Produttore: JUARISTI Modello TX1-D Anno 2008 CNC HEIDENHAIN TNC-530 Tavolo Tavolo tipo Juaristi MG-6 Piano 1.250 x 1.600 mm. Peso massimo consentito sulla tavola 5.000 kg. Rotazione tavola (asse B) 0,001º 360.000 pos. Viaggio Corsa tavola (asse X) 2.700 mm. Corsa verticale (asse Y) 1.500 mm. Corsa trasversale (asse Z) 1.500 mm. Assi controllati X, Y, Z, B Traslazione rapida 25.000 mm/min Testa Tipo di testa Birrotativo 2, 5º / 2, 5º Cono ISO 50 DIN 69871/1-AD Velocità 871-3.000 rpm Gamme di velocità 2 Gamma inferiore 5-871 giri/min Gamma superiore 871-3.000 giri/min Potenza massima mandrino 37 kW Coppia massima del mandrino 1646 Nm. Equipaggiamento aggiuntivo  ...

Produttore: JUARISTI Modello TS 3-MG 12 Anno 2009 CNC HEIDENHAIN i TNC-530 Tavola rotante Tipo Juaristi MG-12 Superficie del tavolo 2.000 x 2.500 mm. Scanalature a T 11 T Distanza fessura 170 mm. Peso massimo consentito sul tavolo 8.000 kg Rotazione tavola (asse B) Continuo – 0,001º Viaggio Corsa longitudinale (asse Z) 2.475 mm. Corsa assiale (asse W) 800 mm. Corsa verticale (asse Y) 2.500 mm. Corsa trasversale (asse X) 3.000 mm. 5 assi controllati X, Y, Z, W, B, U Mandrino principale Diametro cannotto 130 mm. Velocità 3.000 giri/min Orientamento dell'asse principale INCLUSO Cono ISO 50 DIN 69871/1-B Testa di fresatura Tipo INCLUSO Potenza testa 30 kW Gamme d ...

Manufacturer: JUARISTI Model: MDR-130-CM Boring machine Travels (xyz): 5000 x 3000 (up) x (800-900 + 1500 table) Weight on table:20 tm Rototranslanting table of 3000x2000 x 1500 of translation FAGOR read-outs Manual HURON head ...

• maggiori informazioni

spindle diameter:150 mm x-travel:5100 mm y-travel:3600 mm w-axis:1950 mm z-axis:1000 mm spindle drive:52 kW spindle turning speed range:5 - 1600 U/min spindle taper ISO:50 B-axis (table):0,001 ° table surface area:2500 x 2500 mm table load:30 to workpiece swing dia.:~6000 mm weight of the machine ca.:58 t total power requirement:85 kW dimensions of the machine ca.:10,5 x 8,6 x 6,9 m Machine retrofit and overhouled in 2007 with HEIDENHAIN TNC 530 control - angular milling head - exhauster - coolant device

spindle diameter: 125 mm x-travel: 3000 mm y-travel: 1500 mm control: Heidenhain TNC 355 taper ISO: 50 w-axis: 600 mm Table dimensions: 1200 x 1500 mm table load: 5 t spindle turning speed range: 12 - 2300 U/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 4440 mm y-travel: 1500 mm z-axis: 400 mm turning speeds: 7-1000 U/min Tool bore: SK 50 spindle stroke: 800 mm digital readout: total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m optional with floor plate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 205 mm x-travel: 10000 mm y-travel: 2500 mm w-axis: 500 mm spindle travel: 1250 mm Control: Heidenhain type: TNC 355 spindle taper ISO: 50 transmission ratio: 2 feed - independent: 0-3000 mm spindle motor: 37 kW total power requirement: 70 kW weight of the machine ca.: t dimensions of the machine ca.: 14,1x3,2x5,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diametro mandrino: 105 mm sella: 1000 mm a corsa: 1000 mm potere di potenza totale: kW peso della macchina ca.: t dimensioni della macchina ca.: m Marca: Juaristi Tipo: MDR105 CNC CNC marca: Heidenhain CNC modello: TNC145 Anno di marca: 1983 Pertura del tavolo: 1.000 mm La larghezza del tavolo: 1.000 mm X: 1.000 mm Y: 1.000 mm Z/W: 1.000 mm Cono del tramandrino: ISO 50 Diametro del trae: 105 mm ø

x-travel: 4000 mm y-travel: 1500 mm z-travel: 3500 mm control: Siemens 840 D total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine was producing parts of airplane Motors for Rolls Royce. Machine very little used and as new. Machine with 2 pallet tables, diamter 1500 mm 2 x ATC 40 tool changer Automatic milling head 1ºx1º indexing, 37 kW Max. spindle speed 5000 rpm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year: 1980 Spindle Diameter: 125mm X axis travel: 3000mm Y axis travel: 2500mm (vertical) Z axis travel: 2600mm Rotary table: Si / Yes / Oui / Ja Table Size: 2000mm x 1700mm Spindle Speeds: 5-1000 r.p.m. Tool Taper: ISO 50 Max weight on table: 8 tons Spindle Traverse: 800mm Digital Read Out: Fagor 3 ejes/axis Equipped with: Cabezal de fresar, apoyos laterales, roscas whitworth y metrica Equipment: Universal milling head, outrigger supports, screw cutting imperial and metric Motor: 25cv/hp Weight: 34 Tn.