DÖRRIES machine à vendre

Année de construction 2008 Système de contrôle Siemens 840 D Diamètre de rotation. [millimètre] 2400 Longueur de tournage [mm] 2145 Généralités: Année de construction 2008 Système de contrôle Siemens 840 D Diamètre de tournage 2 400 mm Hauteur de rotation 2 145 mm (élévation du support 900 mm) Table de la machine : Table d’engrenage technologique, 2 étages Puissance d’entraînement 100 kW Couple 39 700 Nm Opération de fraisage à couple de maintien 44 800 Nm Vitesse 250 tr/min Diamètre de la plaque frontale 2 200 mm Charge de table max. 17 000 kg Axe C 0,001 Matériel de perçage et de fraisage : Broche d’engrenage de technologie Vitesse max. 3 000 tr/min Puissance 37 kW Couple 1 230 Nm Porte-outil Capto C8 Barre transversale: Course verticale 1 000 mm Espacement des grilles 100 mm Distance entre la broche de fraisage et la table ...

Table de serrage Dârries Diamètre: 1.600 mm Hauteur: 1000 mm Poids: 4.200 kg

Condition: Très bon, Contrôle: CNC SINUMERIK 840 Nouveau dans: 1986/2005 Localisation: notre maison de travail à Rudniki - Pologne Lathe est équipé d’un axe C et d’un outil entraîné, changeur de palette Données techniques : Diamètre maximum : 2200 mm Hauteur de rotation maximale : 1800 mm RAM: 1500 mm Moteur principal: 75 kW Vitesse de fuseau: 45-1350 tr/min Moteur à fuseau: 15 kW Poids de pièce de travail max: 12 000 kg Changeur de palette (3 palettes): Magazine d’outils : 16 pièces pour tourner 16 pièces pour le forage Sonde d’outil automatique Sonde de détail automatique Espace moteur requis : 11000 x 11000 mm

faceplate diameter:1800 mm swing diameter:2000 mm turning height:1170 mm z-axis:1000 mm cross rail adjustment - vertical:800 mm faceplate speeds::2,5 - 280 workpiece weight:12 t feeds:1 - 6000 mm/min max. torque on the faceplate:50000 Nm total power requirement:85 kW weight of the machine ca.:41 t dimensions of the machine ca.:5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing - various tool holders

faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor

faceplate diameter:1400 mm swing diameter:2000 mm turning height:1500 mm main drive:80 kW faceplate speeds from - to:1 - 355 U/min milling motor:37 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:500 mm ram head dimension:240 x 240 mm max. ram stroke:1250 mm weight of the machine ca.:50 to total power requirement:133 kVA dimensions of the machine ca.:11 x 5 x 6,4 m Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories

faceplate diameter: 1000 mm swing diameter: 1500 mm turning height: 1700 mm Control: Siemens type: 810 transmission ratio: 2 turning speeds: 500 U/min Tools changer for 12 tools: paper filter: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 1600 mm turning height: 1285 mm Control: Siemens 840 D turning speeds: 400 U/min x-travel: +- 950 mm z-travel: 1100 mm workpiece weight: 9000 kg power capacity: 80 kW Torque: 19900 Nm table diameter: 1400 mm weight of the machine ca.: 42 t dimensions of the machine ca.: 7600 x 5200 x 5400 mm Dörries 7, Machine number V-800294 Crossbeam: -Cross beam travel: 600 mm Ram: -Ram cross section: 250 x 250 mm (immersion diameter: 340 mm) -Ram travel 1100 mm Equipment/accessories: -Tool magazine -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2900 mm turning height: 1650 mm slides vertical travel: 850 mm side head - cross travel: 900 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2800 mm turning height: 1195 mm Control: Siemens 840 D turning speeds: 224 U/min x-travel: +-1600 mm z-travel: 1100 mm machine table: diameter: 2500 mm workpiece weight: 25000 kg power capacity: 80 kW Torque: 35900 Nm total power requirement: kW weight of the machine ca.: 66,5 t dimensions of the machine ca.: m faceplate diameter: mm Dörries 6, Machine no. V-800293 - Fixed crossbeam, no tool drive Ram -Cross section of ram: 250 x 250 mm -Travel ram: 1100 mm Equipment/accessories: -Tool changer revolver 4-times in the ram -Own filter system -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2400 mm turning height: 2445 mm Control: Siemens 840 D feed range: 0-18000 mm/min table diameter: 2000 mm max. table load: 17000 kg total power requirement: 100 kW weight of the machine ca.: 75 t dimensions of the machine ca.: 10.000 x 5.500 x 7.100 mm Dörries 2, machine number V-800289 with hydraulical chuck, without milling function Crossbeam: -Travel crossbeam: 1000 mm (100 mm steps) -Crossbeam support travel: ± 1350 mm Ram : -Cross section of ram: 250 x 250 mm (minimum immersion diameter:380 mm) -Travel ram: 1500 mm Equipment/accessories: -No driven tools -Tool changer/head changer 72 times -Hydraulic chuck -BRANKAMP monitoring -REXROTH hydraulic unit -Chip conveyor -Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

swing diameter: 2400 mm turning height: 2145 mm Control: Siemens 840 D turning speeds: 250 U/min Speed range - c-axis: 0,0025 - 3,15 U/min Smallest input increment of the c-axis: 1/1000 ° speed steps of main gearbox: 2 x-travel: +-1350 mm z-travel: 1500 mm Positioning of the crossbar - grid spacing: 100 mm : 400 mm/min machine table: power capacity: 100 kW diameter: 2200 mm Torque: 35700 Nm workpiece weight: 17000 kg Right crossbar support: bit feeder section: 250 x 250 mm Immersion diameter: 340 mm x-travel: +- 1350 mm z-travel: 1500 mm Drilling and milling device: Distance of m.spindle to upper edge of t. table: 62,5 mm power capacity - milling spindle: 37 kW total power requirement: kW weight of the machine ca.: 62,5 t dimensions of the machine ca.: m crossbar adjustable! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1000 mm swing diameter: 1400 mm turning height: 1100 mm Control: Siemens type: 840 D Shop Turn Tool changer: x-travel: 2000 mm z-travel: 700 mm slide adjustment: 1000 mm Rapid movement: 6000 mm/min turning speeds: 500 U/min : total power requirement: 62 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore for us not binding. We reserve the right to prior sale, it apply only our business and conditions of sale. About Us more than 400 own machines in stock over 12000 m² storage area, crane capacity 70 t more than 10000 articles accessories for your workshop You want to sell machines, production lines or your company, Then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3500 mm swing diameter: 4100 mm turning height: 1400 mm Control: Siemens Slide movement horizontal longitudinal: 2100 slide adjustment: 1300 mm cross rail adjustment: 1300 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm cross rail - adjustment: 600 mm work spindle adjustment: 750 mm Tools changer for 12 tools: total power requirement: 69 kW weight of the machine ca.: 25 t dimensions of the machine ca.: m reconditioned The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1600 mm swing diameter: 2100 mm turning height: 1700 mm Control: R & D type: MTC 4 turning speeds: 280 U/min workpiece weight: 20000 kg Tool changer: 14 Pos. : total power requirement: kW weight of the machine ca.: 2800 t dimensions of the machine ca.: 3,7x3,75x5,1 m Machine is modernized The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1650 mm turning height: 950 mm ram head dimension: 200x200 mm control: Heidenhain type: Manuel Plus 410 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1200 mm swing diameter: 1400 mm turning height: 1250 mm stroke of ram - solid: 750 mm Side head: 650 mm turning speeds: 4-210 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diamètre de la plaque frontale: 1200 mm détraitage: 1400 mm détir de tournage: 1250 mm course de bélier - solide: 750 mm désactive: 650 mm désystage: 4-210 U/min désoitment total de la machine: kW poids de la machine ca.: t dimensions de la machine ca.: m