のこぎり 中古 販売のため (1,085)

Wheel diameter: 470 mmCutting height: 265 mmcutting width: 390/465 mmMotor output: 1,6 kWTable dimensions: 535/485 mmTable tiltable: 45 GradDimensions (L/W/H): 800/490/2000 mmmachine weight ab.: 157 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 °Length of the rolling table: 2500 mmcutting width: 1250 mmMotor output: 4,0 kWCutting height: 90 mmCutting height at 45°: mmSaw blade diameter: mmSpeed: 4000 / 6000 U/min.weight of the machine ca.: 650 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Engine 58 ccmSaw blade length 500 mmSpeed max. 11500 rpmEngine power 2.4 kWFuel type 40:1 Oil mixtureWeight 7.1 kgDimensions L x W x H 0.55 x 0.3 x 0.26 mCondition: never used / new (5) Auction-ID: A7-50523-777

Wood band sawThanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mmCutting height 200 mmCutting width 350 mmMotor power 1.5 kWTable size 400 x 500 mmTable inclination 45 degreesSaw blade length 2950 mm Auction-ID: A7-50523-829

Band saw horizontal mitre max. 45 degrees coolant device emergency stop feed roller conveyor 1300mm - 2 pcs replacement saw bladesCutting diameter 360 mmSaw blade length 0 mmCutting width 0 mm Cutting speed 0 m/minTotal power requirement 1.0 kWMachine weight approx. 0.6 tSpace requirement approx. 2.2 x 2.05 x 1.5 m Auction-ID: A7-50523-891

Themachine is equipped with many adjustment options and tools to support and secure the workpiece to be cut. A line laser shows where the cut is to be made. The protective cover is automatically folded away. Saw blade diameter 210 mmCutting height 70 x 305 mmCutting height at 45° 35 x 305 mmSaw blade speeds 4500 rpmMotor power 1.5 kWMachine weight approx. 9 kgDimensions (length/width/height) 340 x 500 x 740 mmDelivery included:Saw blade (assembled)6 mm Allen keyDust bag2x side supportsCondition: never used / new (5) Auction-ID: A7-50523-718

New in box Auction-ID: A1-49889-225

Wooden band saw with extendable and swivel saw tableRoller diameter 200 mmCutting height 80 mmCutting width 180 mmMotor power 350 WTable size mmTable tilt 45 degreesSaw blade length 1400 x 6.5 x 0.35 mmCondition: never used / new (5) Auction-ID: A7-50523-847

With table 455x455x940mm Auction-ID: A1-49889-261

roll diameter: 400 mmthroat: 900 mmworkpiece height: 400 mmtable-size: 700 x 660 mmsaw band length: 4630 mmturning speeds: 45 - 500 m/min: mmtotal power requirement: 1,5 kWweight of the machine ca.: 0,8 tDimensions (LxWxH): 1,95 x 0,9 x 2,25 0Band saw with- Ideal welding machine- Belt grinder- Table tiltable -15° to +45°- Pneumatic height adjustmentThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sawblade tiltable: 45 °Length of the rolling table: 3.200 mmcutting width: 1.250 mmMotor output: 7,5 kWCutting height: ca. 204 mmSaw blade diameter: 550 mmSpeed: 3000 / 4000 /5000 U/min.weight of the machine ca.: 1.200 kg: Nein : Elektrisch : Elektrisch : Ja : Digital The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 120 mmMotor output: 11 kWcutting width: 420 mmCutting length: 5200 mmThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Industrial horizontal beam saw for cutting chipboard, MDF, HDF, plywood and laminated panels. CNC-controlled automatic material feed with pneumatic pressure beam, main saw blade with scoring unit. Suitable for high-precision panel cutting in industrial woodworking production. Auction-ID: A1-50229-6

Machine: Sliding table saw SCM NOVA SI 400EP Year: 2018 Sliding trolley: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0-45° Main Blade Speeds: 3000 / 4000 / 5000 RPM Ø scoring blade: 120 mm – 8500 rpm Parallel fence cutting width: 1270 mm Guidance: Manual parallel with micrometer adjustment, metric reading Table: outlet extension + squaring frame Safety: front and side emergency stop, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-50215-10

-Cutting dimension: 4300mmx4300mm MAX -Blade protrusion: 70 mm -10hp engine -Weight: 3000KG -Year: 2012 Auction-ID: A1-50215-16

Machine: HOMAG Flat Saw CHF 325 38/35 Year: 2004 Max. cross-section: 3800x3800 mm Max. height: 60 mm Blade projection: 72 mm Ø main plank: 350x75 mm Ø scorer: 200x45 mm Engine power: 9.2 kW (12 hp) Scoring power: 1.1 kW (2.2 hp) Speeds: Carriage feed 0-60 m/min, return 60 m/min, programmed pusher 25 m/min Tables: 3 air cushion tables 1900x600 mm Gross Weight: 4200 kg Power supply: 380 V Compliance: CE Auction-ID: A1-50215-5

Machine: Sliding table saw Carriage: 3200 x 360 mm Main plank: Ø250 / 300 / 350 / 400 mm Blade shaft: Ø30 mm Cutting height: 125 mm (blade Ø400 mm) Blade inclination: 90° - 45.5° Blade Motor: 4 kW (5.5 hp) Auction-ID: A1-50215-28

Machine: Panel Saw Panel dimensions: 3800 x 3800 mm Blade overhang: 55 mm Main plank: 72 mm protrusion Number of Clamps: 7 Max. feed: 80 m/min Main Motor: 7.5 kW Scorer: motorized adjustment Stop: right side Compliance: sensitive parts yes Auction-ID: A1-50215-9

Machine: Double Head Chainsaw Blades: 2x Ø500 mm widia, bore Ø32 mm (reducing) Tilt: 90° / 45° / 22.5° + intermediate positions Blade motors: 2x 2.2 kW (3 HP), 2800 rpm, three-phase 230/400V-50Hz Blade feed: pneumatic with hydraulic adjustment Cutting capacity: min. 305 mm / max. 4-6 m depending on version Heads: 1 fixed + 1 mobile (electronic positioning) Clamping: 2 vertical vices + 3 pneumatic horizontal vices Equipment: 2.5 m roller conveyor, nebulization lubrication, protective boxes, waste collection bin Control: PLC, Membrane Protected Keypad Operating pressure: 7 bar Auction-ID: A1-50215-31

Technical characteristics: - Table dimensions: 1000X560 mm - Trolley dimensions: 3200x350 mm - Squaring carriage stroke with scoring machine: 3350 mm - Cutting width on rip fence: 1300 mm - Blade inclination: 0-45° - Max cutting height with diam. Blade: 350 mm - 118 mm - Max cutting height at 45° blade front: 350 mm - 81 mm - Max blade diameter / saw hole: 350/30 mm - Saw rotation speeds: 3000/4600 rpm - Suction nozzle diameter in the frame: 100 mm - Saw Motor Power: 4kW (5.5HP) 50Hz - Incisor motor power: 0.55kW (0.75hp) - Noise level according to en 27960 standards: 81.2-83.9 dB(A) - Maximum angle opening with stops: 3600 mm Standard equipment: - Sliding anodized aluminum alloy trolley on precision adjustable barn guides made of hardened and ground steel - Fixed protection on saw blade - Additional table with 90° quick-release angle guide and step-by-step tilt graduation at 10° ...

NEW CONDITION ⦁ Double roller trolley, length 3200 mm ⦁ Incisor ⦁ Parallel fence 1300 mm ⦁ Large MSX protective cover. 400mm ⦁ Main motor 5.5 KW (7.5 HP) ⦁ 3 speeds 3/ 4/ 5,000 rpm ⦁ One-sided miter guide Two wooden crates: 187 x 131 x 105 cm, 904 kg gross weight 331 x 45 x 31 cm, 244 kg gross weight Auction-ID: A1-50215-6

Machine: Sliding table saw Carriage: 3200 mm 90° cutting height: 140 mm (blade Ø400 mm) 45° cutting height: 97 mm (blade Ø400 mm) Blade inclination: 0 - 45° (manual) Main Blade Speeds: 3000 / 4000 / 5000 RPM Scorer: Ø120 mm, 8500 rpm, independent motor Parallel fence cutting width: 1270 mm Guide: manual parallel Ø40 mm with micrometric adjustment Table: outlet extension + squaring frame Safety: emergency stops, suspended protection with suction Ø80 mm, magnetothermal circuit breaker, automatic engine brake Suction: Ø120 + Ø80 + Ø60 mm, flow rate 1200 m³/h Auction-ID: A1-50215-7

cutting diameter: 300 mmcapacity 90 degrees: flat: 330 x 250 mmcapacity 90 degrees: square: 250 x 250 mmcapacity 45 degrees: round: 260 mmcapacity 45 degrees: flat: 260 x 200 mmcapacity 60 degrees: round: 180 mmcapacity 60 degrees: flat: 170 x 170 mmband speed: 15 - 100 m/mindimensions of saw-band: 3650 x 27 x 0.9 mmControl: MEP CNC total power requirement: 2.2 kWweight: 1190 kgFully automatic electro-hydraulic band saw, featuring additional operating modes: semi-automatic semi-automatic dynamic manualDescription:- Robust, fully automatic electro-hydraulic band saw (INDUSTRIAL grade) MEP Direct control technology User interface with intuitive 10 touchscreen display Mechanical buttons for saw operating functions Guarantees reliable, simple, and intuitive operation Real-time monitoring of all cutting parameters Pivoting arm allows for convenient and safe operation Display and logging of al ...

Number of motors: 1 Stück0: , mmControl: , 0cutting width: 115 und 82 mmCutting height: 55 mmMotor output: 2.0 kWmachine weight ab.: 45 kgGraule KS crosscut saw for cutting (glass) beads with a rebated jointwith manual and electronic length stop Suitable for wood, PVC, aluminum-----------------------------------------------Brief manufacturers description:- Crosscut and miter saw for precise and user-friendly cutting to lengthin the strip area- Sturdy gray cast iron construction- A double ball-bearing axle acts as a pivot point belowthe material support table, facilitating material cutting. The cutis always made at the rear top.- Quick miter adjustment up to 45°- Readjustable fixed stops at 90° and 45°- Upper saw blade guard can be connected to extraction system-----------------------------------------------Technical data:Motor: 400 V / 2.0 kWSpeed: 2,800 rpmMax. cutting width: 115 mm ...

Sawblade tiltable: 0-46 °Length of the rolling table: 3200 mmcutting width: 1000 mmMotor output: 5,5 kWCutting height: 179 mmCutting height at 45°: 123 mmSaw blade diameter: 500 mmSpeed: 3/4/5000 U/min.weight of the machine ca.: 1300 kgThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3

Production number: 153Saw blade diameter: approx. 300 mmTable dimensions: 940 x 830 mmincl. carriageCarriage length: 1300 mmSlide projection: 900 mmSaw blade swivel: from 45° to 90° Auction-ID: A7-49089-521

saw blade diameter: 350 x Ø 30/40 mmcutting diameter: 135 mmcutting length: 430 mmdimensions of saw-blade: 350x3,0/2,4x40 mmturning speeds: 3800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 100 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60° / 45°), with fixed stop- Compound cut on one side up to 45°, with fixed stop- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionCutting data :- Cutting length at 90° = 430 mm- Cutting height at 90° = 135 mm- Cutting length at 45° = 310 mm- Cutting height at 45° = 92 mm Special accessories included:- 1x HM circular saw blade 350 x 3.0/2.4 x 40 mm Z = 108 FTZ neg. for aluminum ...

saw blade diameter: 520 x Ø 50 mmcutting diameter: 200 mmcutting length: 420 mmCutting height at 45°: 140 mmdimensions of saw-blade: 520x3,6/3,0x50 mmturning speeds: 2800 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 310 kg.range L-W-H: 1400 x 900 x 1650 mm- Crosscut and miter saws for crosscuts- Miter adjustment on both sides (60°/45°), with fixed stops- Shift cut on both sides (60°/45°), with fixed stops- Stable cast iron construction- Precise ball bearing guidance of the tool slide hardened and welded steel shafts- manual saw feed- Saw blade infinitely adjustable in height- socket for opt. suctionFurnishing :- 3.0 kW motor for ALU cuttings- Saw blade can be tilted via handwheel and worm gear (shift cut)- Saw blade diameter 520 mm- Saw blade mounting hole 50 mm- Saw blade speed 2,800 rpm- 400 Volt / 3 kW (S6/40%) motor with brake and aut ...

saw blade diameter: 420 x Ø 40 mmcutting diameter: 170 mmcutting length: 410 mmdimensions of saw-blade: 420x3,2/2,4x40 mmturning speeds: 3500 U/minDust suction hood: 100 mmtotal power requirement: 3,0 kWweight of the machine ca.: 120 kgdimensions of the machine ca.: 1300 x 800 x 1600 mm- Cross-cut and miter saws for cross-cut cuts- Miter adjustment on both sides (60 ° / 45 °), with fixed stop- Shifter cut on both sides 45 °, with fixed stop- Stable cast iron construction- Precise linear bushing guide on the tool slide hardened and ground steel shafts- manual saw feed- Saw blade infinitely adjustable in height- nozzle for opt. SuctionCutting data:- Cutting length at 90 ° = 410 mm- Cutting height at 90 ° = 170 mm- Cutting length at 45 ° = 290 mm- Cutting height at 45 ° = 115 mm Special accessories included:- Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 ° ...