Machines de traitement du caoutchouc

Presse (n°1) Bouleversement Fabricant: Agila Force de fermeture: 850 Ton Année 1997 hydraulique Plateaux à vapeur : 3 2 cavités (ouverture de 250 mm) Taille des plaques chauffantes: 1100 x 1400 x 76 mm Diam. piston 650 mm Pression hydraulique: max. 250 BAR Réservoir hydraulique: 500 L Manuel complet inclus Taille presse 2400 x 1400 x 4200 mm (L W H) Poids +/- 23.000 kg

Usine de rechapage de pneus Installation de rechapage complète pour les pneus poids lourds rechapés à froid Production : jusqu’à 200 pcs/jour Équipement: Pos.1 Système de rails « Helm 500 » Cadre/Supports Fabricant TRM Longueur du rail env. 110 m, hauteur du rail env. 2 m 76 crochets avec rouleaux 3 stations de traitement avec raccords d’extraction Tunnel de pulvérisation pour solution de caoutchouc, y compris l’extraction Année de construction : 2008 Pos. 2. Machine à dégrossir Matteuzzi RAS 90 DC 4 défaut (arbre de transmission défectueux) Fabricant : Matteuzzi Modèle : RAS 90 DC4 Numéro de machine : 522 Année de construction : 2004 Pos. 3. Rugisseur Matteuzzi RAS 98 E ULTRA (comme neuf) / Dispositif d’entraînement du centre de formation Fabricant : Matteuzzi Modèle : RAS 98 E Ultra Numéro de machine : 522  ...

Machine d’essai de pneus - Balanceur statique pour les pneus passagers. en état de travail! Taille des pneus de 15 à 20 po Ce certifié La mise à disposition disponible- sera envoyé sur demande! Plus de détails voir la description ci-jointe!

Press force max.:: 1.000 kNheating plates:: 480 x 520 mmelectrically heated:: °Cpiston stroke:: ca. 500 mmno. of stages:: 1 Condition: Used, overhauledSpecification: 4-column vulcanising press 480 x 520 mm, used- closing force: 100 t- closing: from top to bottom- heating plates: 2 electric plates- New heating platens- Dimensions of heating plates: 480 x 520 mm- Distance between heating platens approx.: 500 mm- AC motor: 5,5 kW- New electric valves- New control cabinet with Siemens 7 touch panel- SPS system Siemens S7-1200- Frequency converter make Schneider- New cabling- Light curtains in the front operating areaOverhauled according to CE standard safety regulationsOperating and maintenance instructions in GermanWarranty: 1 yearThe data for this ad was created with ModulMWS - the  ...

machine measurements: Länge ca. 12.000 mmmachine weight: -- kgpower capacity: 170 kWCondition: used,Specification: 12m heating duct incl. PCT- length approx.: 12.000 mm- extrusion height: 1.100 mm- extrusion direction: from right to left- belt width: 150 mm- Channel width: 190 mm- At the inlet and outlet there is a 50 kW burner each- In the PCT there is a 70 kW burner- Temperature range: 240°C to 340°C- Heating: gas heated- Belt speed: 2-40 m/min- Control: Siemens S7Relocation date no later than mid-June 2022.The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 21.000 mmmachine weight: -- kgpower capacity: 200 kWCondition: used,Specification: 21m post-heating duct with heat exchanger- length approx.: 21.000 mm- consisting of: 21.000 mm heating channel, incl. heat exchanger- extrusion height: 1.100 mm- Extrusion direction: from right to left- 4x burners with 50kW burner each- Tempering range: 240°C - 340°C- Heating: gas heated- Control system: SiemensHeating duct extension by 2x 3m, 2015- The duct was extended by 2x 3m segments in 2016- The burners of the 21,000 mm system were renewed in 2015The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine measurements: Länge ca. 12.000 mmmachine weight: -- kgpower capacity: 182 kWCondition: used,Specification: heating channel + shock module incl. UHF and PCT Typ: SHF 150-120-1-147-12- length approx.: 12.000 mm- Consisting of: 9.000 mm hot air channel, incl. UHF 3.000 mm shock module with folding infeed conveyor and PCT- UHF power: 4x 3 kW- Temperature range UHF part: 240°C - 340°C- Temperature range shock module: 240°C - 500°C- Shock module with non-driven metal rollers- Extrusion height: 1,100 mm- Extrusion direction: from right to left- At the infeed and outfeed one 50 kW burner each- PCT burner capacity: 70 kW- Heating: gas heated- Control: Siemens S7Relocation date no later than mid-June 2022.The data for this ad was create ...

machine measurements: 3.000 mmmachine weight: -- kgpower capacity: 90 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: 5.000 kNheating plates:: 1100 x 1200 mmelectrically heated:: °Cpiston stroke:: ca. 620 mmCondition: used, overhauled 2021Specification: Vulcanising press 1100x1200 mm, Panel structure, used- closing force approx.: 500 t- Closure: from bottom to top- 2x heating plates: with new resistors- heating plates: electric plates- Dimensions heating plates approx.: 1100 x 1200 mm- clear width between the heating plates approx.: 750 mm- piston stroke approx.: 620 mm- Additional panel for 0-closure between the Plates- New electric valves- AC machine power AC motor: 15 kW- New control cabinet with Siemens 7 touch panel- PLC system Siemens S7-1200- Frequency converter: make Schneider- New cabling 2021- Light curtains at the front- CE marking form 2021- Operating and main ...

Système de refroidissement de bande Cantilever, construit en 2004, largeur de bande 2 fois jusqu’à 120 mm, 1 fois jusqu’à 200 mm, épaisseur 6 à 12 mm, Débit 500 à 800 kg/h

machine measurements: 2.200 x 1.200 x 2.260 mmmachine weight: 1.000 kgpower capacity: -- kWCondition: usedSpecification: automatic control machine for O-rings - second-hand rotary transfer machine with 16 pick-up stations- year of construction approx.: 2011 - pick-up stations: 16- measuring range: ID from 55 - 90 mm cord from 2,5 - 3,5 mm (ID 55 - 70 mm) cord from 2.5 - 4.5 mm (ID 70 - 90 mm)- Part throughput: approx. 3 - 4 seconds per part approx. 900 - 1,200 parts per hour approx. 21,600 - 28,800 parts per day- Technical application: surface defect and crack detection on O-rings- Sorting function: Good, Bad, Undefined- Dimensions LxWxH approx.: 2,200 x 1,200 x 2,260 mm-  ...

machine measurements: 1500 x 2400 x 1150 mmmachine weight: -- kgpower capacity: 12 kWThe data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press force max.:: -- kNheating plates:: 600x600,500x500 mmelectrically heated:: -- °Cpiston stroke:: -- mmno. of stages:: 1-3 Condition: Used,Specification: 5x vulcanising press, second-hand consisting of: 2x make Simpelkamp, 2x make Reinartz, two-daylight presses 1x make Reinartz 1x crane system 1x pedestalsSimpelkamp presses:- Clamping force: 250 t- number of floors: 1- Closing: from bottom to top- Heating plates: 2 electric plates- Dimensions of heating platens: 600 x 600 mm- Distance between heating platens: 530 mm- Hydraulics: 200 bar- AC machine power oil pump: 7,5 kW- Dimensions approx.: 1,300 x 1,000 mm- Unit height approx.: 2,800 - 3,000 mmTwo similar  ...

Bande de mesh pour AUMA / Rotocure nouveau et inutilisé Longueur: 14100mm Largeur: 2250mm

Key data: 4850 kN, 1200 mm

Presse à deux pistons 1200 x 800 Plaques chauffantes 1200 x 1200 mm Force de serrage env. 4850 kN chauffage électrique