Output Capacity: 1000 kg/h ...

• maggiori informazioni

average output 500 kg/h depending on materials and moisture content,, including : LOADING BELT, 1,4 Kw drive 7,0 mt.lomg x 0,9 mt.wide constructed in sturdy painted steel structure,, side walls,, PVC belt AGGLOMERATOR, 1000 mm. diam.steel barrel with infeed 115 kW, Hp 150 main engine, side door for inspection and knives replacement, replaceable inner lining 400 mm high grease lubricating system for engine bearings oil lubricating station for hub bearings, through automatic pump with oil pressure indicator bearing cooling system through circulating water, 0,75 kW oleodynamic power station electrovalve for closing/opening unloading door Hp 3,0 steam vacuum drive control switchboard and panel a ...

Average output 800-1200 kg/h depending on materials and moisture DIAGONAL LOADING BELT Steel structure, side walls,PVC anti-slip belt,1,4 kw motor, Dimensions: 850×6000 mm. AGGLOMERATOR D1300 Steel barrel diameter 1300 mm. Main motor 250 kw (available with 300 kw motor on request) Replaceable inner steel lining Side door for inspection and blades replacement, Sucking vent for steam extraction Oleodynamic power station 0,75 kw with electrovalve which controls opening of unloading door.water loop cycle for cooling hub bearings belt. Electrical cabinet Dimensions: L mm.3950, W.mm.2.280, H. mm.4652. DISCHARGING HOPPER Diagonal, engine moved auger for material extraction (1,1 kw) Discharging hei ...

On and off when needed Low maintenance costs (no discs, just knives which can be re-sharpened) No need to reduce size, on most scraps. Suitable for film + foam + fibers, moisture and some contamination are well tolerated. Best degassing in the process, compared with other systems. Remote assistance through modem Agglomerator with barrel diam. 1500 mm.,LxWxH 4,3 x 2,3 x 5,050 mt. 570 kw , installed power about 370 kw in work Steel cylinder case with inspection door, Side opening panel for inspection and replacing blades Power switchboard, Exchangeable inner steel liner for barrel Oleo-dynamic power station 0,75 kw with electro-valve opening, Hub temperature control system, Grease lubricated d ...

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

REF-0 ANGELUS 60L AGGRAFFATRICE AUTOMATICA PER LATTINE CON 6 TESTE DI AGGRAFFATURA E RIEMPITRICE SOTTOVUOTO A 24 VALVOLE Cucitrice automatica con 6 teste di aggraffatura. Produttore: Angelus. Modello: 60L. Dimensione lattina: ø73mm. Completo di un sistema di riempimento del vuoto a 24 valvole (la pompa per vuoto è inclusa). Dimensioni d'ingombro: larghezza 2.400mm, lunghezza 4.000mm, altezza 2.600mm.

Tipo: NT 620 Lavorare con carne disossata Larghezza di carico: 620 mm Altezza prodotto: 130÷220 mm Testa bistecca: 700 aghi steaker (2 х 350) Connessione elettrica: 400/440 V, 50/60 Hz Valore di connessione elettrica: 8,0 kW ; 17 А Dimensioni macchina in mm: Lunghezza: circa 2200 Larghezza: circa 1250 Altezza: circa 2200

AUTOBOX HIPAK 2675 BOXMAKER AUTOMATICO Anno di produzione: 2008 Max 2400 mm Min 100mm x 330 mm Distanza lama – distanza lama max 1400 mm gioco lama – distanza lama Min 65 mm Larghezza coltello 8 mm La macchina è in buone condizioni può essere visto in produzione in Europa  ...

• maggiori informazioni

Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago. max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar. Material to be processed: welding and staple wire, max. tensile strength: 1600N/mm². Wire diameter: 0.8 - 1.0 - 1.2mm, tolerance on max. diameter: 0.05mm. Support: K300 - D300, weight of spools/wire baskets: 15 - 18 - 20kg, weight: approx. 3000kg, mit Dokumentation.