We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Spécifications Longueur de coupe 3200 mm Largeur de coupe (course de la glissière du programme) 2200 mm 3 tables à coussin d’air 1835 x 645 mm Saillie de lame de scie 62 mm Alimentation du chariot de scie: vers l’avant 6-32 m/min constante vers l’arrière 32 m/min Vitesse du curseur du programme: avant 12 m/min à l’envers 12 m/min Dispositif d’élevage d’angle d’un côté (semi-automatique) largeur de pression min. 100 mm largeur de pression 1300 mm Moteur de scie principale 5,5 kW Vorritzsägemotor 0,55 kW Arrêts pivotants 5 pièces Tables frontales revêtues 1750 x 400 mm 1 pièce (arrêt de mesure manuel/extensible) Tables frontales revêtues 1000 x 40 ...
4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Dis ...
Panel thickness: 12 - 60 mm Feed speed: 18 m/min Edge thickness: 0,3 - 3 mm for coil edges Equipment: Programmable fence at the infeed Squaring device: 2 x 3,0 KW Glue application unit: A34 double edge magazine for 2 coils Lateral pressure rollers, thickness programmable, 1 driven, 2 non-driven rollers End trims HL84/85, programmable change straight/chamfer, 2 motors 0,18 kW Rough trimming: 2 x 0,55 KW Contour trimming FK 13, 2 x 0,55 KW Profile scrapers PN10 Flat scrapers Buffing unit Controlls: HOMATIC NC21
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleanin ...
Forderband - Élimination des déchets de bois Bracelet en acier inoxydable, avec support Bande horizontale : 1 500 mm Longueur totale 3 200 mm Ceinture d’escalade : 2 600 mm à 1 600 m d’altitude ...
Roller chain, drive chain -Length: 5 m -08B-1 roller chain -1-way 1/2 x 5/16 -Quantity: 2x pieces available -with rubber profile -Price: 45 euros/m -Weight: 6 kg/per 5 m ...
Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleanin ...
Workpiece thickness: 8 - 90 mm, electronically adjustable Feed rate: 18-32 m/min frequency controlled Edge thickness: 0.3 - 3 mm for roll edges, strips up to 20 mm Equipment: Inlet guide automatically adjustable via the control, extension 500 mm Joint milling unit: 2 x 3.0 KW workpiece preheating Gluing unit A34 edging magazine for roll Pressure zone with 1 driven, 6 non-driven rollers, automatic adjustment from the control Cutting unit WK14, straight, 2 motors 0.8 kW Pre-milling unit: 2 x 1.5 KW, pneumatic adjustment Form milling unit FF 12 automatic, 2 motors 0.4 kW radius/phase milling unit FF12 automatic 4 motors 0.4 KW universal milling aggregate controlled UF11, 4 kW Profile scrapers P ...
Fabricant: Homag , Type: KAL 310/8/A20/S2, Année: 2005, Contrôle: PC 22, Largeur de la pièce min-max mm: min 55/100, Min.-max. hauteur de la pièce en mm: 12 - 60, Min-max alimentation m/min: 18 - 24, Einlauflineal gesteuert: oui, Prémoulage: 2 x 3kW, Application d’agent de séparation: oui, Coil magazine: 2, Mitre stations: Fase / Gerade, Pré-fraisage: 2 x 1,5 kW, Fraisage conique: FK 13 - 8Fach, fraisage rayon: 4 kW, Type de traçage d’angle: MN 21, Racleur plat: FA 11, Pièce de collage EVA: A 20, Courroie/rouleau à pression supérieure: Bande, Réalimentation de la pièce: vorinstalliert, TEXTE LIBRE: Frreiplatz, Année :2005