Numéro de l'article: 163913525 est supprimé de la base de données!

10 similaires machines:

revendeur
agréé
Machine: EOS P380
utilisé
Vendeur: Land-de AMIKON GmbH
Emplacement:: 46325 Borken

Eos EOSINT Nous proposons ici un système de frittage laser en plastique Eos EOSINT. Les éléments suivants sont inclus avec le système EOS P380 Conteneurs d’espace d’installation Récipients en poudre Conteneur de débordement Refroidisseur: Termo TEK Termochiller Type: P411-12448-1 3DM 8 Zones Chauffage de la chambre de traitement 250C Chaque zone réglable individuellement, champ de température homogène ± 1C Kelvin 350mm x 350mm x 610mm Sannung 3/N/PE/ 400V AC Fréquence 50 Hz Valeur actuelle 8 kW Fusible 32 A MAX Power Laser 100 W Classe laser ouverte 4 Classe laser Fermé 1 Poids 850 kg Type: EOSINT P 380 Condition: utilisé Étendue de la livraison: (Voir p ...

Machine: EOS Powder AlSi10Mg
Année de construction: 2024
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

EOS AlSi10Mg for sale: 1x used, sieved condition, 13x 10KG barrels, 69.00 € per barrel with 10KG ...

  • plus d'information

Machine: EOS Formiga P100
Année de construction: 2010
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

EOS P100 en très bon état, la machine a toujours été entretenue, dernier entretien en 02/2023. Le matériau sur la machine est PA2200. ...

  • plus d'information

Machine: EOS M280
Année de construction: 2013
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

Used EOS M280 Direct Metal Laser System for sale., laser type: Yb fiber laser, 200 watts, precision optics: F-Theta lens, high speed scanner, scanning speed: up to 7.0 m/s, Layer thickness: 0.1-0.5mm, Installation space in mm (x/y/z): 250x250x325, building material: Light metal, stainless steel, tool steel, super alloys, support material: Not mandatory, communication: LAN (Ethernet), Machine dimensions in mm (w x d x h): 2200x1070x2290, Recommended pitch size in m: 4.8x3.6x2.9 minimum, Weight in kg: about 1250, Variable focus diameter: 100 - 500 microns, Power supply: 32 A, Power consumption: maximum 8.5 kW / typically 3.2 kW, Nitrogen generator: integrated, compressed air requirement: 7,000 ...

Machine: EOS Precious M080
Année de construction: 2016
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance in 10/2023, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 k ...

Machine: EOS Precious M080
Année de construction: 2015
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance unknown, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 kg,  ...

Machine: EOS Precious M080
Année de construction: 2015
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

The high-end PRECIOUS M 080 system from EOS was developed for the additive manufacturing of precious metal parts for the watch and jewelry industry. Designs can be realized within a few hours and without investing in tools. The system builds the parts layer by layer, melts fine metal powder with a laser and creates extremely complex shapes such as free-form surfaces, hollow shapes and moving parts., The machine offered is fully functional., - Last maintenance in 10/2023, - Machine parameters for red, white and yellow gold, technology: DMLS (Direct Metal Laser Sintering), Construction volume: Diameter 80 x 95 mm, Dimensions machine unpacked: 800 x 950 x 2250 mm, Weight machine unpacked: 580 k ...

Machine: EOS Formiga P110
Année de construction: 2016
utilisé
Vendeur: Land-de Firma Lars Holfort
Emplacement:: düsseldorf

We are selling an EOS Formiga P110 from 2016 on behalf of a customer. The machine is in perfect condition, last serviced 08/2023 by EOS. The machine comes with a few parameter sets and runs perfectly with PA12, PA12GB and all TPU types., - Laser hours as of 01.07.2024: 8787.23h, - 2x removable frames, - Squeegee renewed, - Heating plug upgrade to new version (round), - Some parameter sets, Installation space in mm (x/y/z): 200 mm x 250 mm x 330 mm (minus pyrometer measuring spot), build speed: Up to 20 mm height/hour, Layer thickness: 0.06mm, 0.1mm, 0.12mm, laser: CO2, 30W, precision optics: F-Theta lens, scanning speed: Up to 5m/second, Power supply: 16A, 2kW, Nitrogen generator including e ...

revendeur
agréé
Machine: EOS SLS P-385
Année de construction: 2005
utilisé
Vendeur: Land-de GINDUMAC GmbH

This 3D printer was manufactured in 2005. It features a CO2 50W laser and an effective building volume of 340x340x620mm. The machine can achieve a building speed of 10-25mm height/h with a scan speed up to 5 m/s. It weighs 1,060 kg and measures 1,840x1,175x2,100mm. Optional side equipment includes a Laser cooler, sieving station, and sandblaster. For more information about this 3D printing machine, please reach out to us.

Machine: NEGRI BOSSI SACMI 1300 Ton VH1300 120mm
Année de construction: 2014
utilisé
Vendeur: Land-us Optimisense LLC
Prix: 1 USD

NEGRI BOSSI - SACMI 1300 Ton HIGH TONNAGE Machine à mouler par injection Année de fabrication 2014 Modèle BI-POWER VH1300 /12100 Vis 120mm Volume d’injection calculé 7351 cm3 Poids de tir 6689 Grammes Espace entre hxV Tie Bars 1400 x 1200 Excellent état, peut être inspecté et vu en production

Vous ne trouvez pas votre machine utile? envoyer demande à tous les concessionnaires (aucune inscription nécessaire)