MORBIDELLI machine à vendre

Key data: 900 mm, 2600 mm, 80 mm

Modèle Author 503, machine à 3 axes, x = 900 y = 2600 Z = 80, avec scie à rainurer, 1 x fraisage, perçage de cheville en T 18 + 3 sur la face avant, 2 + 2 par l’arrière et l’avant 1 x, année de fabrication 95

Il fonctionne, fonctionne correctement, est parfois utilisé dans le fraisage et le perçage spécialisés de meubles. Équipement très simple, sans problème et gracieux. 16 broches de perçage, 2 électrobroches, unité de scie, pompe à vide Becker. Contrôle Trio 6000.

Tête de perçage horizontale S/R à gauche Tiré d’un scm Tech 99 lorsqu’il a été mis au rebut

Key data: 3050 mm, 1200 mm, 120 mm

Version technique : Table console 3050 x 1200 mm avec 6 supports déplaçables manuellement, 2 ventouses par console et un rail d’excavation pneumatique Aide à l’installation laser spot, pompe à vide Commande CNC XILOG Plus Broche principale 7,5 kW HSK 63F avec axe C, 1500 – 24 000 tr/min Plaque de changeur d’outils 10 fois 1 unité d’adaptation scie pivotante Tête de perçage avec : 12 broches verticales, 4+2 broches horizontales, scie à rainurer Dimensions d’installation : 6800 x 3040 mm Poids : 2850 kg

Je vends un centre d’usinage CNC 3 axes SCM Morbidelli Author A630S avec table en treillis Année de construction 2004. Configuration: Broche principale 3 axes SCM 6,6 kW 24 000 tr/min Magasins d’outils 2 x 6 positions ISO30 sur la tête Deuxième broche principale 3 axes SCM 6,6 kW 24 000 tr/min Deuxième magasin d’outils 6 positions ISO30 sur la tête 1x scie à rainure X-direction Tête de perceuse 12+4+4 broche de perçage entièrement équipée Surface de travail utilisable 3050x1370 x Z 180mm. 2 surfaces de travail, 4 zones de serrage Système automatique de Central Lubrikazion Pompe Gardner Denver 215/260 m3/h. Xilog Plus nouveau logiciel avec mode d’emploi. Très bon état. Disponible de la même manière.

X-travel: 3665mm, y-travel: 1250mm, z-travel: 200mm, max. plate thickness: 120mm, weight: 4t.

X-travel: 3660mm, y-travel: 1250mm, z-travel: 180mm, length: 5300mm, width: 2200mm, height: 2500mm, weight: 4.3t.

Working area: 2890mm x 900mm x 80mm, axis working paths: X/Y/Z: 3270mm/1200mm/115mm, max. vector axis speed: 75mm/min. Spindle speed: 1200-18000rpm, max. panel thickness: 80mm, control: TRIA 7500. Dimensions X/Y/Z: 4400mm x 2865mm x 2350 mm, weight: 3000 kg. Defects: Screen, ball bearing of the Z-axis.

Description: main engine power: 3 HP serial number: 6S25 consisting of 5 lower drilling units with 11 + 11 spindles each. Wheelbase 32 mm drilling blocks swivelling from 0 to 90 degrees motor power 3 HP at 2800 rpm each maximum width horizontal drilling 3200 mm minimum width 260 mm 6 vertical pneumatic clamps automatic conveyor group with stop and pneumatic reference squaring device maximum speed 43 m + / min installed power 16,5 kW, 400 V, 50 Hz, 35 amp, 3 phases serial no. 6S25 dimensions in mm: approx. 5000 x 4400 x 2000 , weight in kg: approx. 5000 serial number: 6S25, working width min.: 260 mm, working width max.: 3,200 mm, total power approx: 16.5 kW, Approx. Onsite Dimension. (l x w x h): 5,000 x 4,400 x 2,000 mm, weight approx.: 5,000 kg

Description: Maximum workpiece size: 600 mm . Table depth: 320 mm Spindle Quantity: No. 35 Approx. Onsite Dimension. (l x w x h): 1,500 x 1,200 x 1,500 mm, weight approx.: 700 kg

Description: Machine with possible inclination up to 45°. Maximum travel along the drilling axis: 75 mm Maximum machinable width: 600 mm , Maximum stroke in depth: 165 mm Machine equipped with No. 35 vertical spindles, powered by two ICME electric motors. Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 1,400 mm, weight approx.: 400 kg

Description: • CNC machining centre (3-axis) • Serial number AL5632 • Total installed power 20 KW • Working area approx. 2600 x 1150 mm • Panel passage height 180 mm • Travelling way X-axis: approx. 3000 mm, Y-axis: 1465 mm, Z-axis: 280 mm • Maximum travel speed in the axes direction x-y-z: 50-40-22.50 m/min • Tool magazine with 10 positions (some elastic nippers are broken) • Electro spindle SCM ISO-30-LD: power 6.60 KW, automatic tool change, for ISO 30 tool holder • Vertical milling group 6.60 KW-max. 12000 rpm, manual tool change • Saw unit to groove in X direction • Vertical drilling spindles in X-axis direction: 9 • Vertical drilling spindles in Y-axis direction: 7 • Horizontal drilling spindles in X-axis direction: 2 + 2 • Automatic lubrication • Remote control panel • 8 consoles with 22 vacuum suction cups total • 4 lifting modules for heavy wo ...

Description: • CNC machining centre • Serial number AL5132 • Total installed power 20 KW • Useful working area approx. 2700 x 1000 mm • Maximum travel speed in the axes direction x-y-z: 50-45-22.50 m/min • , 2 x vertical milling unit with manual tool change • Saw unit to groove • Vertical drilling spindles in X-axis direction: 6 • Vertical drilling spindles in Y-axis direction: 5 • Horizontal drilling spindles in X-axis direction: 1 + 1 • Horizontal drilling spindles in Y-axis direction: 1 + 1 • NUM numerical control • Remote control panel • 6 consoles with 2 vacuum suction cups each • BECKER KVT 3.100 vacuum pump with capacity 100 m³/h Approx. Onsite Dimension. (l x w x h): 5,500 x 2,800 x 2,500 mm, weight approx.: 2,900 kg

Description: • CNC machining center • Serial number AA2/002228 • Total installed power approx. 25 KW • Maximum programmable speed in x-y-z axis directions: 120-80-30 m/min • Workpiece length from 250 mm up to 3000 mm (with piece handling) • Workpiece length from 250 mm up to 1950 mm (without piece handling) • Workpiece width from 70 mm up to 1300 mm • Workpiece thickness from 10 mm up to 80 mm (machining a single piece) • Workpiece thickness from 10 mm up to 60 mm (30 + 30 mm)(machining 2 overlapping pieces) • Maximum workpiece weight 100 kg • Input table with approximate dimensions 2430 x 850 mm, mobile workpiece, clamping with grippers, driven belt output table • Identical upper and lower equipment to machine the part simultaneously on both sides: • 1 - Electrospindle: power 7.50 KW-max. 24000 rpm, for HSK F63 tool holder • 2 - Swiveling saw group to groove  ...

Description: Serial number AL1950 Documents: use and maintenance manual, programming diskette Approx. Onsite Dimension. (l x w x h): 4,000 x 2,000 x 2,000 mm, weight approx.: 2,500 kg

Description: Min. panel length 150 mm Max. panel length 800 mm Min. panel width 230 mm Max. panel width 3200 mm Max. forward feed speed 70 m/min No. Top clamps 4 no. bottom vertical units 6 , motor power 1.3 KW r.p.m. 7000 RPM No. injectors 6+6 No. storage tank 2 Item inserted , wooden dowels , wooden dowels 8/10 mm TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

4 axes machining dimension max Y1650 mm - X4600 mm Machining in height Z180 mm 14 position tool magazine 8 SCHMALZ brackets the machine is plugged in, testing is possible

This MORBIDELLI Universal 3012 TV Universal Machining center was manufactured in the year 2008. It is equipped with a CNC XILOG Plus control unit and has 3 axis.

- Work surface 3050 x 1360 mm - Machining height 180 mm - Electrospindle 10 HP ISO 30 rapid 8 - 6 position tool tray - saw diameter 150 mm 0-90 ° - 18 independent vertical spindles - 4 opposite horizontal spindles in Y - 2 opposing horizontal spindles in X - 6 working beams with 18 suction cups - Xilog management - 100 mc/h vacuum pump - Safety system with bumpers - CE standards - fully functional 7 -regular service

Manufacturer: Morbidelli, Type: U 50, Year: 1991, Control: Num, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Working range X: 3150, Working range Y-axis: 1300, Working range Z: 60, C axis: no, Pendulum processing: yes, Min.-max. workpiece length in mm: 150-3150, Min.-max. workpiece height in mm: 10-60, Number of milling spindles vertical: 2, Tool adaption system: Schnellspansystem, Milling engine 1 hours power: ca.4,4, rpm 1): 12000/18000, Milling engine 2 hours power: ca.4,4, Number of tool changers: keine, Horizontal drills-X: 2, Drill horizontal Y: 2, Traverse table: yes, 2 station allocation: yes, Stops in the table front: 2 reihen, Vacuum pumps m³/h: 100, Saw unit: yes, Portal machine: yes, machine ready for demonstration: yes, Available: sofort, Year :1991

Fabricant: Morbidelli, Type: Auteur 600, Année: 1999, Vitesse d’alimentation max m/min: 50, Plage de travail X: 3000, Plage de travail Axe Y: 915, Axe C: oui, Nombre de broches de fraisage verticales: 1, Système d’adaptation de l’outil: ISO 30, Moteur de fraisage 1 heures de puissance: 7,5, U/min 1) Vertikal: 1500 - 1800, Nombre de changeurs d’outils: 1, Nombre d’outils par magasin d’outils: 10, Perceuses verticales-X: 18, Perceuses horizontales-X: 6, Table de traverse: oui, Pompes à vide m³/h: 100, Année:1999

Manufacturer: Morbidelli, Type: 503, Year: 1998, Control: Tria 7000, Feeding speed max m/min: 75, Working range X: 3200, Working range Y-axis: 1050, Working range Z: 80, C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO 30, Milling engine 1 hours power: 7,5, rpm 1): 18000, Number of tool changers: 1, Number of tools per tool-magazine: 8, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: yes, Stops in the table front: yes, Stops in the table rear: 4, Vacuum pumps m³/h: 120, Tool clamping system: ISO 30, Saw unit: Starr in X Richtung, Radial arm machine: yes, Year :1998

Fabricant: Morbidelli, Type: U 50, Année: 1991, Contrôle: Morbielli, Vitesse d’alimentation max m/min: 200, Plage de travail X: 3590 , Plage de travail Axe Y: 1800, Plage de travail Z: 55, Moteur de fraisage 1 heures puissance: 5 - 7,5 PS, rpm 1): max 18.000, Perceuses verticales-X: 14, Perceuse verticale Y: 16, Perceuses horizontales-X: 2, Perceuse horizontale Y: 2, Table transversale: oui, Année :1991

Manufacturer: Morbidelli, Type: Author 600, Year: 1999, Control: Num 1040/X-Log, Work piece width min-max mm: 1680, Min.-max. workpiece length in mm: 4400, Min.-max. workpiece height in mm: 10-80, Working range X: 4829, Working range Y-axis: 1774, Working range Z: 180(280), C axis: yes, Number of milling spindles: 1, Tool adaption system: ISO, Milling engine 1 hours power: 7,5, Number of tool changers: 2, Number of tools per tool-magazine: 4 + 8, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 12, Drill vertical Y: 6, Horizontal drills-X: 4, Drill horizontal Y: 2, Traverse table: yes, 4 station allocation: 4, Stops in the table front: yes, Stops in the table rear: yes, Vacuum pumps m³/h: ca.60, Saw unit: schwenkbar, Radial arm machine: yes, Year :1999

Fabricant: Morbidelli, Type: Auteur 600, Année: 2000, Plage de travail X: 4400, Plage de travail Axe Y: 1300, Nombre de broches de fraisage: 2, Système d’adaptation de l’outil: ISO 30, Moteur de fraisage 1 heure puissance: 10 PS, Moteur de fraisage 2 heures Puissance: 9 PS, Nombre de magasins d’outils: 1, Nombre d’outils par magasin d’outils: 10, Perceuses horizontales-X: 6, Table de traverse: oui, Pompes à vide Qté: 1, Pompes à vide m³/h: 100, Perceuse verticale: 18, Machine à bras radial: oui, Année:2000