We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-360 AU Year of production 1995 Automatic operation type Tape cutting tool 5334x38x1.3 mm Max. dime ...
diamètre de coupe: 360 mm Longueur de la bande de scie: mm Largeur de coupe: mm Puissance totale requise: kW Poids de la machine Ca.: T Dimensions de la machine CA.: M ...
Données techniques : - Gamme de coupe à 90 environ 420 mm carré 420 x 420 mm - Dimension de bande de scie 6300 x 41 x 1.3 mm - Vitesse de coupe infiniment réglable 0 x 130 m/min - l’hydrohydre. Levage - Abaissement du cadre de scie guidé par colonne - Réduire la pression infiniment réglable 0 - 10 m/min - Hydr. bâton de serrage de pièce de travail mobile - plus grande largeur d’ouverture de l’aile 480 mm - maximum à travers la hauteur sous la bande de scie 480 mm - Hauteur de support matériel approximative. 700 mm - Puissance totale d’entraînement 400 V / 8 kW - Hydr. Dispositif de serrage de faisceau - Dispositif de refroidissement - Mot. Brosse ...
Scie à ruban Kasto HBA 520 AU surface de scie 350 x 350 mm, charge de table 7000 kg. Machine immédiatement disponible et disponible. Chargement gratuit des camions. ...
Scie à ruban avec surface de sciage 650 x 650 mm, charge de table 8000 kg. Machine immédiatement disponible et disponible. Chargement gratuit des camions. ...
The column saw is designed to cut metals from aluminum and its castings, through non-ferrous metals, to high-quality metals such as stainless steel. The saw has a stable structure and reliable technology for automatic material feeding and cutting, which only takes place at an angle of 90°. The saw is also equipped with a cooling system, which is responsible for cooling, lubrication and protection against corrosion of tools and cut elements. The main materials cut on a frame saw are profiles, shafts, pipes, rods, angles, C-sections, T-sections and other shapes. Producer: KASTO Model HBA-420 Cutting area approximately 420 mm Square cutting surface 420x420 mm Material feeding with aut ...
Scie à ruban haute performance entièrement hydraulique dans la conception la plus lourde, avec lame de scie mobile parallèle, pour la découpe de profilés, de tubes et de matériaux pleins Qualités, y compris les matériaux extrêmement difficiles à usiner (par exemple, Titan, Inconel, Hastelloy) Guidage de l’unité de sciage par deux colonnes carrées verticales avec rails de guidage trempés et rectifiés. Serrage hydraulique de la scie à ruban et précontrainte hydraulique Guides de scie à ruban en carbure. Le matériau est serré par deux étaux de serrage hydrauliques. La longueur d’avance peut être réglée à l’aide d’un compteur d’une résolution de 0,1 ...
cutting diameter: 1020 mm saw band length: 11.430 x 80 x 1,6 mm cutting width: 1,6 mm cutting range: 1020x1260 mm Control: CNC cutting speed: 15-190 m/min power capacity: 11 kW table load: 20 t total power requirement: 20 kW weight of the machine ca.: 21,1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 420 mm saw band length: 6300 mm table height: 700 mm 0: 5,5 kW cutting speed: 20-130 m/min min. cut-off length: 6 mm min. dia.: 10 mm weight of the machine ca.: 2,9 t dimensions of the machine ca.: 2,4x3,3x2,4 m Fully automatic band saw, saw band tension hydraulic, cutting feed continuously variable, material feed hydraulic, automatic feed with horizontal vice. Clamping force: approx. 400-2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 12 meter in-feed rollerconveyor - max workpiece width: 800 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor Depth of throat: 1060 mm Max height of workpiece: 860 mm Length of band saw: 10260 x 80 x 1,60 mm Power needed: 32 kW (100 amp) Weight: 9 ton (only machine)