| Descrizione: |
MOHRBACH MB PCT
macchina usato
Cartoner, make Mohrbach, type MB PCT, year 2015, Possible folding box
formats:, 92 82 95mm and 92 82 75mm, Function description, Machine
for erecting and gluing boxes of flat blanks, as well as filling the
boxes, lid molds and lid closing., The magazine supply for the
cardboard blanks is monitored by 2 photocells. One is used to warn, at
minimum cutting and the second, the machine switches to malfunction
when only a few are left, There are blanks in the magazine., A
cardboard blank is removed from the inclined magazine by means of a
vacuum feeder, into which, Transport guide rails stored and with feed
bars horizontally over the folding tool, transported. Here, the blank
passes the glue station, where hot glue is applied to the cardboard
blank, is applied., After the blank has been transported over the
folding tool, it becomes vertical from the, working push-in ram pushed
through the opening of the folding tool. The glued, Cardboard sides
are erected around the ram and, thanks to the special shape of the
tool jaws, to the, Lateral connecting straps pressed and glued., The
erected and glued box is stripped off below the tool and placed in a,
underneath running cycle chain with pushing and counter-holding
drivers deposited and to, Filling station transported., The pyramid
bags, pre-packed in a bag, are transported from the side via a belt
conveyor, fed, set up and placed in the box using the toploading
method., In the following station, the bag is slightly compressed from
above using a cylinder,, so that the upper bag flap does not protrude
over the edge of the box and the two at the same time, Dust F4550968
flaps of the box smashed in., In the further process, glue is applied
and the front flap is shaped and glued., At the end of the cycle
chain, the finished box is placed on an outfeed conveyor to the left
in the direction of travel, pushed off and transported out of the
machine., The reason for the levy is a change of concept. The cartoner
also has an infeed and outfeed conveyor and a Robatech gluing system.,
Folding boxes were filled with tubular bags, the station for filling
the tubular bags is integrated., power: max. 24 boxes / min (depending
on processability and size of the cutting material), Dimensions /
weight: L x W x H: approx. 3,900 x 2,100 x 2,250 mm
seller offer
No. resale 66.5
|