We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Fabricant:
(Catégorie: 102-100)
utilisé
Tour Fabricant: Schaerer Modèle: UN 200 Distance centrale: 1600mm
utilisé
Description: .Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 1,500 mm, weight approx.: 500 kg
utilisé
Description: Length of the jaw: 900 mm Headstock for collet chuck type: F27 Collet opening: 22 mm Center height: 102 mm Largest distance between headstock and cross support: 335 mm Drive through leather/nilon V-belt for headstock: F27 With turret holder and other machine accessories as shown in the pictures For further technical data see pictures With technical documentation as shown in the picturesApprox. Onsite Dimension. (l x w x h): 1,300 x 600 x 1,680 mm, weight approx.: 500 kg
utilisé
Description: Rotational speed range 45 to 3000 rpm Turning diameter over bed approx. 260 mm, over support approx. 110 mm With retrofitted digital display Including accessories in the tool cabinetApprox. Onsite Dimension. (l x w x h): 1,500 x 900 x 1,800 mm, weight approx.: 500 kg
utilisé
Support , chariot traversant d’un tour Schaublin, sgt. Condition Voir les photos ! Rotatif, alimentation par levier, alimentateur, les essieux sont serrages ! C’est pour un tour de la marque Schaublin ! Expédition possible !
utilisé
Description: serial number: 860/0026 control: SIEMENS Sinumerik working hours: approx. 13134 hrs.  , spindle power: 8.5 kW spindle speed: 3000 rpm connected load: 45 kVA  , including: KRAINTEK RM Cleaning Machine, YOM 2018, power: 3 kW, weight: 200 kg water cooling system  , without conveyor/transportation system  , please also have a look at the PDF documents of this machine serial number: 860/0026, control: SIEMENS Sinumerik, Approx. Onsite Dimension. (l x w x h): 4,800 x 4,000 x 2,500 mm, Read off operating hours: 13,134 h, weight approx.: 8,500 kg
utilisé
Description: SCHERER FEINBAU VDZ 220 XL DS Vertical lathe with Double spindle and Robot cell Serial number and Control Serial number: 68333 Control: SIEMENS Sinumerik 840D sl Working area Workpiece height max.: 200 mm Workpiece diameter max.: 250 mm Rotation diameter max.: 390 mm Spindle stop-turret distance max.: 580 mm Spindle stop-turret distance min.: 240 mm Spindles Spindle speed max.: 5500 rpm Spindle power per spindle: 37.7 kW Spindle torque per spindle max.: 300 Nm Spindle head with short taper (DIN 55026): A6 Axis travel X-axis axis travel (in the work area with closed cover): 365 mm Axis travel X-axis (total): 886 mm X-axis axis travel (via turret centre): -20 mm Axis travel Y-axis: +100/-80 Axis travel Z-axis: 250 mm 12-position disc turret VDI 40 All tool positions driven Max. speed (25% ED): 4000 rpm Max. power (25% ED): 10 kW Torque max. (25% ED): 63 Nm General da ...
utilisé
Description: control: ,SIEMENS SIEMATIC HMI after dep retrofit ,not used at production again Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 1,900 mm, weight approx.: 6,000 kg
utilisé
turning diameter: 36 mmturning length: 125 mmswing diameter over bed slide: mmControl: total power requirement: 22 kWweight of the machine ca.: 10 tdimensions of the machine ca.: 6500mm x 1400mm x 2100mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
Hauteur de pointe 660 mm Largeur de pointe 11000 mm Diamètre tournant 1320 mm Tourner max. via support 950 mm Puissance 55 KW Couple 35000 Nm Clamping max. 1200 Poids de pièce de travail 14 à Accessoires: Lunette 200-630 mm
utilisé
Hauteur de pointe 660 mm Longueur maximale 12000 mm Diamètre tournant 1320 mm Tourner max. via support 950 mm Clamping max. 1200 Puissance 55 KW Couple 35000 Nm Lunette I 200-630 mm Poids de pièce de travail 21 à Accessoires: Convoyeur
utilisé
Description: Spindle bore: 50 mm Turning diameter over top slide: 220 mm Center height: 215 mm Turning length: 1,000 mm Motor power: 11 kWApprox. Onsite Dimension. (l x w x h): 2,210 x 1,020 x 1,350 mm, weight approx.: 3,000 kg
utilisé
Description: Spindle bore: 50 mm Turning diameter over top slide: 220 mm Center height: 215 mm Turning length: 1,000 mm Motor power: 11 kW Spindle speed (max.): 1,600 rpmApprox. Onsite Dimension. (l x w x h): 2,210 x 1,020 x 1,350 mm, weight approx.: 3,000 kg
utilisé
Fabricant | Fabricant: Stanko Type | Type: 16k20 Numéro de stock | Numéro de stock: 0980 Année de construction | Année de fabrication: 1978 Longueur de tournage | Longueur de tournage: 1000 mm Diamètre de balançoire au-dessus du lit | Diamètre de la balançoire au-dessus du lit: 440 mm Spindelbohrung Alésage de la broche: 50 mm RPM | vitesse de virage: 12.5 - 1600 tr / min Tension | Tension : 380 V Puissance du moteur | Puissance d’entraînement: 10 kW Dimensions (LxlxH) | Dimensions (LxlxH): 2800 x 1200 x 1800 mm Machine de musculation | Poids de la machine: 2,5 t
utilisé
Description: Operating hours with pick-up: 91452 hrs. with bar feeder, type FMB turbo 3-36/3200A , Serial 48-261109 R 751911, Chip conveyor, type P09.08M7464.01, Serial 815064 turning diameter: 32 mm, serial number: 0797, control: Fanuc 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,100 kg
utilisé
Description: Operating hours with pick-up:76804 hrs ith bar feeder, type FMB turbo 3-36/3200A , Serial 51-261513 R879213, Chip conveyor, type P09.11M3416.01, serial 12300408turning diameter: 32 mm, serial number: 1123 (174), control: Fanuc 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,100 kg
utilisé
serial number: 1,120, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, weight approx.: 3,100 kg
utilisé
Description: Operating hours with pick-up:22760 hrs. with bar feeder, type FMB turbo 3-36/3200A , Serial 57-263358, chip conveyor, type P09.17M5112.01, Serial 12329522 serial number: 3,654, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, weight approx.: 3,100 kg
utilisé
Description: Operating hours with pick-up: 125245 hrs. with bar feeder, type FMB, chip conveyor, type P09.04M6258.01, serial 44660 Further technical data can be found in the PDFturning diameter: 20 mm, serial number: 0581 (054), control: FANUC Series 18i-TB, Approx. Onsite Dimension. (l x w x h): 2,400 x 1,200 x 1,700 mm, C-axis simultaneously controllable: No, Counter spindle: Yes, Accessories included: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 2,200 kg
utilisé
Description: Operating hours with pick-up: ,20573 hrs. with bar feeder, type Haas Bar Feeder, Serial 158892, Chip conveyor, type P09.17M8736.01, Serial NP-12332927 serial number: 0095, Approx. Onsite Dimension. (l x w x h): 3,200 x 1,400 x 2,200 mm, weight approx.: 4,300 kg
utilisé
Description: with bar feeder, type FMB, Chip conveyor, typeP09.03M6841.01, Serial 64464turning diameter: 32 mm, serial number: 0274, control: Fanuc 16i - TB, Approx. Onsite Dimension. (l x w x h): 2,600 x 1,800 x 1,700 mm, Type of clamping chuck: collet chuck, C-axis simultaneously controllable: No, Counter spindle: Yes, Accessories included: Yes, Integrated C-axis: Yes, Tailstock: No, Bar feeder: Yes, weight approx.: 3,800 kg
utilisé
Snb 400x1500p
utilisé
turning diameter: 800 mmturning length: 1500 mmswing diameter over bed slide: 250 mmtotal power requirement: kWweight of the machine ca.: tdimensions of the machine ca.: mNext image can not be found: d833 tacchi mt400 (2)Brand: TacchiType: MT400Distance between centers: 1.500 mmCentre height: 400 mmSwing over bed: 800 mm øSwing over support: 250 mm øSwing in the gap: 550 mm øSpindle boring: 130 mm ø3-Jaw chuck: 390 mm øDigital read-outRapid traverse on longitudinal and cross travellingThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
Réf. -N°: 10319Fabricant: TAKANGType de contrôle: Digitalanzeige ACU-RiteContrôle: KonventionellLieu de stockage: HalberstadtPays d’origine: TaïwanPoids de la machine Ca.: 1,3 tDiamètre de la balançoire au-dessus du lit: 430 mm Largeur du lit: 300 mm Longueur de la pointe: 1500 Hauteur centrale: 215 mm Longueur du lit: 1600 mm
utilisé
Tecno-V 30 CNC Motorised NCl, année 2001, Mitsubishi Meldas CNC , 2 turrets, turret 1. 12 stations toutes motorisées, turret 2. 6 stations z-axis seulement, VDI30, bar passage 42, Bellegrandi collet holder, Lemca Boss 545 chargeur. Manuels, Machine en production. Très rapide.
utilisé
diamètre de tournage : 0 mmlongueur de tournage : 3000 mmdiamètre de balançoire sur glissière de lit : 710 mmpuissance totale requise : kWpoids de la machine ca. : tdimensions de la machine ca. : m
utilisé
Description: SPECIFICATIONS Character: Tos Type: SU 50 A Distance between centers: 1250 mm Center height: 250 mm Turning diameter above the bed: ø500 mm Turning diameter above the base: ø270 mm Door outlet: ø55 mm 3-jaw chuckApprox. Onsite Dimension. (l x w x h): 3,300 x 1,300 x 1,500 mm, weight approx.: 3,000 kg
utilisé
Numéro de stock: 3760 TOUR Fabricant: TRENS - TOS, Type: SN 50C - 2000 N° de machine: 08005020060214, Année de construction: 2006 Spécifications: Longueur de tournage 2000 mm Hauteur centrale 250 mm Retourner le lit 500 mm Tournage en retrait 700 mm Alésage de la broche 52 mm Vitesses de broche 22-2000 tr/min Puissance du moteur de broche 5,5 kW Accessoires: Poupée de queue Ecran numérique Jenix - Ikke monteret - non monté dkk 10.000.- Support multi-outils Chuck de centrage mm Doublure universelle mm Lunette fixe mm Longueur: 3640 mm, Hauteur: 1540 mm, Largeur: 1100 mm, Poids: 1890 kg
utilisé
Diamètre de circulation sur le lit ... 500mm Distance entre les stands ... 2000mm poids de la pièce ... 600kg Diamètre de circulation via support ... 270mm Puissance du moteur principal ... 5,5 kW L x L x H ... 1100 x 3575mm Poids de la machine ... 1845kg révision générale complète en 2022, certificat CE, nouvelle couverture, Machine en bon état, possibilité de tester sous tension.
utilisé
Description: Machine number: 6068/9 Spindle opening: 25 mm Cam-controlled weight feed Including further accessories Attention: Only run with oil!Approx. Onsite Dimension. (l x w x h): 1,200 x 600 x 2,000 mm, weight approx.: 650 kg
utilisé
Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 6.5 A Frequency: 50 Hz Working range: Spindle diameter round: up to 15 mm Hexagonal: up to 12 mm Square: up to 10 mm Workpiece diameter: up to 15 mm Distance from collet chuck to tailstock edge: 240 mm Turning length with sliding headstock: up to 70 mm Main spindle speed (12 steps): 900 - 6500 rpm Drill tailstock stroke: up to 100 mm Clamping diameter of the quill collet: up to 13 mm Mounting in Morse quill: MK2 Tools for turning rings: 10 x 10 x 125 mm Parting steels: 12 x 3 x 120 mm Round forming steels diameter front/rear: 44/40 mm Incl. items of documentation as well as various spare parts and machine accessories for the machineApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 700 kg
utilisé
Description: Operating voltage: 380 V Control voltage: 220 V Rated current: 6.5 A Frequency: 50 Hz Working range: Spindle diameter round: up to 15 mm Hexagonal: up to 12 mm Square: up to 10 mm Workpiece diameter: up to 15 mm Distance from collet chuck to tailstock edge: 240 mm Turning length with sliding headstock: up to 70 mm Main spindle speed (12 steps): 900 - 6500 rpm Drill tailstock stroke: up to 100 mm Clamping diameter of the quill collet: up to 13 mm Mounting in Morse quill: MK2 Tools for turning rings: 10 x 10 x 125 mm Parting steels: 12 x 3 x 120 mm Round forming steels diameter front/rear: 44/40 mm Incl. items of documentation as well as various spare parts and machine accessories for the machineApprox. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,500 mm, weight approx.: 700 kg
utilisé
Tourelle d’outils avec 12 positions d’outils, avec outils entraînés, usinage de barres jusqu’à 65 mm de diamètre, usinage de mandrins jusqu’à : 250 mm, max. 6000 tr/min, type de commande : TX8F, mesure optique de l’outil, avec magasin de chargement de barres, Fabr. LNS, type : QUICK-LOAD SERVO, avec alimentateur de matériau, système de filtration, Fabr. RUEZ & Convoyeurs à copeaux
utilisé
Description: .Approx. Onsite Dimension. (l x w x h): 1,000 x 800 x 1,200 mm, weight approx.: 200 kg
utilisé
Tour
utilisé
Tour
utilisé
Tour
utilisé
Accessoires: - Lunette fixe et en cours d’exécution - Porte-acier Rapid Type "B" Tourner: 225 mm Largeur de pointe 1000 mm Le fuseau a porté 42 mm Vitesses de fuseau 35 - 1500 tr/min.
utilisé
Nous offrons Tour VDF avec lit de mandrin à trois mors >100cm L :env. 350cm 3000kg voir photos La machine est d’occasion, entièrement fonctionnelle. Il est vendu dans le même état que celui indiqué sur les photos. Spécifications - Fabricant : VDF Werkzeugmaschinen Hamburg - Lit > 100cm - Poids : env. 3000 kg (informations clients) - Connexion : 230V 50 Hz / 24V - Dimensions : estimé 3500 x 150 x 100 cm Aucune autre donnée n’est disponible. La machine se trouve toujours dans l’usine de notre client près de Staßfurt. Il est vendu départ usine EXW (option de chargement par chariot élévateur disponible). Veuillez n’enchérir que si vous acceptez les conditions générales de vente Nous vendons les actifs pour le compte de nos clients. Les prix de l’offre s’entendent comme des prix nets en EURO départ usine. Les offres sont susceptibles d ...
utilisé
diamètre de tournage: 800 mm longueur de tournage: 3000 mm diamètre de balançoire sur glissière de lit: xx mmpuissance totale requise: xx kWpoids de la machine ca.: tdimensions de la machine ca.: m
utilisé
turning diameter: 300 mmturning length: 2000 mmswing diameter over bed slide: 520 mmtotal power requirement: 7,5 kWweight of the machine ca.: 2,8 tdimensions of the machine ca.: 4745 mm x 1340 mm mThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
utilisé
Description: Turning length: 1000 mm Turning diameter over support: 240 mmApprox. Onsite Dimension. (l x w x h): 2,400 x 800 x 1,400 mm, weight approx.: 800 kg
utilisé
Tour à vis mère et à traction VOEST DA300 Année de construction ca 1980 Diamètre de tournage au-dessus du lit 600mm Longueur de tournage effective : 1850 mm Passage de broche : 85 mm Vitesses : 14 - 1000 rpm Contre-pointe : MK5 Broche frontale de jeu réversible : 0,5 mm Glissière supérieure de dégagement d’inversion : 0,25 mm Luge à lit de traversée rapide : dans les deux sens ÉQUIPEMENT - Multifix C - 5 supports en acier - Pointe centrale rotative MK4 - 4 mandrins à mâchoires de 400 mm, plus 3 jeux de mors - 3 mandrins à mors 400mm - 3 jeux de mâchoires - Les deux garnitures Röhm - Lunette fixe La machine est en bon état. Le banc de la machine est en très bon état.
utilisé
Spécifications: Largeur centrale 1000 mm Hauteur centrale 180 mm Alésage de la broche 52 mm Diamètre circonférentiel au-dessus du lit 380 mm Diamètre de circulation sur support 185 mm Vitesses de 24 à 2000 tr/min Puissance d’entraînement 5,5 kW
utilisé
Description: Point width approx. 1500 mm , Turning diameter over bed approx. 940 mm , Turning diameter above support approx. 740 mm , Rod clearance approx. 200 mm Fabrication number 1-206/59 , Power 30 kW , Voltage 3 x 500 V Nominal current 55 A Frequency 50 Hz Control SIEMENS Sinumerik The machine was modernized in 2001 by the Stork companyApprox. Onsite Dimension. (l x w x h): 4,500 x 2,200 x 1,950 mm, weight approx.: 4,500 kg
utilisé
Mandrin, Multifix, 15KW, Mas. N° 07351501
utilisé
Key data: 400 mm, 1500 mm, 400 mm
Fabricant | Fabricant : Wafum Tapez | Modèle : TUD 40 x 1500 Numéro de stock | Numéro de Stock : 1011 Longueur de tournage | Longueur de tournage : 1500 mm Diamètre circonférentiel au-dessus du lit | Diamètre de balançoire au-dessus du lit : 400 mm Alésage de broche | Alésage de la broche : 56 mm 21 vitesses de broche de travail | 21 vitesses : 18..1800 tr/min Charge connectée | puissance connectée : 7,35 kW Poids de la machine | Poids de la machine : env. 2,8 t
utilisé
Type / type: TUD- 40 Hersteller/ marque: WAFUM Année de fabrication: 1975 Balançoire sur lit / toboggan: 400 /225 mm Drehlänge / longueur de tournage: 500 mm Trou de broche de travail dans la broche: 56 mm Cône de fuseau principal : Morse 6 Cône de plume de poupée : Morse 5 Diamètre de la plume/diamètre de la poupée. Manchon: 90 mm Manchon de réglage: 180 mm 21 vitesses de broche de travail / 21 vitesses: 18..1800 tr / min Alimentations longitudinales / longues. Alimentation: 0.08 .. 3,26 mm / tr/tr Flux de plan / flux croisés: 0.04.. 1,63 mm / tr Pas de filetage / filetage: mètre. Filetage: 1..88 mm Filetage de pouce: 1..88 gg. / 1 » Filetage du module: module 0.25..3.5 Filetage diamétralement : pas 112..8 Déplacement rapide du support : 4,2 m/min Puissance connectée : 7,35 kW Poids de la machine : env. 2,8 t
utilisé
Key data: 250 mm, 1000 mm, 380 mm
Hameau de Commodor AC (Vitesse de coupe constante) Année de construction 2004 N° de machine 3634 Diamètre circonférentiel au-dessus du lit 380mm Diamètre de circulation sur le chariot de taille 190 mm Puissance nominale 5,5kW Vitesses de broche 13-2000 tr/min Passage de broche 56mm Largeur centrale 1000mm Contre-pointe MK4 Force d’avance 10kN Accessoires/Équipement : - Mandrin de tour à trois mors 200mm - Mâchoires pivotantes à l’intérieur et à l’extérieur - Support de base Multifix B avec 2 porte-outils - Dispositif de refroidissement - Affichage numérique 3 axes (hameau) - Vitesse de coupe constante -Mode d’emploi - Lunette fixe et tournante - Protège-mandrin à verrouillage électrique - Arrêt d’urgence - Plusieurs arrêts de lit La machine a été testée techniquement et est en très bon état. La géométrie a ég ...
utilisé
Description: .Approx. Onsite Dimension. (l x w x h): 1,400 x 800 x 1,300 mm, weight approx.: 250 kg