400 kgrange L-W-H: 3500 x 1700 x 2240 mm from a maintenance workshop very good / well-maintained condition ()Equipment:- simple NC electro-hydraulic press brake with torsion shaft- ATLANTIC NC control ATL 550 Positioning of the backgauge (X) Positioning of the depth adjustment (Y1 Y2) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, front left- NC electro-motorized backgauge (X axis) 2x manually adjustable stop fingers- 1x set of split roe foot upper tools- 1x rotating universal die block- 1x freely movable 2-hand/foot control- Sa ...
pressure: 80.0 tstroke: 285 mmflat steel: 300 x 25 mmworking feed: 10.0 mm/secreturn speed: 10.0 mm/minwork height max.: 930 mmtable:: 750 x 1425 mmtotal power requirement: 10.0 kWmotor: 400 Volt 50 Hzoil volume: 120 lweight: 1700 kgrange L-W-H: 1500 x 750 x 1800 mmFeatures:- Electro-hydraulic horizontal bending machine- Large, robust machine table made of hardened steel- Machine made of hardened and ground forged steel- Digital display for stroke setting Programming of 1x bending end point & 1x return point possible- 1x tool set (1x bending punch / 1x 1V die) Bending punch .. degree: 60° / bending radius: 5.0 mm Die .. degree: 85° / V opening: 100.0 mm- Infinitely variable adjustment of bending speed & pressing force- 1x manual material stop- Freely movable double foot switch- Machine can be moved with a pallet truck/forklift- Operating instructionsThe data for this ad was created wit ...
圧力総量:1000トン ストローク:170 mm 停止高度(ストロークダウン、調整アップ):490 mm スライド調整:16 mm 最大ストロークレート:32 s.p.m.テーブル面積:800×800 mm ラム面:825×860 mm 前方開口部自由 L-R:900 mm 上部エジェクターストローク:16 mm 上部エジェクター容量:10トン 下部エジェクターストローク:80 mm 下部エジェクター容量:32トン 寸法 L x W x H:2950x1950x4090 mm 機体重量:26 kg 主駆動:33.5 kW
圧力総量:1000トン ストローク:170 mm 停止高度(ストロークダウン、調整アップ):490 mm スライド調整:16 mm 最大ストロークレート:32 s.p.m.テーブル面積:800×800 mm ラム面:825×860 mm 前方開口部自由 L-R:900 mm 上部エジェクターストローク:16 mm 上部エジェクター容量:10トン 下部エジェクターストローク:80 mm 下部エジェクター容量:32トン 寸法 L x W x H:2950x1950x4090 mm 機体重量:26 kg 主駆動:33.5 kW
圧力:200 標準出力:2000 kN 最大ストローク長:1700mm 加工送り:50 mm/秒 工具最大重量:50000 kg電圧:400 Vtableサイズ:4.800 x 2.400 mm 総動力要求:99 kW 機械の重量 約:113 機械の寸法 約:通路幅:mmストローク:mm この広告のデータはLogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
pressure: 125 tchamfer lenght: 3550 mmdistance between columns: 3050 mmcolumn arm: 300 mmstroke of ram: 240 mmquantity of oil: 200 lcontrol: CYBELEC Cybtouch 15 range L-W-H: 4500x2200x3000 mmEquipment/accessories:- manual crowning- 3 x manual stop fingers- die displacement- pneum. upper tool clamping- foot switchThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 63 tstroke rate in continuous stroke: 90 minforce: 2200 NmTorque: 12500 Nmno. of strokes: 56 / 90 Hub/minLabour performance: 5,5 kWsheet thickness - max.: 6,3 / 3,2 mmcutting surface: 1600 mm²distance between columns: 320 mmthroat: 315 mmmin. ram stroke: 8 mmmax. ram stroke: 120 mmram adjustment: 70 mmram surface: 400 x 500 mmtool hole in ram: 40 mmtool shank hole (depth x diameter): 92 mmT-slots: 2 Stktotal power requirement: 6 kWweight of the machine ca.: 5,5 tRated force: 630 kN (63 tons)Maximum sheet thickness: 3.2 mmRam stroke: 8–120 mmStroke rate: 56 / 90 strokes per minuteShut height (table to ram): 560 mmRam adjustment: 70 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
圧力:160 ストローク:500 mm 総動力要求:20.5 kW 機械重量約7.5 t定格力:160 Mp(1600 kN / 160トン) 作動圧力:144 kp/cm² 速度:下方向:200 mm/s上方:250 mm/sラムストローク:500 mm 喉深:360 mm 最大。RAMまでの距離(表からRAM):800mmこの広告のデー は、LogoTech oHGのソフトウェアソリューションであるModulMWSで作 されました
圧力:150 トストローク:mm テーブル/RAM間の距離:660mm テーブル表面積:1500 x 610mm 床上高:mm シール直径:150mm レンジ L-W-H:1.7 x 1.5 x 2.3m 機械の重量 約:tC-フレーム-プレス-テーブルの穴 120 mm本広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
Pressure total: 2000 ton Ram stroke: 900 mm Slide adjustment: 800 mm Shut height (stroke down, adjustment up): 1800 mm Free frontal opening L-R: 5040 mm Distance between oil tray: 4840 mm Distance between the columns F - B: 2600 x 2400 mm Table surface area : 5000 x 2700 mm Slide area: 5000 x 2700 mm Die cushion capacity in table: 400 ton Die cushion stroke: 350 mm Die cushion pad area: 4200 x 2100 mm Cushion pressure in ram: 200 ton Ejector stroke in ram: 200 mm Number of strokes: 8 - 14 s.p.m. Required power: 350 kW Height over floor approx.: 11350 mm Die weight at the ram max.: 40000 kg Die Weight total: 80000 kg Weight of machine approx.: 580 ton
pressure: 200 tchamfer lenght: 3100 mmdistance between columns: 2550 mmstroke of upper beam: 200 mmthroat: 300 mmdayligth: 440 mmworking feed: 9.0 mm/secreturn speed: 80.0 mm/sec: 265 barControl: konv. work height max.: 965 mmtotal power requirement: 15.0 kWweight: 10500 kgrange L-W-H: 3360 x 1750 x 2800 mmEquipment:- simple / conventional electro-hydraulic press brake- pivoting operation, front left- electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism- Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers- manual (jog mode) and automatic cycle selector switch- manual table crowning- split set of roe foot upper tools ... H = 210 mm- 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 10/20/16/16 75 Dimensions of ...
pressure: 100 tstroke: 300 mmtable surface area: 1070 x 260 mmcolumn travel between the guideways: 1070 mmajustment speed: 8.0 mm/secworking feed: 5.0 mm/secreturn speed: 10.0 mm/secoil volume: 90.0 lengine output: 5.5 kWweight of the machine ca.: 1500 kg.dimensions of the machine ca.: 2050 x 1000 x 2200 mm Display machine from 2024 With only approximately 2 operating hours Like new condition Special price upon requestFurnishing:- Robust electro-hydraulic workshop press, with fixed cylinder- Ideal for aligning axles, shafts, etc., but also for pressing in and out of bolts, bearings, bushings and much more.- Robust welded steel construction for high demands- Table height adjustment via piston rod including round steel chain and 2x locking bolts Piston rod with metric socket- 1x set of V-block prism supports- Manometer for pressure display- simply constructed hand control with: 1x deliver ...
pressure: 100 ttable length: 1800 mmtable width: 1550 mmtable travel: 2000 mmdayligth: 1800 mmtotal power requirement: 19,5 KVAweight of the machine ca.: 22 tThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 220 tchamfer lenght: 4100 mmdistance between columns: 3600 mmcolumn arm: 410 mmram stroke speed: 150 mm/secwork speed: 10.0 mm/secreturn speed: 140 mm/secwork stroke: 265 mmdayligth: 480 mmtable height: 900 mmtable width: 110 mmoil volume: 300 ltr.voltage: 400 Volttotal power requirement: 18.5 kWweight: 15000 kgrange L-W-H: 5000 x 2400 x 2850 mmALPMAC Manufacturer Video:https://www.youtube.com/watch?v=_FxXyPAcxlEhttps://www.youtube.c om/watch?v=YfkX9RwWv_0ALPMAC Product Video Model B:https://www.youtube.com/watch?v=lmT1tfy43WE------------------------- --------------------------------MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: increased installation height increased cylinder stroke increased throat depth--------------------------------------------------------! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52)! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMAN ...
pressure: 130 tchamfer lenght: 3060 mmdistance between columns: 2690 mmcolumn arm: 410 mmstroke: 365 mmdayligth: 535 mmajustment speed: 200 mm/secworking feed: 1.0 - 10.0 mm/secreturn speed: 135 mm/sectable width: 120 mmtable height: 1050 mmtiltable up to: +/- 10.0 mmNumber of working hours: ca. 31.800 hcompressed air: 5.0 - 7.0 baroil volume: 250 loperating pressure: 340 barvoltage: 400 Vtotal power requirement: 23.0 KVAweight of the machine ca.: 12950 kgrange L-W-H: 3660 x 2310 x 2900 mmEquipment:- CNC electro-hydraulic folding/die bending press- DELEM CNC control - swiveling front left High-resolution graphic screen Clear, concise menus in the operators language Large tools and products library Graphical 2D programming automatic bending sequence calculation and collision detection EMERGENCY stop button at the front- CNC axis adjustment: Y1 - Y2 - X - R axis CNC crowning Manual adjustm ...
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic Control: Siemens S7 height over floor: 7,7 mtotal power requirement: 300 kWweight of the machine ca.: 280 tdimensions of the machine ca.: 5,75 x 4,3 x 9,55 mYear of construction 1973Modernization 2005with oil-hydraulic drive, hydraulically controlled drawing cushion in the table andRam, hydraulic cutting impact dampingstored dismantled - short video available from the seller before dismantli ...
圧力:4000 kN 固定長さ:2500 mm テーブル幅:2000 mm 日軸:2500 mm ストローク:2600 mm タンク容量:1000 総電力要求:56 kVA 機械の重量約:85 Tサイズ 約9.2 x 3,1 x 8.2 m統合ワックスインジェクションユニット(0-5バール) この広告のデータはLogoTech oHGのソフトウェアソリューションModulMWSで作成され した
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 800 tdistance between columns: 3160 mmstroke: 1100 mmcontrol: Siemens S5 distance table/blankh.,max. stroke up,adjustm. up: 1900 mmtable surface area: 3100 x 1900 mmdie-cushion pressure inside the table: 300 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 80 tstroke of drawing cushion in table: 150 mmram surface: 3100 x 1900 mmdie-cushion in pusher: hydraulic, controlled die-cushion inside the table: hydraulic, controlled total power requirement: 200 kWweight of the machine ca.: 150 tdimensions of the machine ca.: 4,95 x 3,3 x 10,2 mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 600 tdistance between columns: 2600 mmstroke: 900 mmdistance table/blankh.,max. stroke up,adjustm. up: 1600 mmtable surface area: 2500 x 1730 mmdie-cushion pressure inside the table: 250 tstroke of drawing cushion in table: 400 mmdie-cushion pressure in pusher: 63 tstroke of drawing cushion in pusher: 150 mmram surface: 2500 x 1730 mmcolumn travel -side: 1100 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled total power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: moverhauled in 2005The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 1000 tdistance between columns: 4150 mmstroke: 1200 mmdistance table/blankh.,max. stroke up,adjustm. up: 2100 mmtable surface area: 4000 x 2200 mmdie-cushion pressure inside the table: 360 tstroke of drawing cushion in table: 300 mmdie-cushion pressure in pusher: 100 tstroke of drawing cushion in pusher: 150 mmram surface: 4000 x 2200 mmcolumn travel -side: 1300 mmdie-cushion inside the table: hydraulic, controlled die-cushion in pusher: hydraulic, controlled Cut Shock absorption: hydraulic total power requirement: kWweight of the machine ca.: 280 tdimensions of the machine ca.: mThe machine was overtaken 1999.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
