We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Description Working hours: 73.000h New pump. ...
Krauss Maffei KM 200-1000 CX Year of production - 2021 Fully hydraulic locking system. MC 6 control system based on an industrial computer in real-time Ethernet technology, equipped with an integrated 21.5 ″ control panel with a color touch screen. Plasticizing system 1 complete plasticizing system for thermoplastics with a screw diameter of 55 mm, with back-lock and open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Closing unit - Mold clamping force: 2000 kN - Mold opening force: 101 kN - Mounting plate dimensions (h x v): mm 915 x 915 - Clearance between columns (h x v): mm 560 x 560 - Mold opening stroke: mm 700 - Minimum ...
Machine à moulage d’injection de Krauss Maffei Type: KM 180-1000 C3, Contrôle de la batterie: MC 4 Modèle: 1999 Unité de fermeture Force de clampage t: 180 Voie d’ouverture mm: 700 Holm taille mm: 560 x 560 Hauteur d’installation min/max mm: 600 Taille de la plaque: 915 x 915 Unité de pulvérisation Diamètre de vis mm: 55 Spray poids gr: 476 Volume de pulvérisation cm3: 523 Barre de pression de pulvérisation : 1904 Dimensions et poids Dimensions LxWxH m: 5.6 x 1.9 x 2.2 Poids machine Kg: 9.700 Autres nouvelle batterie Euromap12 à pompe 2013
Description Working hours: 47.000 ...
Closing unit Clamping force [kN] 2500 Dimensions of mounting plates (hxv) [mm] 1000x950 Clearance between columns (hxv) [mm] 735x685 Min./max. mold height [mm] 250 - 600 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 383 Injection pressure [bar] 2304 Electrical and hydraulic equipment Rated power of the pump motor [kW] 36.1 Heater power [kW] 29.2
Krauss KM 1000-5700 M Injection Moulding Machine The machine is not in used after the maintenance was done 3-4 years ago.Plastic parts (some gaskets and O-rings) will need to be overhauled due to waiting time. Last service history: It was stated that there was a problem with the injection ratio. It has been reported that there is no electricity to the proportional valve. The electronic card has been sent to the service. In the service check, we were told that the card was working without any problems. To sum up, it needs some maintenance
Krauss Maffei KM 300-1000 CX injection molding machine Year of production - 2010 Fully hydraulic closing system. MC 5 control system with color monitor, integrated control panel and built-in disk drive. SP 1000 plasticizing system complete plasticizing system for thermoplastics with a screw diameter of 50 mm, with a return lock and an open nozzle Nozzle radius 15 mm, nozzle opening 3 mm. Closing unit – Mold clamping force: kN 3000 – Mold opening force: kN 169 – Dimensions of the mounting plate (h x v): mm 995 x 1050 – Clearance between columns (h x v): mm 630 x 630 – Mold opening stroke: mm 820 – Minimum mold height: mm 330 – Opening width: mm 1150 – Ejector str ...
Clamping force [kN] 3500 Dimensions of mounting plates (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 min./ max. mold height [mm] min 380 Maximum opening width [mm] 1300 injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Injection weight [g] 393 Injection pressure [bar] 2304 Electric-hydraulic equipment Pump motor rated power [kW] 75 Dimensions and weight Net weight with control cabinet [t] 15.5 Dimensions (L x W x H) [m] 6.79 x 2.17 x 2.25
Clamping/injection matrix Clamping force [kN] 3500 Mounting plate dimensions (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Shot weight [g] 393 Injection pressure [bar] 2304 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 6,79 x 2,17 x 2,25
Clamping force [kN] 3000 Dimensions of mounting plates (hxv) [mm] 995x1050 Clearance between columns (hxv) [mm] 630x630 Min./max. mold height [mm] min 330 Maximum opening width [mm] 1150 Injection unit Screw diameter [mm] 55 Injection volume [cm3] 523 Injection weight [g] 476 Injection pressure [bar] 1904 Dimensions and weight Net weight with control cabinet [t] 12.5 Dimensions (length x width x height) [m] 5.97 x 2.04 x 2.36