Anchura central: 3000 mm Diámetro de rotación: 1800 mm por encima de la cama / 2800 mm por encima del suelo Peso de la pieza: 8.000 kg máx. Mandril de mordazas: Ø 1800 mm Rango de velocidad: 1,8 - 180 rpm. Paso del husillo: 220 mm Lectura digital de 3 ejes: Easson ES-14 Equipado con: - Contrapunto motorizado - Varias herramientas -Instrucciones País de origen: Alemania Potencia del motor: 34 kW Peso de la máquina: 21.000 kg

turning diameter over bed: 5000 mm turning diameter over slide rest: 4000 mm turning length: 22000 mm total power requirement: 36 kW weight of the machine ca.: 53,5 t dimensions of the machine ca.: m Facing and Centering Lathe with plate field - Max. Turning diameter over the bed slide 4000 mm - Max. Turning diameter 5000 mm - Max. Turning length: 22000 mm - Face plate speed range 0.9 - 56 rpm - Faceplate diameter 4420 mm - Max. Workpiece weight between the centers: 20 t - Max. workpiece weight -without tailstock: 12,5 t - Two bed slides with 4500 mm turning length - With plate fields - A roller block - With tailstock Machine was overhauled in Italy in 2014 with stepless speed control. After ...

Type DP 4000 Special facing lathe which has been converted to Siemens CNC for making internal conical threads Chuckdiameter: 3700 mm Siemens 840D Thread inserts are included, these are used to test if the thread has been correctly turned on the workpiece.  ...

• más información

Torno de parte superior plana con marco de placa (torno de alta resistencia) - La máquina fue revisada en Italia en 2014 y almacenada directamente - Nuevos sistemas eléctricos (armario de control, cableado) - Diámetro máximo de giro sobre el carro de la cama 4000 mm - Diámetro máx. de torneado 5000 mm - Longitud máxima de torneado: 22000 mm - Rango de velocidad de las placas frontales 0,9 - 56 1/min - Diámetro de la placa frontal 4420 mm - Potencia del motor principal 30 kW - Par máximo en la placa frontal 61803 Nm - Peso máx. de la pieza entre puntas: 20 t - Peso máx. de la pieza volando: 12,5 t -Dos toboganes de cama con una longitud de giro  ...

faceplate diameter: 3500 mm turning diameter: 4000 mm centre distance: 16000 mm turning speeds: 1,4-74 U/min Rest: 2 tailstock quill taper MT: max. workpiece weight -without tailstock: 6300 kg max. workpiece weight between centres: 18000 kg Plate area: mm total power requirement: 31 kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diámetro de giro: 6400 mmLejos del centro: 18000 mmPerforo del husillo: 220 mmNúmeros de guía de cama: 0Peso entre centros máximo: 80000 kg MACH-id   4069 MAKE       Zerbst Alemania TIPO         DXP 5 AÑO         1987 características técnicas Balanceo en el hueco    6400 mm Distancia entre centros    18.000 mm Peso de la pieza de      trabajo 80.000 kg Diámetro del husillo    220 mm Velocidades / rangos    del husillo 22,4 Rpm Potencia    70 Kw Dimensiones Longitud    25.000 mm Ancho     1 ...

faceplate diameter: 4.000 mm travel -x axis: 4.500 mm travel -z axis: 600 mm control: Siemens Sinumerik 840D feed range: 0 - 8.000 mm/min Head lathe | ZERBST - DP05/W08 Scope of delivery: - Chip conveyor - Hydraulic unit The ZERBST - DP05/W08 has been retrofitted in 2010. The machine is in a well-maintained condition and can be inspected at any time under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DP05W08 | DP05 W08 | DP05-W08 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 3200 mm turning diameter over slide rest: 2400 mm turning length: 15000 mm faceplate diameter: 2600 mm control: Siemens 840 Dsl workpiece weight max.: 80000 kg accuracy +/-: bis/up to: 0,01 mm spindle motor: 110 kW faceplate speeds from - to: 0-50 U/min total power requirement: - kW weight of the machine ca.: 60 t overhauled and modernized 2009 & 2012/2013 equipped with: - CNC control Siemens 840D SL - 2 supports with 1 controller each - 4-jaw face plate - 2 hydraulic steady rests - hydraulic tailstock Machine is dismantled and stored. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning dia. over bed: 3.520 mm turning diameter over slide: 3.000 mm turning diameter over slide: 2.440 mm turning length: 15.000 mm Control: Sinumerik 840 D SL turning speeds: 50 U/min workpiece weight max.: 80.000 kg turning diameter: orig. 3500 / mod. 2400 mm accuracy +/-: 0,01 ° total power requirement: 110 kW weight of the machine ca.: 154,4 t dimensions of the machine ca.: 20,7 x 6,0 m - The modernization (2012) carried out on this machine mainly comprises a new mechanical main gearbox including main spindle drive and the addition of a holding brake plus integration into the existing electrical system. - In the course of the work, it became apparent that the two double-row cylindrica ...

Change gear, change gears, gear -for: heavy-duty lathe Braun Zerbst -Number: 23 pieces change gears -Module: mm -Dimensions: 530/530/H735 mm -Weight: 144 kg ...

• más información