Generator set new diesel 40 kva 3 phase / Recarda diesel engine, electric start, electronic display, 3 phase 400/230v2300x1000x1000 mm1000 kguncheckedloaded on truck

Length: 50 cm, width: 20 cm, for 2.5 - 6 t excavators,

1 set of weld-on hooks suitable for Kramer large mount

NEW, 1 set of weld-on hooks / coupling hooks / weld-on parts suitable for JCB 520-50 attachment

with 90 cm tines

NEW, suitable for CAT TH407

Ripper tooth - ripper tooth with various mounts suitable for Martin, Geel, Winkelbauer, Baumaschinentechnik, Lehnhoff, Verachtert, Miller, Oilquick and many more. for excavators from 1t to 35t Demolition tooth made of HARDOX400 with replaceable tooth, remaining parts made of S355I2+N steel listed price is for the 1-2t excavator version

€ 190,- JCB 406 and JCB 407 Toggle hooks, weld-on parts, weld-on hooks

1 set of welding hooks with CAT attachments, other attachments such as Bobcat, Merlo, JCB, Manitou, Kramer, Schäfer, Weidemann etc. available

1 set of welding hooks, with Volvo attachment

Overall length 110 cm, diameter 13 cm, pointed chisel suitable for hammer HS1500 or HS1600, Year of construction: 1

Système de tension de barre - Système de post-tension DYWIDAG 4 systèmes de précontrainte pour l’acier d’armature Force de pression 60 tonnes pour les types de tiges jusqu’à WR 32 Course du piston 50 mm Surface du piston 132,54 cm² Pression de service max. 500 bar Longueur du jack 401 mm Poids total des 4 presses 160 kg

Technical data according to the manufacturer: Lifting system: Hydraulic Lighted area: 6'000m2 Lumen: 12,000 Mast rotation: 340 degrees Maximum height: 8 m Wind stability: 80 km/h Power output 2.2 kW Voltage 230 V Read operating hours approx. 103 with vehicle licence3100x1300x2600 mm1200 kguncheckedloaded on truck

Technical data according to the manufacturer: Lifting system: Hydraulic Lighted area: 6'000m2 Lumen: 12,000 Mast rotation: 340 degrees Maximum height: 8 m Wind stability: 80 km/h Power output 2.2 kW Voltage 230 V Read operating hours approx. 137 with vehicle licence3100x1300x2600 mm1200 kguncheckedloaded on truck

Two pieces, transport rollers for tamper, without further accessories550x600x300 mm8 kguncheckedloaded on truck

Voltage 230 V With sanding pads, diameter approx. 430 mm1100x600x1400 mm30 kguncheckedloaded on truck

Load lifting magnet, load capacity 600Kg, see pictures.270 x 120 x 120 mm22 kgnever used/newloaded on truck

Professional electric chain hoist Maximum capacity 300 kg. Voltage 230 volts. Maximum lifting height 300 cm. Lifting speed 300 cm per minute. Chain diameter 5 mm.400 x 200 x 600 mm15 kgnever used/newloaded on truck

Load lifting magnet, load capacity 1000Kg, see pictures.320 x 180 x 200 mm31 kgnever used/newloaded on truck

Load lifting magnet, load capacity 300Kg, see pictures.290 x 100 x 100 mm16 kgnever used/newloaded on truck

The rope hoist is supplied as standard with: Bracket for suspension Remote control with up / down. Emergency stop. Load capacity in kg 800/400 kg Stroke 6/12 mm Lifting speed 5/8 m / min Power 1.25 kw Connection voltage 230 V. Weight 21 kg Dimensions L x W x H 420 x 180 x 280 mm420 x 180 x 280 mm21 kgnever used/newloaded on truck

Professional electric chain hoist Maximum capacity 500 kg. Voltage 230 volts. Maximum lifting height 300 cm. Lifting speed 280 cm per minute. Chain diameter 6,3 mm.500 x 350 x 600 mm20 kgnever used/newloaded on truck

Lifting magnet, load capacity 1500Kg, see pictures.440 x 220 x 250 mm45 kgnever used/newloaded on truck

Lifting magnet, used Load capacity 3000Kg See pictures.450 x 200 x 200 mm80 kguncheckedloaded on truck

avec une largeur d’ouverture de 100 cm, une capacité de charge de 800 kg, de nombreuses autres versions disponibles, également disponibles avec d’autres plaques à changement rapide et un rotateur

2 pieces Short Pitch - Premium smooth running chains

NOUVEAU - 2024 - Grappin de démolition et de tri GRP150, Poids : 145 kg, Débit d’huile dans la pelle 15 l/min, adapté aux pelles de 1,5 à 4 t, avec plaque de montage, disponible avec divers enregistrements tels que l’enregistrement Martin & Lehnhoff

NOUVEAU, année de construction 2022, avec rotateur 360Â, poids propre 1570 kg, pour pelle 12 - 20 t

NOUVEAU, poids net de 140 kg, adapté aux pelles de 1,5 à 4 t, débit d’huile pour les pelles 15 l/min, avec plaque de montage, disponible avec différents supports tels que les supports Martin & Lehnhoff

Capacity 500 kg, increment 100 g300 x 650 x 300 mm5 kguncheckedloaded on truck