Descripción: |
Cepilladoras de cuatro lados WEINIG Powermat 600 Fenster
máquina usada
Number of spindles: 5 St. Working width: 230 mm Working
height: 120 mm Length of the planing table: 2500 mm Feed
motor: 4 kW Feed speed: 5-30 m/min. Control: Weinig,
MemoryPlus Weinig Powermat 600 with HSK/Powerlock, axial/radial
CNC controlled --------------------------------------------------
Machine is being checked
Short
summary: -------------------------------------------------- 5
spindles with 8,000 rpm 4 x HSK/Powerlock Axial and radial CNC
adjustment of the spindles via control CNC - controlled adjustment
and positioning of the feed
Detailed
description: --------------------------------------------------
Technical data: Working width: 20-230 mm Working
height: 10 -120 mm
Number of spindles: 5
1. Tool
holder -
bottom ----------------------------------------------- Motor
with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000
rpm Tool flight circle: 125 - 145 mm Tool flight circle rebate
cutter: 130 - 160 mm Axial adjustment path: 5 mm Folding
device MarathonCoatin for table insert in front of 1st lower tool
holder
2. Tool holder - PowerLock -
right ----------------------------------------------- Motor
with brake: 11.0 kW Common motor with left tool holder Speed
including high-performance ball bearings: 8,000 rpm Tool flight
circle 40 mm below table level: 93 - 200 mm Tool flight circle 55
mm below table level: 93 - 180 mm Tool flight circle for straight
cutter heads max. 163 mm Max. tool diameter behind stop level: 180
mm Max. throat depth: 35 mm Axial adjustment range: 55
mm Spindle axially and radially CNC controlled
3. Tool
holder - PowerLock -
left ----------------------------------------------- Motor
with brake: Shared motor with the 2nd spindle Speed including
high-performance ball bearings: 8,000 rpm Tool flight circle 40 mm
below table level: 93 - 200 mm Tool flight circle 55 mm below
table level: 93 - 180 mm Tool flight circle for straight cutter
heads max. 163 mm Max. throat depth: 35 mm Axial adjustment
range: 55 mm Spindle axially and radially CNC
controlled
4. Tool holder - PowerLock -
top ----------------------------------------------- Motor with
brake: 7.5 kW Speed including high-performance ball bearings:
8,000 rpm Tool flight circle: 93 - 200 mm Tool flight circle
for straight cutter heads max.: 180 mm Max. throat depth: 35
mm Axial adjustment range: 40 mm Spindle radially CNC
controlled
Divided pressure shoe in front of the upper tool
holder, on the tool flight circle adjustable and swings away from
the tool, spring-loaded.
Pressure shoe in front of, and
discharge after, the upper spindle with electronic Digital
displays, integrated in the memory function or the
PowerCom
Glazing bead removal to the upper spindle,
pneumatically controlled back and forth including stops on the
right spindle recessed to 35 mm for square Groin
removal
5. Tool holder - PowerLock -
below ----------------------------------------------- Motor
with brake: 7.5 kW Speed including high-performance ball bearings:
8,000 rpm Tool flight circle: 93 - 200 mm Max. throat depth:
15 mm Axial adjustment range: 35 mm Spindle radially CNC
controlled
Feed
system ----------------------------------------------- Electro
nic feed, steplessly adjustable with brake: 4 kW, 5 - 30
m/min Feed roller in front of the 1st lower tool is pneumatically
controlled up/down. Durofer pointed tooth rollers (Weinig patent)
with depth limiter and self-cleaning. Adjustment path of the feed
rollers relative to the left tool holder, axial 35 mm Extension of
the pendulum axis compared to the left spindle to 150 mm Reduction
of the feed roller distances to 465 mm, including additional feed
rollers after the upper tool holders and shortened roller
spacing
Machine
electrics ----------------------------------------------- Oper
ating voltage 400 V (voltage range 380 - 420 volts), 50 Hz. All
spindle IE 2 version Electrical design according to DIN VDE 0113,
electrical equipment from Industrial machines EN60204, IEC-204-1.
Other electrical regulations are not taken G4512123 into
account.
Machine stands, tables and
stops ----------------------------------------------- Dressing
table: 2500 mm long (including joining ruler) Manual Waxilite pump
for table resin removal
A powered rubber roller in the
discharge table - 50 mm wide
Printing elements and
guides ----------------------------------------------- Two
side pressure rollers in front of the left tool holder, rotating
and sprung. Lateral pressure roller on the infeed table,
spring-loaded Exhaust plate for narrow glazing beads (20 degrees
inclined)
Machine
operation ----------------------------------------------- Cont
rol: MemoryPlus To save the setting values of profiles. Tool
holder axes with electronic digital displays. Graphical
representation enables intuitive operation
4 x axial
CNC-controlled adjustment and positioning of the tool holders in
conjunction with the memory function for tool holders
2,3,4,5
4 x radial CNC-controlled adjustment and positioning
of the tool holders in conjunction with the memory function for
tool holders 2,3,4,5
CNC - controlled adjustment and
positioning of the feed high/low in connection with the memory
function
Lubrication points for axial tool holder
adjustment. Central location of lubrication points on the front of
the machine.
Safety and
soundproofing -----------------------------------------------
Full safety fairing Electromagnetic locking of the safety
hood Interior light
Option: Complete tools for
planing, strip separation and profiling
(Technical
information according to the manufacturer - no
guarantee!)
The data for this ad was created
with ModulMWS - the software solution of LogoTech
oHG.
seller offer No. resale 1305-6857
|