: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software s ...

Geka Hydracrop 110/SD punching machine Selling due to need for space Ask us for anything ...

• plus d'information

Machine robuste avec grande projection Capacité de poinçonnage 1100 kN max. diamètre de la capacité de poinçonnage 40 x 20 mm, Projection 610 mm Acier plat jusqu’à 600x15 mm ou 400x20 mm Angle 152x152x13 mm Acier rond 50 mm Puissance d’entraînement env. 9 kW Course par minute 28 / course = 20 mm Course max. 80 mm Poids env. 3300 kg Incl. Grande table de support pour poinçon 700 x 550 mm Station d’entaillage avec table 550x350 mm butée de contact électrique, 2 pédales de commande Timbres et matrices divers Manuel, Conformité CE

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was cr ...

IRON WORKER (Universal Punching Shear) (Punching capacity) Punching capacity 70 Tons Diameter 28 x 20mm Thickness (Diameter 28 x 20mm thickness) Max cutting thickness in plate 20mm (Max cutting thickness in plate 20mm) Angle cutting up to 130x130x130x13 at 90°. Angle cutting up to 70x70x7 at 45°.

Year 2003 Hydraulic Power 100 tons Punching capacity Ø 31x26 mm - Ø 100x8 mm Punching gooseneck 625 mm Angle shears 152x152x13 mm Gusset shear 600x15 mm Round and square shears 50 mm Jigger Small and large diameter tool holders Multi-stop punching table Electric stop Large range of punching tools up to Ø 100 mm Weight 4400 kg Very good condition

N° Inv. : 7366 Type : Hydracrop 70- SD Producteur : GEKA Création : 1993 Paramètres: Consommation électrique : 9 kW Col d’impact : 500 mm Poids de la machine : 2400 kg Dimension : 1300 x 2100 x 1800 mm Équipement: 2 pédales  ...

• plus d'information

puncher: 55.0 t round bar steel: 40.0 mm square edge steel: 40.0 x 40.0 mm L-beam: 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.): Ø 40.0 x 10.0 mm shear: flat material: 300 x 15 / 200 x 20 mm total power requirement: 3.0 kW weight: 1320 kg range L-W-H: 1600 x 800 x 1680 mm good condition - barely used () current new price approx. 18.600 euros Special price on request Furnishing: - electro-hydraulic profile steel shear with 4 work stations Flat steel scissors Profile steel scissors Hole punch Notching station - electrical contact length stop - continuous stroke adjustment - Support table at hole punching & notching station including sliding stops - 2x freely movable ...

Cisailles en acier profilé combinées et perforatrice GEKA type HYD 80 / Hydracrop 80/A Masch. N° 9566 Année de fabrication env. 2000 Force de poinçonnage 80 tonnes. Saillie 300 mm Poinçonnage jusqu’à 40 mm dans la tôle de 14 mm Cisailles à matériaux plats 450 x 15 mm Cisailles à acier d’angle 130 x 130 x 13 mm Cisailles à 4 pans 45 x 45 mm Cisailles à matériaux ronds 45 mm Encocheuses rectangulaires jusqu’à 12 mm Puissance du moteur 5,5 kW Raccordement au réseau 400 Volt, 50 Hz arrêt avec el. Déverrouillage de levage 500 mm - Table de travail avec butée pour le dispositif de perçage 550 x 380 mm - Hauteur de travail du dispositif de perçage 1100 mm - Table de trava ...

Description: Shears for irons: 300 x 15 mm flats: 200 x 20 mm Punching: Ø 40 x 10 mm AND Ø 20 x 20 mm. Shears for l profiles at 90 º : 120 x 120 x 10 mm Shear for bars: Ø 40 mm Y □ 40 mm Rectangular shear: 90 x 42 x 10 mm Versatile, economical punching shear with 2 independent hydraulic cylinders, 2 stations and 5 workstations: - Punching (550 kn power) - Notching - Shears for l sections (1100 kn power) - Shear for flat bars - Shear for round Ø and □ square bars - Machines operated by two cylinders. - 5 workstations equipped with tools for cutting l , ø and □ bars, rectangular notching and punching. - Quick punch change. - Flat-iron cutting table with adjustable guides. - 2 simul ...